MBR2070CT - MBR20100CT 20A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER Features • • • • • • Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead Free Finish/RoHS Compliant (Note 3) TO-220AB Dim Min Max A 14.48 15.75 B 10.00 10.40 C 2.54 3.43 D 5.90 6.40 E 2.80 3.93 G 12.70 14.27 H 2.40 2.70 J 0.69 0.93 K 3.54 3.78 L 4.07 4.82 M 1.15 1.39 N 0.30 0.50 P 2.04 2.79 Mechanical Data • • • • • • • • Case: TO-220AB Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Polarity: As Marked on Body Terminals: Finish – Tin. Solderable per MIL-STD-202, Method 208 Marking: Type Number Ordering Information: See Page 2 Weight: 2.24 grams (approximate) All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TC = 120°C Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Forward Voltage Drop @ IF = 10A, Tj = 125°C @ IF = 10A, Tj = 25°C @ IF = 20A, Tj = 125°C @ IF = 20A, Tj = 25°C Peak Reverse Current @ TA = 25°C at Rated DC Blocking Voltage (Note 4) @ TA = 125°C Typical Total Capacitance (Note 2) Symbol MBR 2070CT MBR 2080CT MBR 2090CT MBR 20100CT Unit VRRM VRWM VR 70 80 90 100 V VR(RMS) 49 56 63 70 V IO 20 A IFSM 150 A VFM IRM 0.75 0.85 0.85 0.95 0.10 100 V mA CT 1000 pF Typical Thermal Resistance Junction to Case (Note 1) RθJC 2.0 °C/W Voltage Rate of Change dV/dt 10000 V/μs Tj -55 to +150 °C TSTG -55 to +175 °C Operating Temperature Range Storage Temperature Range Notes: 1. 2. 3. 4. Thermal resistance junction to case mounted on heatsink. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC and per element. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test to minimize self-heating effect. DS30019 Rev. 7 - 2 1 of 2 www.diodes.com MBR2070CT-MBR20100CT © Diodes Incorporated Ordering Information Notes: (Note 5) Device Packaging Shipping MBR20xxCT* TO-220AB 50/Tube * xx = Device type, e.g. MBR2080CT 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30019 Rev. 7 - 2 2 of 2 www.diodes.com MBR2070CT-MBR20100CT © Diodes Incorporated