SPICE MODEL: SBL30L30CT SBL30L30CT 30A DUAL LOW VF SCHOTTKY BARRIER RECTIFIER NEW PRODUCT Features · · · · · · Low Power Loss, High Efficiency Guard Ring for Transient Protection TO-220AB High Surge Capability L Very Low Forward Voltage Drop B For Use in High Frequency Inverters, Free Wheeling, and Polarity Protection Applications M C D Lead Free Finish, RoHS Compliant (Note 1) K A Mechanical Data · · · · · · · · Case: TO-220AB 1 2 3 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 E G Moisture Sensitivity: Level 1 per J-STD-020C J N Terminals: Tin Finish. Solderable per MIL-STD-202, Method 208 e3 Polarity: See Diagram H H Marking: Type Number P Pin 1 Pin 2 Pin 3 Ordering Information: See Sheet 3 Case Weight: 2.24 grams (approximate) Dim Min Max A 14.22 15.88 B 9.65 10.67 C 2.54 3.43 D 5.84 6.86 E ¾ 6.35 G 12.70 14.73 H 2.29 2.79 J 0.51 1.14 K 3.53Æ 4.09Æ L 3.56 4.83 M 1.14 1.40 N 0.30 0.64 P 2.03 2.92 All Dimensions in mm Maximum Ratings @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Value Unit VRRM VRWM VR 30 V VR(RMS) 21 V IO 30 15 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Per Element IFSM 260 A Peak Repetitive Reverse Current Per Element at tP = 2ms, 1 KHz IRRM 1.0 A Voltage Rate of Change dV/dt 10,000 V/ms RqJC 1.5 0.8 °C/W Tj -65 to +150 °C TSTG -65 to +150 °C Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TC = 140°C Typical Thermal Resistance Junction to Case (Note 2) Total Device Per Element Per Diode Total Operating Temperature Range Storage Temperature Range Electrical Characteristics @ TA = 25°C unless otherwise specified Symbol Min Typ Max Unit V(BR)R 30 ¾ ¾ V IR = 1.5mA Forward Voltage Per Element VF ¾ ¾ ¾ ¾ ¾ ¾ 0.52 ¾ 0.46 0.38 0.57 0.50 V @ IF = 15A, Tj = 25°C @ IF = 15A, Tj = 125°C @ IF = 30A, Tj = 25°C @ IF = 30A, Tj = 125°C Peak Reverse Current Per Element (Note 3) IR ¾ ¾ ¾ ¾ 1.0 300 mA mA @ VR = 30V, Tj = 25°C @ VR = 30V, Tj = 125°C Characteristic Reverse Breakdown Voltage (Note 3) Notes: Test Condition 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex, Notes 5 and 7. 2. Thermal Resistance Junction to Case: Device mounted on 200x200x5mm aluminum plate. 3. Short duration test pulse used to minimize self-heating effect. DS30757 Rev. 5 - 2 1 of 3 www.diodes.com SBL30L30CT ã Diodes Incorporated IFSM, PEAK FORWARD SURGE CURRENT (A) IF(AV), AVERAGE FORWARD CURRENT (A) 30 Total Device 20 Per Element 10 T 300 8.3 ms single half-sine-wave 250 200 150 100 50 0 25 75 50 100 125 175 150 IR, INSTANTANEOUS REVERSE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (mA) 100,000 TA = 150ºC TA = 125ºC 1000 TA = 85ºC TA = 25ºC 100 TA = -40ºC 10 TA = -65ºC 0.1 0.2 0.3 0.4 20 10 50 100 1 TA = 150ºC 0.1 TA = 85ºC 1m 0.6 0.5 TA = 125ºC 10m 1 0 5 NUMBER OF CYCLES AT 60Hz Fig. 2 Maximum Non-Repetitive Surge Current, Per Element TC, CASE TEMPERATURE (° C) Fig. 1 Forward Current Derating Curve 10,000 2 1 0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 3 Typical Forward Characteristics, Per Element TA = 25ºC TA = -40ºC TA = -65ºC 0 5 10 15 20 25 30 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Characteristics, Per Element 10,000 f = 1MHz CT, TOTAL CAPACITANCE (pF) NEW PRODUCT 40 1000 100 0 5 10 15 20 25 30 VR, REVERSE VOLTAGE (V) Fig. 5 Typical Total Capacitance, Per Element DS30757 Rev. 5 - 2 2 of 3 www.diodes.com SBL30L30CT NEW PRODUCT Ordering Information Notes: (Note 4) Device Packaging Shipping SBL30L30CT TO-220AB 50/Tube 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30757 Rev. 5 - 2 3 of 3 www.diodes.com SBL30L30CT