MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 MBRD320, MBRD340 and MBRD360 are Preferred Devices SWITCHMODE Power Rectifiers http://onsemi.com DPAK Surface Mount Package SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES, 20 − 60 VOLTS Designed for use as output rectifiers, free wheeling, protection and steering diodes in switching power supplies, inverters and other inductive switching circuits. These state−of−the−art devices have the following features: 1 4 Features • • • • 3 Pb−Free Packages are Available Extremely Fast Switching Extremely Low Forward Drop Platinum Barrier with Avalanche Guardrings MARKING DIAGRAM Mechanical Characteristics • Case: Epoxy, Molded • Weight: 0.4 Gram (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes; 260°C Max. for 10 Seconds Shipped 75 Units Per Plastic Tube Available in 16 mm Tape and Reel, 2500 Units Per Reel, by Adding a “T4’’ Suffix to the Part Number 4 DPAK CASE 369C 1 2 YWW B 3x0 3 Y WW x = Year = Work Week = 2, 3, 4, 5 or 6 ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2004 December, 2004 − Rev. 4 1 Publication Order Number: MBRD320/D MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 MAXIMUM RATINGS MBRD Rating Symbol 320 330 340 350 360 20 30 40 50 60 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR Average Rectified Forward Current (TC = +125°C, Rated VR) IF(AV) 3 A Peak Repetitive Forward Current, TC = +125°C (Rated VR, Square Wave, 20 kHz) IFRM 6 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 75 A Peak Repetitive Reverse Surge Current (2 s, 1 kHz) IRRM 1 A TJ −65 to +150 °C Storage Temperature Range Tstg −65 to +175 °C Voltage Rate of Change (Rated VR) dv/dt 10,000 V/s Operating Junction Temperature Range V Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Maximum Thermal Resistance, Junction−to−Case RJC 6 °C/W Maximum Thermal Resistance, Junction−to−Ambient (Note 1) RJA 80 °C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 2) iF = 3 Amps, TC = +25°C iF = 3 Amps, TC = +125°C iF = 6 Amps, TC = +25°C iF = 6 Amps, TC = +125°C VF Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TC = +25°C) (Rated dc Voltage, TC = +125°C) iR V 0.6 0.45 0.7 0.625 mA 0.2 20 1. Rating applies when surface mounted on the minimum pad size recommended. 2. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%. http://onsemi.com 2 MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 ORDERING INFORMATION Package Shipping† DPAK 75 Units / Rail MBRD320G DPAK (Pb−Free) 75 Units / Rail MBRD320RL DPAK 1800 Tape & Reel DPAK (Pb−Free) 1800 Tape & Reel DPAK 2500 Tape & Reel DPAK (Pb−Free) 2500 Tape & Reel MBRD330 DPAK 75 Units / Rail MBRD330RL DPAK 1800 Tape & Reel MBRD330T4 DPAK 2500 Tape & Reel MBRD340 DPAK 75 Units / Rail MBRD340G DPAK (Pb−Free) 75 Units / Rail MBRD340RL DPAK 1800 Tape & Reel DPAK (Pb−Free) 1800 Tape & Reel DPAK 2500 Tape & Reel DPAK (Pb−Free) 2500 Tape & Reel MBRD350 DPAK 75 Units / Rail MBRD350RL DPAK 1800 Tape & Reel MBRD350T4 DPAK 2500 Tape & Reel MBRD360 DPAK 75 Units / Rail MBRD360G DPAK (Pb−Free) 75 Units / Rail MBRD360RL DPAK 1800 Tape & Reel DPAK (Pb−Free) 1800 Tape & Reel DPAK 2500 Tape & Reel DPAK (Pb−Free) 2500 Tape & Reel Device MBRD320 MBRD320RLG MBRD320T4 MBRD320T4G MBRD340RLG MBRD340T4 MBRD340T4G MBRD360RLG MBRD360T4 MBRD360T4G †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 3 MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 TYPICAL CHARACTERISTICS 100 I R , REVERSE CURRENT (mA) 40 20 10 10 TJ = 150°C 125°C 4.0 2.0 1.0 100°C 75°C 0.4 0.2 0.1 0.04 0.02 0.01 0.004 0.002 0.001 25°C 0 40 20 30 50 VR, REVERSE VOLTAGE (VOLTS) 10 70 60 *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these curves if VR is sufficient below rated VR. 150°C TJ = 25°C Figure 2. Typical Reverse Current 125°C PF(AV) , AVERAGE POWER DISSIPATION (WATTS) i F, INSTANTANEOUS FORWARD CURRENT (AMPS) 100 75°C 1.0 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 10 SINE WAVE 9.0 TJ = 150°C 8.0 5 7.0 10 6.0 5.0 dc IPK/IAV = 20 SQUARE WAVE 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 vF, INSTANTANEOUS VOLTAGE (VOLTS) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 1. Typical Forward Voltage Figure 3. Average Power Dissipation http://onsemi.com 4 9.0 10 I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 8.0 RATED VOLTAGE APPLIED 7.0 RJC = 6°C/W 6.0 TJ = 150°C SINE WAVE OR SQUARE WAVE 5.0 4.0 3.0 dc 2.0 1.0 0 80 90 100 110 120 140 130 150 160 4.0 RJA = 80°C/W SURFACE MOUNTED ON MIN. PAD SIZE RECOMMENDED TJ = 150°C 3.5 3.0 dc SQUARE WAVE OR SINE WAVE VR = 25 V 2.5 TJ = 125°C 2.0 1.5 TJ = 150°C 1.0 0.5 0 0 20 40 60 80 100 120 140 TC, CASE TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C) Figure 4. Current Derating, Case Figure 5. Current Derating, Ambient 1K 700 500 C, CAPACITANCE (pF) I F(AV) , AVERAGE FORWARD CURRENT (AMPS) MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 300 200 TJ = 25°C 100 70 50 30 20 10 0 10 20 30 40 50 VR, REVERSE VOLTAGE (VOLTS) Figure 6. Typical Capacitance http://onsemi.com 5 60 70 160 MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 PACKAGE DIMENSIONS DPAK CASE 369C ISSUE O −T− C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE E R 4 Z A S 1 2 DIM A B C D E F G H J K L R S U V Z 3 U K F J L H D G 2 PL 0.13 (0.005) M INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.180 0.215 0.025 0.040 0.020 −−− 0.035 0.050 0.155 −−− MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.57 5.45 0.63 1.01 0.51 −−− 0.89 1.27 3.93 −−− T SOLDERING FOOTPRINT* 6.20 0.244 3.0 0.118 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 SCALE 3:1 mm inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SWITCHMODE is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 6 For additional information, please contact your local Sales Representative. MBRD320/D