SPICE MODELS: MURS120 MURS120 NEW PRODUCT 1.0A SURFACE MOUNT SUPER-FAST RECTIFIER Features · · · · · · Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability SMB B Surge Overload Rating to 40A Peak Ideally Suited for Automated Assembly Available in Lead Free Finish/RoHS Compliant Version (Note 5) A C Mechanical Data · · Case: SMB D Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 · · Moisture Sensitivity: Level 1 per J-STD-020C · Also Available in Lead Free Plating (Matte Tin Finish). Please see Ordering Information, Note 7, on Page 3 · · · · Marking: U1DB J H Terminals: Solder Plated Terminal - Solderable per MIL-STD-202, Method 208 G E Dim Min Max A 3.30 3.94 B 4.06 4.57 C 1.96 2.21 D 0.15 0.31 E 5.00 5.59 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm Polarity: Cathode Band or Cathode Notch Ordering Information: See Page 3 Weight: 0.093 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol MURS120 Unit VRRM VRWM VR 200 V VR(RMS) 141 V IO 1.0 2.0 A IFSM 40 A @ IF = 1.0A, TJ = 25°C @ IF = 1.0A, TJ = 150°C VFM 0.875 0.710 V @ TA = 25°C @ TA = 150°C IRM 2.0 50 mA Reverse Recovery Time (Note 3) trr 25 ns Forward Recovery Time (Note 4) tfr 25 ns Typical Junction Capacitance (Note 2) Cj 60 pF RqJT 13 K/W Tj, TSTG -65 to +175 °C Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage @ I R = 5uA RMS Reverse Voltage Average Rectified Output Current @ TT = 155°C @ TT = 145°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance, Junction to Terminal (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. Measured at 1.0MHz and applied reverse voltage of 0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. Measured with IF = 1.0A, di/dt = 100A/ms, Duty Cycle £ 2.0%. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS30179 Rev. 4 - 2 1 of 3 www.diodes.com MURS120 ã Diodes Incorporated 10.0 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE FORWARD CURRENT (A) 5 4 3 2 1 0 25 50 75 100 125 150 7.0 1750C 5.0 1000C 3.0 2.0 1.0 0 TC = 25 C 0.5 0.1 0.05 0.01 175 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) NEW PRODUCT 6 VF, INSTANTANEOUS VOLTAGE (V) Fig. 2 Typical Forward Current 60 400 200 Single Half-Sine-Wave (JEDEC Method) 80 50 TJ = 1750C 40 20 40 8.0 4.0 2.0 30 1000C 0.8 0.4 0.2 20 0.08 0 25 C 0.04 0.02 10 0.008 0 1 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 0.004 0.002 0 100 200 300 400 500 600 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Current trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS30179 Rev. 4 - 2 2 of 3 www.diodes.com MURS120 NEW PRODUCT Ordering Information Notes: (Note 6) Device Packaging Shipping MURS120-13 SMB 5000/Tape & Reel 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. 7. For Lead Free Finish/RoHS Compliant version part number, please add "-F" suffix to the part number above. Example: MURS120-13-F. Marking Information YWW XXXX DS30179 Rev. 4 - 2 XXXX = Product type marking code (See Page 1) = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 3 of 3 www.diodes.com MURS120