NL17SZ14 Single Inverter with Schmitt Trigger The NL17SZ14 is a single inverter with Schmitt trigger in two tiny footprint packages. The device performs much as LCX multi-gate products in speed and drive. • • • • • • http://onsemi.com Tiny SOT- 353 and SOT- 553 Packages Source/Sink 24 mA at 3.0 V Over-Voltage Tolerant Inputs and Outputs Pin For Pin with NC7SZ14 Designed for 1.65 V to 5.5 V VCC Operation Chip Complexity: FET = 20 MARKING DIAGRAMS 5 LAd 1 SOT-353/SC70-5/SC-88A DF SUFFIX CASE 419A NC 1 IN A 2 GND 3 5 Pin 1 d = Date Code VCC LA D 4 SOT-553 XV5 SUFFIX CASE 463B OUT Y LA D Figure 1. Pinout IN A = Device Marking = One Digit Date Code OUT Y PIN ASSIGNMENT 1 Figure 2. Logic Symbol NC 2 IN A 3 GND 4 OUT Y 5 VCC A Input Y Output L H H L ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. Semiconductor Components Industries, LLC, 2003 May, 2003 - Rev. 4 1 Publication Order Number: NL17SZ14/D NL17SZ14 MAXIMUM RATINGS Symbol Characteristics Value Unit 0.5 to 7.0 V 0.5 ≤ VI ≤ 7.0 V 0.5 ≤ VO ≤ 7.0 V VI < GND 50 mA VO < GND 50 mA DC Output Sink Current 50 mA DC Supply Current per Supply Pin 100 mA IGND DC Ground Current per Ground Pin 100 mA TSTG Storage Temperature Range 65 to 150 °C PD Power Dissipation in Still Air SOT-353 SOT-553 186 135 mW JA Thermal Resistance SOT- 353 SOT- 553 350 496 °C/W TL Lead Temperature, 1 mm from Case for 10 Seconds 260 °C TJ Junction Temperature under Bias 150 °C MSL Moisture Sensitivity Level 1 FR Flammability Rating ESD ESD Classification VCC DC Supply Voltage VI DC Input Voltage VO DC Output Voltage IIK DC Input Diode Current IOK DC Output Diode Current IO ICC Output in High or LOW State (Note 1) Oxygen Index: 28 to 34 UL 94 V-0 @ 0.125 in Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) Class Z Class A N/A Maximum Ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute maximum-rated conditions is not implied. Functional operation should be restricted to the Recommended Operating Conditions. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-1 inch, 2-ounce copper trace with no air flow. 2. Tested to EIA/JESD22-A114-A, rated to EIA/JESD22-A114-B. 3. Tested to EIA/JESD22-A115-A, rated to EIA/JESD22-A115-A. 4. Tested to JESD22-C101-A. RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC Supply Voltage VI Input Voltage VO Output Voltage TA Operating Free-Air Temperature t/V Input Transition Rise or Fall Rate Operating Data Retention Only (High or LOW State) VCC = 2.5 V 0.2 V VCC = 3.0 V 0.3 V VCC = 5.0 V 0.5 V http://onsemi.com 2 Min Max Unit 1.65 1.5 5.5 5.5 V 0 5.5 V 0 5.5 V 40 85 °C 0 0 0 No Limit No Limit No Limit ns/V NL17SZ14 DC ELECTRICAL CHARACTERISTICS Symbol VT VT VH VOH VOL Parameter Min Typ Max Min Max Unit 1.65 0.6 1.0 1.4 0.6 1.4 V 2.3 1.0 1.5 1.8 1.0 1.8 2.7 1.2 1.7 2.0 1.2 2.0 3.0 1.3 1.9 2.2 1.3 2.2 4.5 1.9 2.7 3.1 1.9 3.1 5.5 2.2 3.3 3.6 2.2 3.6 1.65 0.2 0.5 0.8 0.2 0.8 2.3 0.4 0.75 1.15 0.4 1.15 2.7 0.5 0.87 1.4 0.5 1.4 3.0 0.6 1.0 1.5 0.6 1.5 4.5 1.0 1.5 2.0 1.0 2.0 5.5 1.2 1.9 2.3 1.2 2.3 1.65 0.1 0.48 0.9 0.1 0.9 2.3 0.25 0.75 1.1 0.25 1.1 2.7 0.3 0.83 1.15 0.3 1.15 3.0 0.4 0.93 1.2 0.4 1.2 4.5 0.6 1.2 1.5 0.6 1.5 5.5 0.7 1.4 1.7 0.7 1.7 IOH = -100 A 1.65 to 5.5 VCC - 0.1 VCC VCC - 0.1 IOH = -3 mA 1.65 1.29 1.52 1.29 IOH = 8 mA 2.3 1.9 2.1 1.9 IOH = 12 mA 2.7 2.2 2.4 2.2 IOH = 16 mA 3.0 2.4 2.7 2.4 IOH = 24 mA 3.0 2.3 2.5 2.3 IOH = 32 mA 4.5 3.8 4.0 3.8 IOL = 100 A 1.65 to 5.5 0.0 0.1 0.1 IOL = 4 mA 1.65 0.08 0.24 0.24 IOL = 8 mA 2.3 0.2 0.3 0.3 IOL = 12 mA 2.7 0.22 0.4 0.4 IOL = 16 mA 3.0 0.28 0.4 0.4 IOL = 24 mA 3.0 0.38 0.55 0.55 IOL = 32 mA 4.5 0.42 0.55 0.55 VIN = VCC or GND 0 to 5.5 0.1 1.0 A VOUT = 5.5 V 0 1 10 A VIN = VCC or GND 5.5 1 10 A Condition Positive Input Threshold Voltage Negative Input Threshold Voltage Input Hysteresis Voltage High- Level Output Voltage VIN = VIH or VIL Low- Level Output Voltage VIN = VIH or VIL IIN Input Leakage Current IOFF Power Off- Output Leakage Current ICC Quiescent Supply Current 40°C ≤ TA ≤ 85°C TA = 25°C VCC (V) http://onsemi.com 3 V V V V NL17SZ14 AC ELECTRICAL CHARACTERISTICS tR = tF = 3.0 ns Symbol tPLH tPHL Min Typ Max Min Max Unit RL = 1 M CL = 15 pF 1.65 1.8 2.5 0.2 3.3 0.3 5.0 0.5 2.0 2.0 1.0 1.0 0.5 9.1 7.6 5.0 3.7 3.1 15 12.5 9.0 6.3 5.2 2.0 2.0 1.0 1.0 0.5 15.6 13 9.5 6.5 5.5 ns RL = 500 CL = 50 pF F 3.3 0.3 5.0 0.5 1.5 0.8 4.4 3.7 7.2 5.9 1.5 0.8 7.5 6.2 Parameter Condition Propagation Delay (Figure 3 and 4) 40C TA 85C TA = 25C VCC (V) CAPACITIVE CHARACTERISTICS Symbol Parameter Condition CIN Input Capacitance VCC = 5.5 V, VI = 0 V or VCC CPD Power Dissi Dissipation ation Ca Capacitance acitance (Note 5) 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 10 MHz, VCC = 5.5 V, VI = 0 V or VCC Typical Unit 4.0 pF 25 30 pF F 5. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no-load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC. VCC A or B OUTPUT 50% GND tPLH Y RL tPHL CL INPUT 50% VCC A 1- MHz square input wave is recommended for propagation delay tests. Figure 3. Switching Waveform Figure 4. Test Circuit DEVICE ORDERING INFORMATION Device Nomenclature Logic Circuit Indicator No. of Gates per Package Temp Range Identifier NL17SZ14DFT2 NL 1 NL17SZ14XV5T2 NL 1 Device Order Number Technology Device Function Package Suffix Tape and Reel Suffix 7 SZ 14 DF 7 SZ 14 XV5 http://onsemi.com 4 Package Type Tape and Reel Size T2 SOT-353/ SC70-5/ SC-88A 178 mm, 3000 Unit T2 SOT-553 178 mm, 4000 Unit NL17SZ14 CAVITY TAPE TOP TAPE TAPE TRAILER (Connected to Reel Hub) NO COMPONENTS 160 mm MIN COMPONENTS TAPE LEADER NO COMPONENTS 400 mm MIN DIRECTION OF FEED Figure 5. Tape Ends for Finished Goods “T2” Pin One Opposing Sprocket Hole (3k Reel) Figure 6. SOT-353/SC70-5/SC-88A Reel Configuration/Orientation “T2” Pin One Opposing Sprocket Hole (4k Reel) Figure 7. SOT-553 XV5T2 Reel Configuration/Orientation http://onsemi.com 5 NL17SZ14 t MAX 1.5 mm MIN (0.06 in) A 13.0 mm 0.2 mm (0.512 in 0.008 in) 50 mm MIN (1.969 in) 20.2 mm MIN (0.795 in) FULL RADIUS G Figure 8. Reel Dimensions REEL DIMENSIONS Tape Size T and R Suffix A Max G t Max 8 mm T1, T2 178 mm (7 in) 8.4 mm, + 1.5 mm, -0.0 (0.33 in + 0.059 in, -0.00) 14.4 mm (0.56 in) DIRECTION OF FEED BARCODE LABEL POCKET Figure 9. Reel Winding Direction http://onsemi.com 6 HOLE NL17SZ14 PACKAGE DIMENSIONS SOT-353 DF SUFFIX 5-LEAD PACKAGE CASE 419A-02 ISSUE G A G 5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A−01 OBSOLETE. NEW STANDARD 419A−02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 4 -B- S 1 2 3 D 5 PL 0.2 (0.008) M B DIM A B C D G H J K N S M N J C K H ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ 1.9 mm http://onsemi.com 7 0.65 mm 0.65 mm 0.4 mm (min) 0.5 mm (min) INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC −−− 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC −−− 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 NL17SZ14 PACKAGE DIMENSIONS SOT-553 XV5 SUFFIX 5-LEAD PACKAGE CASE 463B-01 ISSUE O A -X- 5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. C K 4 1 2 B -Y- 3 D G J 5 PL 0.08 (0.003) DIM A B C D G J K S S M X Y STYLE 1: PIN 1. 2. 3. 4. 5. MILLIMETERS MIN MAX 1.50 1.70 1.10 1.30 0.50 0.60 0.17 0.27 0.50 BSC 0.08 0.18 0.10 0.30 1.50 1.70 BASE 1 EMITTER 1/2 BASE 2 COLLECTOR 2 COLLECTOR 1 INCHES MIN MAX 0.059 0.067 0.043 0.051 0.020 0.024 0.007 0.011 0.020 BSC 0.003 0.007 0.004 0.012 0.059 0.067 STYLE 2: PIN 1. 2. 3. 4. 5. CATHODE ANODE CATHODE CATHODE CATHODE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 8 NL17SZ14/D