GBJ10A thru GBJ10M Glass Passivated Single-Phase Bridge Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 10.0 Amperes Features Glass passivated junction Ideal for printed circuit board Reliable low cost construction Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Surge overload rating to 200 amperes peak High case dielectric strength of 2500VRMS Mechanical Data Case: GBJ(5S) Epoxy meets UL-94V-0 Flammability rating Terminals: Leads solderable per MILSTD-750 Method 2026 High temperature soldering guaranteed: 260oC/10 seconds, 0.375 (9.5mm) lead length, 5lbs.(2.3kg) tension Weight: 0.24 ounce, 6.8 grams Mounting torque: 8.17 in. lbs. max. Typical Applications General purpose use in ac-to-dc bridge full wave rectification for Switching Power Supply, Home Appliances, Office Equipment, Industrial Automation applications Package outline dimensions in millimeters Maximum Ratings and Electrical Characteristics Rating at 25oC ambient temperature unless otherwise specified. Parameter Symbols GBJ10A GBJ10B GBJ10D GBJ10G GBJ10J GBJ10K GBJ10M Units Maximum repetitive peak reverse voltage VRRM 50 100 200 Maximum RMS voltage VRMS 35 70 140 400 600 800 1000 Volts 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts Maximum DC blocking voltage V DC Maximum average forward rectified output current (See Fig.2) IF(AV) 10.0 Amps Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200 Amps I2t 166 A 2 se c VF 1.0 Volt Rating for fusing (t<8.3ms) Maximum instantaneous forward voltage drop per leg at 5.0A TA=25oC TA=125oC IR 5.0 250.0 Typical thermal resistance per leg (Note 1) RθJC 1.5 Dielectric strength (Therminals to case, AC 1 minute) VISO 2500 TJ, TSTG -55 to +150 Maximum DC reverse current at rated DC blocking voltage per leg Operating junction and storage temperature range Notes: 1. Unit case mounted on AL plate heatsink 2. Unit mounted on P.C.B.without Heatsink 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw 468 uA o C/W Volts o C RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 469