DCP69A/-16 NOT RECOMMENDED FOR NEW DESIGNS, USE DCP69/-16 PNP SURFACE MOUNT TRANSISTOR Features • • • • • • Epitaxial Planar Die Construction Complementary NPN Type Available (DCP68) Ideally Suited for Automated Assembly Processes Ideal for Medium Power Switching or Amplification Applications Lead Free By Design/RoHS Compliant (Note 1) "Green" Device (Note 2) 3 2 1 4 Mechanical Data • • • • • • • COLLECTOR 3 E Case: SOT-223 Case Material: Molded Plastic, "Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Matte Tin annealed over Copper leadframe (Lead Free Plating). Solderable per MIL-STD -202, Method 208 Marking & Type Code Information: See Page 3 Ordering Information: See Page 3 Weight: 0.115 grams (approximate) Maximum Ratings 2,4 2 C C 4 1 1 B BASE 3 EMITTER TOP VIEW Schematic and Pin Configuration @TA = 25°C unless otherwise specified Characteristic Symbol VCBO VCEO VEBO IC Value -25 -20 -5.0 -1.0 Units V V V A Characteristic Total Power Dissipation @ TA = 25ºC (Note 3) Thermal Resistance, Junction to Ambient Air @ TA = 25°C (Note 3) Symbol Pd RθJA Value 1 125 Unit W °C/W Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Thermal Characteristics Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic OFF CHARACTERISTICS (Note 4) Collector-Emitter Breakdown Voltage Symbol Min Typ Max V(BR)CES -25 — — V IC = -100μA, IE = 0 Collector-Emitter Breakdown Voltage V(BR)CEO -20 — — V IC = -1.0mA, IB = 0 Collector-Base Breakdown Voltage V(BR)CBO -25 — — V IC = -10μA, IE = 0 Emitter-Base Breakdown Voltage V(BR)EBO -5.0 — — V IE = -10μA, IC = 0 Collector-Base Cutoff Current ICBO — — -100 nA VCB = -25V, IE = 0 Emitter-Base Cutoff Current ON CHARACTERISTICS (Note 4) IEBO — — -10 μA VEB = -5.0V, IC = 0 hFE 50 85 40 — — — — 375 — 100 — 250 — — -0.5 — -0.6 — — — -1.0 — 250 — DC Current Gain DCP69A, DCP69A-16 DCP69A-16 Collector-Emitter Saturation Voltage Base-Emitter Turn-On Voltage VCE(SAT) VBE (ON) Unit Test Condition — IC = -5.0mA, VCE = -10V IC = -500mA, VCE = -1.0V IC = -1.0A, VCE = -1.0V IC = -500mA, VCE = -1.0V V V IC = -1.0A, IB = -100mA IC = -5mA, VCE = 10V IC = -1.0A, VCE = -1.0V SMALL SIGNAL CHARACTERISTICS Current Gain-Bandwidth Product Notes: fT MHz IC = -100mA, VCE = -5.0V f = 100MHz 1. No purposefully added lead. 2. Diodes Inc.'s "Green" Policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Device mounted on FR-4 PCB; pad layout as shown on page 4 or in Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 4. Measured under pulsed conditions. Pulse width = 300μs. Duty cycle < 2%. DS31102 Rev. 6 - 3 1 of 4 www.diodes.com DCP69A/-16 © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGNS, USE DCP69/-16 Typical Characteristics @TA = 25°C unless otherwise specified PD, POWER DISSIPATION (W) 1.0 0.8 0.6 0.4 0.2 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Dissipation vs. Ambient Temperature (Note 3) 0 -VCE, COLLECTOR-EMITTER VOLTAGE (V) Fig. 2 Typical Collector Current vs. Collector-Emitter Voltage 0 -IC, COLLECTOR CURRENT (A) Fig. 4 Typical Collector-Emitter Saturation Voltage vs. Collector Current -IC, COLLECTOR CURRENT (A) Fig. 3 Typical DC Current Gain vs. Collector Current 1 -IC, COLLECTOR CURRENT (A) Fig. 5 Typical Base-Emitter Turn-On Voltage vs. Collector Current DS31102 Rev. 6 - 3 -IC, COLLECTOR CURRENT (A) Fig. 6 Typical Base-Emitter Saturation Voltage vs. Collector Current 2 of 4 www.diodes.com DCP69A/-16 © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGNS, USE DCP69/-16 fT, GAIN-BANDWIDTH PRODUCT (MHz) 300 250 200 150 100 VCE = -5V f = 100MHz 50 0 0 VR, REVERSE VOLTAGE (V) Fig. 7 Typical Capacitance Characteristics Ordering Information Fig. 8 Typical Gain-Bandwidth Product vs. Collector Current Packaging SOT-223 SOT-223 DCP69A-13 DCP69A-16-13 5. 100 (Note 5) Device Notes: 20 40 60 80 -IC, COLLECTOR CURRENT (mA) Shipping 2500/Tape & Reel 2500/Tape & Reel For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information (Top View) XXX = Product type marking code ex. YWW XXX P12A = DCP69A P12A-16 = DCP69A-16 = Manufacturer’s code marking YWW = Date code marking Y = Last digit of year ex: 7 = 2007 WW = Week code 01 - 52 Package Outline Dimensions SOT-223 Dim Min Max Typ A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70 C 0.20 0.30 0.25 D 6.45 6.55 6.50 E 3.45 3.55 3.50 E1 6.90 7.10 7.00 e — — 4.60 e1 — — 2.30 L 0.85 1.05 0.95 Q 0.84 0.94 0.89 All Dimensions in mm DS31102 Rev. 6 - 3 3 of 4 www.diodes.com DCP69A/-16 © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGNS, USE DCP69/-16 Suggested Pad Layout (Based on IPC-SM-782) (Unit: mm) IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS31102 Rev. 6 - 3 4 of 4 www.diodes.com DCP69A/-16 © Diodes Incorporated