PDU620CT 6A DUAL ULTRA-FAST RECOVERY RECTIFIER PowerDI ä5 Features Mechanical Data · · · · · · · · · Case: PowerDIä5 · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · Polarity: See Diagram on Page 4 Glass Passivated Die Construction Ultra-Fast Recovery Time for High Efficiency High Maximum Junction Temperature High Forward Surge Current Capability Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.096 grams (approximate) BOTTOM VIEW TOP VIEW Maximum Ratings e3 @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also figure 4) per element total device Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load per element Symbol Value Unit VRRM VRWM VR 200 V VR(RMS) 141 V IO 3 6 A IFSM 90 A Thermal Characteristics Characteristic Thermal Resistance Junction to Soldering Point Symbol Typ Max Unit RqJS ¾ 3.0 °C/W Thermal Resistance Junction to Ambient Air (Note 2) TA = 25°C RqJA 80 ¾ °C/W Thermal Resistance Junction to Ambient Air (Note 3) TA = 25°C RqJA 65 ¾ °C/W Thermal Resistance Junction to Ambient Air (Note 4) TA = 25°C RqJA 45 ¾ °C/W Operating Temperature Range Storage Temperature Range Notes: 1. 2. 3. 4. Tj -65 to +175 °C TSTG -65 to +175 °C RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm. DS30622 Rev. 4 - 2 PowerDI is a trademark of Diodes Incorporated. 1 of 4 www.diodes.com PDU620CT ã Diodes Incorporated Electrical Characteristics @ TA = 25°C unless otherwise specified Characteristic Symbol Value Unit V(BR)R 200 V IR = 5mA Minimum Reverse Breakdown Voltage (Note 5) Test Condition Maximum Forward Voltage per element VFM 1.00 0.96 1.20 1.13 V IF = 3A, TS = 25°C IF = 3A, TS = 125°C IF = 6A, TS = 25°C IF = 6A, TS = 125°C Maximum Reverse Leakage Current (Note 5) per element IRM 5 250 mA TS = 25°C, VR = 200V TS = 125°C, VR = 200V trr 25 ns IF = 0.5A, IR = 1.0A IRR = 0.25A (See figure 7) Maximum Reverse Recovery Time IF, INSTANTANEOUS FORWARD CURRENT (A) Notes: 5. Short duration test pulse used to minimize self-heating effect. 100 1,000 Tj = 175°C Tj = 175°C 10 100 Tj = 150°C 1 10 Tj = 125°C Tj = 125°C 100m 0.1 Tj = 25°C 1m Tj = 85°C 1 Tj = 85°C 10m Tj = 25°C 0.01 Tj = -65°C Tj = -65°C 0.001 0 0.4 0.8 1.6 1.2 0 100 50 200 150 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics, per element VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics, per element 240 3.75 f = 1MHz IF, DC FORWARD CURRENT (A) 210 CT, TOTAL CAPACITANCE (pF) Tj = 150°C 180 150 120 90 60 30 3.0 Note 3 Note 2 2.25 1.5 0.75 0 0 10 20 30 40 0 VR, REVERSE VOLTAGE (V) Fig. 3 Typical Total Capacitance vs. Reverse Voltage, per element DS30622 Rev. 4 - 2 PowerDI is a trademark of Diodes Incorporated. 2 of 4 www.diodes.com 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 4 DC Forward Current Derating, per element PDU620CT 250 IPK = 1 (DC) IAV Note 2 VR, DC REVERSE VOLTAGE (V) PF, FORWARD POWER DISSIPATION (W) 6 4.5 3 1.5 200 150 100 50 0 0 0 1.5 4.5 3 6 50 0 7.5 150 100 200 TA, DERATED AMBIENT TEMPERATURE (°C) Fig. 6 Operating Temperature Derating IF, FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation, per element trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 7 Reverse Recovery Time Characteristic and Test Circuit Ordering Information Notes: (Note 6) Device Packaging Shipping PDU620CT-13 PowerDIä5 5000/Tape & Reel 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information U620CT YYWWK U620CT = Product type marking code = Manufacturers’ code marking YYWW = Date code marking YY = Last digit of year ex: 06 for 2006 WW = Week code 01 to 52 K = Factory Designator DS30622 Rev. 4 - 2 PowerDI is a trademark of Diodes Incorporated. 3 of 4 www.diodes.com PDU620CT Package Outline Dimensions A D A2 b2 PowerDIä5 L1 E E1 L1 e A2 b1 b1 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 D D2 b2 E L E2 e E1 E E2 W L1 e b1 b1 3.05 NOM 6.40 6.60 1.84 NOM 5.30 5.45 3.55 NOM L 0.75 0.95 L1 0.50 0.65 W 1.20 1.50 All Dimensions in mm LEFT PIN RIGHT PIN BOTTOMSIDE HEAT SINK TOP VIEW IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30622 Rev. 4 - 2 PowerDI is a trademark of Diodes Incorporated. 4 of 4 www.diodes.com PDU620CT