DIODES SBG1635CT-T-F

SPICE MODELS: SBG1630CT SBG1635CT SBG1640CT SBG1645CT
SBG1630CT - SBG1645CT
16A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Features
·
·
·
·
·
·
·
Guard Ring Die Construction for Transient Protection
Low Power Loss, High Efficiency
High Surge Capability
High Current Capability and Low Forward Voltage Drop
D2PAK
E
Surge Overload Rating to 175A Peak
A
For Use in Low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Applications
4
Lead Free Finish/RoHS Compliant (Note 3)
1
·
·
·
·
·
·
·
·
2
Dim
Min
Max
H
A
9.65
10.69
B
14.60
15.88
C
0.51
1.14
D
2.29
2.79
J
B
Mechanical Data
G
3
Case: D2PAK
M
Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
D
K
Moisture Sensitivity: Level 1 per J-STD-020C
C
Terminals: Finish - Tin. Solderable per MIL-STD-202,
Method 208 e3
L
PIN 1
Ordering Information on Page 2
PIN 2 & 4
PIN 3
Polarity: See Diagram
E
4.37
4.83
G
1.14
1.40
H
1.14
1.40
J
8.25
9.25
K
0.30
0.64
L
2.03
2.92
M
2.29
2.79
All Dimensions in mm
Marking: Type Number
Weight: 1.7 grams (approximate)
Maximum Ratings and Electrical Characteristics
@ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 4)
RMS Reverse Voltage
Symbol
SBG
1630CT
SBG
1635CT
SBG
1640CT
SBG
1645CT
Unit
VRRM
VRWM
VR
30
35
40
45
V
VR(RMS)
21
25
28
32
V
IO
16
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on rated load
IFSM
175
A
Forward Voltage, per Element
VFM
0.55
V
IRM
1.0
50
mA
CT
275
pF
RqJC
3.0
°C/W
Tj, TSTG
-65 to +125
°C
Average Rectified Output Current
Peak Reverse Current
at Rated DC Blocking Voltage (Note 4)
@ TC = 95°C
@ IF = 8.0A
@ Tj = 25°C
@ Tj = 125°C
Typical Total Capacitance (Note 2)
Typical Thermal Resistance Junction to Case (Note 1)
Operating and Storage Temperature Range
Notes:
1.
2.
3.
4.
Thermal resistance: junction to case mounted on heat sink.
Measured at 1.0MHz and applied reverse voltage of 4.0V DC, per element.
RoHS revision 13.2.2003. High Temperature Solder Exemption Applied, see EU Directive Annex Note 7.
Short duration pulse test used to minimize self-heating effect.
DS30090 Rev. 5 - 2
1 of 3
www.diodes.com
SBG1630CT - SBG1645CT
ã Diodes Incorporated
IF, INSTANTANEOUS FORWARD CURRENT (A)
20
I(AV), AVERAGE FWD CURRENT (A)
Total Package
16
12
Per Element
8
4
0
0
50
100
100
Tj = 125°C
10
Tj = 25°C
1.0
0.1
150
0
0.8
1.2
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics, Per Element
300
1000
Tj = 25°C
f = 1.0MHz
250
C , TOTAL CAPACITANCE (pF)
200
150
100
500
200
T
IFSM, PEAK FORWARD SURGE CURRENT (A)
TC, CASE TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
0.4
50
100
0
1
10
0.1
100
Notes:
10
100
VR, DC REVERSE VOLTAGE (V)
Fig. 4 Typical Total Capacitance, Per Element
NUMBER OF CYCLES AT 60Hz
Fig. 3 Max Non-Repetitive Surge Current
Ordering Information
1.0
(Note 5)
Device
Packaging
Shipping
SBG1630CT-T-F
D2PAK
800/Tape & Reel, 13-inch
SBG1635CT-T-F
D2PAK
800/Tape & Reel, 13-inch
SBG1640CT-T-F
D2PAK
800/Tape & Reel, 13-inch
SBG1645CT-T-F
D2PAK
800/Tape & Reel, 13-inch
5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02007.pdf.
DS30090 Rev. 5 - 2
2 of 3
www.diodes.com
SBG1630CT - SBG1645CT
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
DS30090 Rev. 5 - 2
3 of 3
www.diodes.com
SBG1630CT - SBG1645CT