ES3A/B - ES3D/B 3.0A SURFACE MOUNT SUPER-FAST RECTIFIER Features Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 100A Peak Ideally Suited for Automated Assembly Plastic Material: UL Flammability Classification Rating 94V-0 A Min Max Min Max A 3.30 3.94 5.59 6.22 B 4.06 4.57 6.60 7.11 C 1.96 2.21 2.75 3.18 D 0.15 0.31 0.15 0.31 D Case: Molded Plastic Terminals: Solder Plated Terminal - Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch SMB Weight: 0.093 grams (approx.) SMC Weight: 0.21 grams (approx.) Mounting Position: Any Marking: Type Number J G E H SMC Dim C Mechanical Data SMB B E 5.00 5.59 7.75 8.13 G 0.10 0.20 0.10 0.20 H 0.76 1.52 0.76 1.52 2.00 2.62 2.00 2.62 J All Dimensions in mm AB, BB, CB, DB Suffix Designates SMB Package A, B, C, D, Suffix Designates SMC Package Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol ES3A/B ES3B/B ES3C/B ES3D/B Unit VRRM VRWM VR 50 100 150 200 V VR(RMS) 35 70 105 140 V IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) IFSM 100 A Forward Voltage VFM 0.9 V IRM 10 500 A trr 25 ns Average Rectified Output Current Peak Reverse Current at Rated DC Blocking Voltage @ TT = 100C @ IF = 3.0A @ TA = 25C @ TA = 125C Reverse Recovery Time (Note 3) Typical Junction Capacitance (Note 2) Typical Thermal Resistance, Junction to Terminal (Note 1) Operating and Storage Temperature Range Notes: Cj 45 pF RJT 15 K/W Tj, TSTG -65 to +150 C 1. Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. DS14003 Rev. E1-2 1 of 2 ES3A/B - ES3D/B IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 3.0 2.0 1.0 0 25 75 50 100 125 150 10 1.0 0.1 Tj = 25°C Pulse Width: 300µs 0.01 175 0 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 120 IR, INSTANTANEOUS REVERSE CURRENT (A) IFSM, PEAK FORWARD SURGE CURRENT (A) TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.4 Single Half-Sine-Wave (JEDEC Method) 100 80 60 40 20 1000 Tj = 125°C 100 10 Tj = 25°C 1.0 0 1 10 0 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS14003 Rev. E1-2 2 of 2 ES3A/B - ES3D/B