SPICE MODELS: RH02 RH04 RH06 RH02 - RH06 0.5A SURFACE MOUNT GLASS PASSIVATED FAST RECOVERY BRIDGE RECTIFIER Features · · · · · · Glass Passivated Die Construction Low Forward Voltage Drop MiniDIP Surge Overload Rating to 30A Peak Ideally Suited for Automatic Assembly L G Miniature Package Saves Space on PC Boards Lead Free Finish, RoHS Compliant (Note 4) B Mechanical Data · · · · · · D E Dim Min B 3.6 Max 4.0 C 0.15 0.35 D ¾ 0.20 E ¾ 7.0 Case: MiniDIP F ¾ 3.00 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 G 0.70 1.10 H 4.5 4.9 2.7 H Terminals: Finish ¾ Bright Tin. Plated Leads, Solderable per MIL-STD-202, Method 208 C J F K Polarity: As Marked on Case Marking: Type Number Weight: 0.125 grams (approx.) J 2.3 K 2.3 2.7 L 0.50 0.80 All Dimensions in mm Maximum Ratings and Electrical Characteristics Characteristic @ TA = 25°C unless otherwise specified Symbol RH02 RH04 RH06 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRMM VRWM VDC 200 400 600 V RMS Reverse Voltage VRMS 140 280 420 V Average Forward Rectified Current (Note 1) TA = @ 40°C Non-Repetitive Peak Forward Surge Current, 8.3 ms Single half-sine-wave Superimposed on Rated Load (JEDEC method) Instantaneous Voltage Drop @ 0.4A (per element) Peak Reverse Current at Rated DC Blocking Voltage (per element) @ TA = 25°C @ TA = 125°C IO 0.5 A IFSM 30 A VF 1.15 V IR 5.0 100 mA Maximum Reverse Recovery Time (Note 3) trr Typical Junction Capacitance (per element) (Note 2) Cj 13.0 pF RqJA 85 K/W Tj, TSTG -55 to +150 °C Typical Thermal Resistance, Junction to Ambient (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 150 250 ns Mounted on Glass Epoxy PC Board. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 V. trr test conditions: IF = 0.5A, IR = 1.0A, Irr = 0.25A. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS30137 Rev. 6 - 2 1 of 3 www.diodes.com RH02 - RH06 ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) 0.8 Alumina Substrate 0.6 0.4 Glass Epoxy PC Board 0.2 Resistive or Inductive Load 40 1.0 0.1 0.01 0 0 10 80 120 0.2 160 0.6 0.8 1.0 1.2 1.4 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per leg) 100 35 Tj = 25° C f = 1.0MHz 30 Cj, JUNCTION CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TA, AMBIENT TEMPERATURE (° C) Fig. 1 Output Current Derating Curve 0.4 20 10 TA = 25° C Single Half Sine-Wave Pulse Width = 5.3ms (JEDEC Method) 10 1 0 1.0 1 10 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Peak Forward Surge Current (per leg) 100 Tj = 125° C 10 1.0 Tj = 25° C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element) DS30137 Rev. 6 - 2 2 of 3 www.diodes.com RH02 - RH06 Ordering Information Notes: (Note 5) Device Packaging Shipping RH0x-T MiniDIP 3000/Tape & Reel 5. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. DS30137 Rev. 6 - 2 3 of 3 www.diodes.com RH02 - RH06