ONSEMI MBR1035

MBR1035, MBR1045
SWITCHMODE™
Power Rectifiers
Features and Benefits
•
•
•
•
•
•
Low Forward Voltage
Low Power Loss/High Efficiency
High Surge Capacity
175°C Operating Junction Temperature
10 A Total
Pb−Free Packages are Available*
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIERS
10 AMPERES
35 to 45 VOLTS
Applications
• Power Supply – Output Rectification
• Power Management
• Instrumentation
3
1, 4
Mechanical Characteristics
•
•
•
•
•
•
Case: Epoxy, Molded
Epoxy Meets UL 94, V−0 @ 0.125 in
Weight: 1.9 Grams (Approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead Temperatures for Soldering Purposes: 260°C Max. for 10 Seconds
ESD Rating:
Human Body Model 3B
Machine Model C
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
MARKING
DIAGRAM
4
TO−220AC
CASE 221B
PLASTIC
AY WWG
B10x5
KA
1
3
A
Y
WW
G
B10x5
x
KA
= Assembly Location
= Year
= Work Week
= Pb−Free Package
= Device Code
= 3 or 4
= Diode Polarity
ORDERING INFORMATION
Device
MBR1035
MBR1035G
MBR1045
MBR1045G
© Semiconductor Components Industries, LLC, 2007
February, 2007 − Rev. 7
1
Package
Shipping
TO−220
50 Units/Rail
TO−220
(Pb−Free)
50 Units/Rail
TO−220
50 Units/Rail
TO−220
(Pb−Free)
50 Units/Rail
Publication Order Number:
MBR1035/D
MBR1035, MBR1045
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
MBR1035
MBR1045
VRRM
VRWM
VR
V
Average Rectified Forward Current
(TC = 135°C, Per Device)
IF(AV)
Peak Repetitive Forward Current,
(Square Wave, 20 kHz, TC = 135°C)
IFRM
10
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
IFSM
150
A
Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz)
IRRM
1.0
A
Storage Temperature Range
Tstg
−65 to +175
°C
Operating Junction Temperature (Note 1)
TJ
−65 to +175
°C
35
45
A
10
Voltage Rate of Change
(Rated VR)
dv/dt
V/ms
10,000
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.
THERMAL CHARACTERISTICS
Characteristic
Conditions
Symbol
Max
Unit
°C/W
Maximum Thermal Resistance, Junction−to−Case
Min. Pad
RqJC
2.0
Maximum Thermal Resistance, Junction−to−Ambient
Min. Pad
RqJA
60
Min
Typical
Max
−
−
−
0.55
0.67
0.78
0.57
0.72
0.84
−
−
5.3
0.008
15
0.1
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Instantaneous Forward Voltage (Note 2)
(iF = 10 Amps, Tj = 125°C)
(iF = 20 Amps, Tj = 125°C)
(iF = 20 Amps, Tj = 25°C)
vF
Instantaneous Reverse Current (Note 2)
(Rated dc Voltage, Tj = 125°C)
(Rated dc Voltage, Tj = 25°C)
iR
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
http://onsemi.com
2
Unit
V
mA
MBR1035, MBR1045
100
100
TJ = 150°C
TJ = 150°C
70
70
100°C
30
30
20
20
10
7.0
5.0
3.0
2.0
1.0
10
7.0
5.0
3.0
2.0
1.0
0.7
0.7
0.5
0.5
0.3
0.3
0.2
0.2
0.1
25°C
100°C
50
25°C
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
50
0.1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.2
0.4
0.6
0.8
1.0
1.2
vF, INSTANTANEOUS VOLTAGE (VOLTS)
vF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Maximum Forward Voltage
Figure 2. Typical Forward Voltage
http://onsemi.com
3
1.4
MBR1035, MBR1045
IFSM , PEAK HALF−WAVE CURRENT (AMPS)
100
IR , REVERSE CURRENT (mA)
TJ = 150°C
125°C
10
100°C
1.0
75°C
0.1
25°C
0.01
0.001
5.0
10
20
25
30
35
40
45
70
50
30
20
50
1.0
2.0
3.0
5.0 7.0 10
20
30
50
Figure 3. Maximum Reverse Current
Figure 4. Maximum Surge Capability
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
NUMBER OF CYCLES AT 60 Hz
20
RATED VOLTAGE APPLIED
I
15
I
PK + p(RESISTIVELOAD)
AV
I
SQUARE
WAVE
PK + 5
10 (CAPACITIVELOAD)
I
AV
10
5.0
20
dc
0
120
130
140
150
16
70 100
RATED VOLTAGE APPLIED
14
I
12
I
PK + p(RESISTIVELOAD)
AV
10
SQUARE
WAVE
8.0
6.0
dc
4.0
I
(CAPACITIVELOAD) PK + 20, 10, 5
I
2.0
AV
0
160
0
20
40
60
80
100
120
140
TC, CASE TEMPERATURE (°C)
TA, AMBIENT TEMPERATURE (°C)
Figure 5. Current Derating, Infinite Heatsink
Figure 6. Current Derating, RqJA = 16°C/W
10
9.0
SINE WAVE
RESISTIVE LOAD
8.0
dc
SQUARE
WAVE
I
7.0
(CAPACITIVELOAD) PK + 5
I
6.0
AV
10
5.0
20
4.0
3.0
TJ = 150°C
2.0
1.0
0
0
100
VR, REVERSE VOLTAGE (VOLTS)
110
PF(AV) , AVERAGE FORWARD POWER DISSIPATION (WATTS)
15
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
0
200
2.0
4.0
6.0
8.0
10
12
14
16
5.0
RATED VOLTAGE APPLIED
RqJA = 60°C/W
4.0
I
I
3.0
PK + p(RESISTIVELOAD)
AV
SQUARE
WAVE
2.0
dc
1.0
I
(CAPACITIVELOAD) PK + 20, 10, 5
I
AV
0
0
20
40
60
80
100
120
140
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
TA, AMBIENT TEMPERATURE (°C)
Figure 7. Forward Power Dissipation
Figure 8. Current Derating, Free Air
http://onsemi.com
4
160
160
1.0
0.7
0.5
0.3
0.2
Ppk
tp
0.1
0.07
0.05
Ppk
TIME
t1
DUTY CYCLE, D = tp/t1
PEAK POWER, Ppk, is peak of an
equivalent square power pulse.
DTJL = Ppk • RqJL [D + (1 − D) • r(t1 + tp) + r(tp) − r(t1)] where:
DTJL = the increase in junction temperature above the lead temperature.
r(t) = normalized value of transient thermal resistance at time, t, i.e.:
r(t1 + tp) = normalized value of transient thermal resistance at time,
t1 + tp.
0.03
0.02
0.01
0.01
0.1
1.0
10
100
t, TIME (ms)
Figure 9. Thermal Response
1500
1000
C, CAPACITANCE (pF)
r(t), TRANSIENT THERMAL RESISTANCE
(NORMALIZED)
MBR1035, MBR1045
700
500
MAXIMUM
300
TYPICAL
200
150
0.05 0.1
0.2
0.5
1.0
2.0
5.0
10
VR, REVERSE VOLTAGE (VOLTS)
Figure 10. Capacitance
http://onsemi.com
5
20
50
1000
MBR1035, MBR1045
PACKAGE DIMENSIONS
TO−220
PLASTIC
CASE 221B−04
ISSUE D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
C
B
Q
F
T
S
DIM
A
B
C
D
F
G
H
J
K
L
Q
R
S
T
U
4
A
1
U
3
H
K
L
D
G
R
J
INCHES
MIN
MAX
0.595
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.147
0.190
0.210
0.110
0.130
0.018
0.025
0.500
0.562
0.045
0.060
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
STYLE 1:
PIN 1.
2.
3.
4.
MILLIMETERS
MIN
MAX
15.11
15.75
9.65
10.29
4.06
4.82
0.64
0.89
3.61
3.73
4.83
5.33
2.79
3.30
0.46
0.64
12.70
14.27
1.14
1.52
2.54
3.04
2.04
2.79
1.14
1.39
5.97
6.48
0.000
1.27
CATHODE
N/A
ANODE
CATHODE
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MBR1035/D