PR1001G/L - PR1007G/L 1.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER Features · · · · · · · Glass Passivated Die Construction Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 30A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 B A A C D DO-41 Plastic Mechanical Data · · · · · · Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number DO-41 Weight: 0.35 grams (approx.) A-405 Weight: 0.20 grams (approx.) A-405 Dim Min Max Min A 25.40 ¾ 25.40 Max ¾ B 4.06 5.21 4.10 5.20 C 0.71 0.864 0.53 0.64 D 2.00 2.72 2.00 2.70 All Dimensions in mm “GL” Suffix Designates A-405 Package “G” Suffix Designates DO-41 Package Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PR1002 PR1003 PR1004 PR1005 PR1006 PR1007 Unit Symbol PR1001 G/GL G/GL G/GL G/GL G/GL G/GL G/GL Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Drop Peak Reverse Current at Rated DC Blocking Voltage @ IF = 1.0A @ TA = 25°C @ TA = 100°C VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 1.0 A IFSM 30 A VFM 1.3 V IRM 5.0 50 mA Reverse Recovery Time (Note 3) trr 150 Typical Junction Capacitance (Note 2) Cj 15 Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 250 500 8 ns pF RqJA 95 K/W Tj, TSTG -65 to +150 °C 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. DS27001 Rev. D1-2 1 of 2 PR1001G/L - PR1007G/L IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 1.0 0.8 0.6 0.4 0.2 Single phase half-wave 60 Hz resistive or inductive load 0 25 75 50 100 125 150 175 200 10 1.0 0.1 0.01 0.6 30 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC Method) Tj = 25°C f = 1.0MHz Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve Tj = 25°C Pulse width = 300µs 20 10 0 PR1001 - PR1004 10 PR1005 - PR1007 1 1 10 1 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100 trr 50Ω NI (Non-inductive) (-) 10Ω NI Device Under Test (+) +0.5A (-) 0A Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27001 Rev. D1-2 2 of 2 PR1001G/L - PR1007G/L