PR1501/S - PR1505/S 1.5A FAST RECOVERY RECTIFIER Features · · · · · · Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 50A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 · · · · A C D DO-41 Plastic Mechanical Data · · B A Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number DO-41 Weight: 0.3 grams (approx.) DO-15 Weight: 0.4 grams (approx.) Dim Min A B C DO-15 Max Min 25.40 ¾ 25.40 ¾ 4.06 5.21 5.50 7.62 0.71 0.864 0.686 0.889 2.00 2.72 2.60 3.60 D Max All Dimensions in mm “S” Suffix Designates DO-41 Package No Suffix Designates DO-15 Package Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 50°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Symbol PR 1501/S PR 1502/S PR 1503/S PR 1504/S PR 1505/S Unit VRRM VRWM VR 50 100 200 400 600 V VR(RMS) 35 70 140 280 420 V IO 1.5 A IFSM 50 A @ IF = 1.5A VFM 1.2 V @ TA = 25°C @ TA = 100°C IRM 5.0 100 mA Reverse Recovery Time (Note 3) trr 150 250 ns Typical Junction Capacitance (Note 2) Cj 20 10 pF Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: RqJA 35 K/W Tj, TSTG -65 to +150 °C 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. DS26011 Rev. B1-2 1 of 2 PR1501/S - PR1505/S IF, INSTANTANEOUS FWD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 10 1.5 1.2 0.9 0.6 0.3 Single phase half-wave 60 Hz resistive or inductive load 0 25 75 50 100 125 150 175 1.0 0.1 Tj = 25°C Pulse width = 300µs 0.01 200 0.6 1.2 1.4 100 Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC Method) TA = 25°C f = 1.0MHz Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve 60 0.8 40 20 0 PR1501 - PR1504 10 PR1505 1 1 10 1 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100 trr 50Ω NI (Non-inductive) (-) 10Ω NI Device Under Test (+) +0.5A (-) 0A Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS26011 Rev. B1-2 2 of 2 PR1501/S - PR1505/S