MF2M thru MF10M / MF2S thru MF10S Miniature Glass Passivated Single-Phase Bridge Rectifiers Reverse Voltage 200 to 1000 Volts Forward Current 1.0 Ampere Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated chip junctions High surge overload rating: 40A peak Saves space on printed circuit boards Recommended for non-automotive applications Mechanical Data Case: MFxM (MBM), MFxS (MBS) Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.078 oz., 0.22 g Maximum Ratings and Electrical Characteristics (TA=25oC unless otherwise noted) Symbols MF2M MF2S MF4M MF4S Maximum repetitive peak reverse voltage VRRM 200 400 Maximum RMS voltage VRMS 140 280 200 400 600 Parameter MF6M MF6S MF8M MF8S MF10M MF10S 600 800 1000 Volts 420 560 700 Volts 800 1000 Volts Units Maximum DC blocking voltage V DC Maximum average forward output rectified current (see Fig.1) IF(AV) 1.0 Amp Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 40.0 Amps I2t 5.0 A 2 se c VF 1.1 Volt IR 5.0 100 uA Rating for fusing (t < 8.3ms) Maximum instantaneous forward voltage drop per leg at 0.4A TA = 25oC TA = 125oC Maximum DC reverse current at rated DC blocking voltage per leg RθJA RθJA RθJL Typical thermal resistance per leg Typical junction capacitance per leg (3) Operating junction and storage temperature range Notes: 85 70 20 (1) (2) CJ 13 TJ, TSTG -55 to +150 1. On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads 2. On aluminum substrate P.C.B. with an area of 0.8 x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad 3. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts 420 o C/W (1) pF o C RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) Package outline dimensions in inches (millimeters) 421