SPICE MODELS: KBP005G KBP01G KBP02G KBP04G KBP06G KBP08G KBP10G KBP2005G - KBP210G 2.0A GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · · Glass Passivated Die Construction KBP High Case Dielectric Strength of 1500VRMS Low Reverse Leakage Current Surge Overload Rating to 65A Peak L Ideal for Printed Circuit Board Applications A J UL Listed Under Recognized Component Index, File Number E94661 Lead Free Finish, RoHS Compliant (Note 3) H · · G · · · · _ + Case: KBP B N C D Max 14.25 14.75 B 10.20 10.60 2.29 Typical D 14.25 14.73 E 3.56 4.06 G 0.76 0.86 H 1.17 1.42 2.8 X 45° Chamfer J P Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Tin. Plated Leads, Solderable per MIL-STD-202, Method 208 e3 Min A C M Mechanical Data · · K Dim K 0.80 1.10 L 3.35 3.65 3° Nominal M E 2° Nominal N 0.30 P Polarity: Marked on Body 0.64 All Dimensions in mm Ordering Information: See Last Page Marking: Type Number Weight: 1.52 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. KBP Symbol 2005G Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TC = 105°C KBP 201G KBP 202G KBP 204G KBP 206G KBP 208G KBP 210G Unit V VRRM VRWM VR 50 100 200 400 600 800 1000 VR(RMS) 35 70 140 280 420 560 700 V IO 2.0 A Non-Repetitive Peak Forward Surge Current, 8.3 ms single half-sine-wave superimposed on rated load IFSM 65 A Forward Voltage per element VFM 1.1 V IRM 5.0 500 µA Peak Reverse Current at Rated DC Blocking Voltage @ IF = 2.0A @ TC = 25°C @ TC = 125°C Typical Total Capacitance per Element (Note 2) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range Notes: CT 25 pF RqJC 14 °C/W Tj, TSTG -65 to +150 °C 1. Thermal resistance from junction to case per element. Unit mounted on 75 x 75 x 1.6mm aluminum plate heat sink. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS21205 Rev. 10 - 2 1 of 3 www.diodes.com KBP2005G-KBP210G ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 2.0 1.5 Lead Case 1.0 Ambient 0.5 0 0 50 100 10 TJ = 150°C TJ = 25°C 1.0 0.1 0 0 150 0.4 0.6 0.8 100 100 CT, TOTAL CAPACITANCE (pF) Tj = 150°C Single Half Sine Wave 80 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics T, TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) 0.2 60 40 20 Tj = 25°C f = 1MHz 10 1 0 1 10 1 100 IR, INSTANTANEOUS REVERSE CURRENT (mA) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Forward Surge Current 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, Per Element 10,000 1000 Tj = 150°C 100 Tj = 125°C Tj = 100°C 10 1.0 Tj = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics DS21205 Rev. 10 - 2 2 of 3 www.diodes.com KBP2005G-KBP210G Ordering Information (Note 4) Notes: Device Packaging Shipping KBP2005G KBP 35 pieces per Tube KBP201G KBP 35 pieces per Tube KBP202G KBP 35 pieces per Tube KBP204G KBP 35 pieces per Tube KBP206G KBP 35 pieces per Tube KBP208G KBP 35 pieces per Tube KBP210G KBP 35 pieces per Tube 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21205 Rev. 10 - 2 3 of 3 www.diodes.com KBP2005G-KBP210G