DIODES ES1G

SPICE MODELS: ES1A ES1B ES1C ES1D ES1G
ES1A - ES1G
1.0A SURFACE MOUNT SUPER-FAST RECTIFIER
Features
·
·
·
·
·
·
Glass Passivated Die Construction
Super-Fast Recovery Time For High Efficiency
Low Forward Voltage Drop and High Current Capability
Surge Overload Rating to 30A Peak
Ideally Suited for Automated Assembly
Lead Free Finish/RoHS Compliant (Note 5)
·
·
SMA
B
Mechanical Data
Dim
Min
Max
A
2.29
2.92
B
4.00
4.60
C
1.27
1.63
D
0.15
0.31
5.59
Case: SMA
Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
·
·
Moisture Sensitivity: Level 1 per J-STD-020C
·
·
·
·
Polarity: Cathode Band or Cathode Notch
A
C
Terminals: Lead Free Plating (Matte Tin Finish).
Solderable per MIL-STD-202, Method 208
D
J
Marking: Type Number & Date Code: See Below
Ordering Information: See Below
H
Weight: 0.064 grams (approximate)
Maximum Ratings and Electrical Characteristics
G
E
E
4.80
G
0.10
0.20
H
0.76
1.52
J
2.01
2.30
All Dimensions in mm
@ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
@ TT = 110°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
(JEDEC Method)
Forward Voltage Drop
Symbol
ES1A
ES1B
ES1C
ES1D
ES1G
Unit
VRRM
VRWM
VR
50
100
150
200
400
V
VR(RMS)
35
70
105
140
280
V
IO
1.0
A
IFSM
30
A
¾
1.25
@ IF = 0.6A
@ IF = 1.0A
VFM
@ TA = 25°C
@ TA = 100°C
IRM
5.0
200
Reverse Recovery Time (Note 1)
trr
25
Typical Total Capacitance (Note 2)
CT
10
pF
RqJT
40
°C/W
Tj, TSTG
-65 to +150
°C
Peak Reverse Current
at Rated DC Blocking Voltage
Typical Thermal Resistance, Junction to Terminal (Note 3)
Operating and Storage Temperature Range
Ordering Information
Notes:
1.
2.
3.
4.
5.
0.90
0.98
V
mA
35
ns
(Note 4)
Device*
Packaging
Shipping
ES1x-13-F
SMA
5000/Tape & Reel
Measured with I F = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
Unit mounted on PC board with 5.0 mm 2 (0.013 mm thick) copper pad as heat sink.
For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. *x = Device type, e.g. ES1A-13-F.
RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Marking Information
YWW
XXXX
DS14001 Rev. 11 - 2
1 of 3
www.diodes.com
XXXX = Product type marking code, ex. ES1A
= Manufacturers’ code marking
YWW = Date code marking
Y = Last digit of year ex: 2 for 2002
WW = Week code 01 to 52
ES1A - ES1G
ã Diodes Incorporated
IF, INSTANTANEOUS FORWARD CURRENT (A)
IO, AVERAGE RECTIFIED CURRENT (A)
1.5
1.0
0.5
0
25
50
75
100
125
150
10
ES1A - ES1D
0.1
Tj = 25° C
0.01
175
0
TT, TERMINAL TEMPERATURE (° C)
Fig. 1 Forward Current Derating Curve
IFSM, PEAK FORWARD SURGE CURRENT (A)
ES1G
1.0
0.4
0.8
1.2
1.6
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
30
100
Single Half-Sine-Wave
(JEDEC Method)
Tj = 100° C
20
10
10
1.0
Tj = 25° C
0
0.1
1
10
100
0
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Surge Current Derating Curve
40
80
120
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics
trr
+0.5A
Device
Under
Test
(-)
0A
(+)
Pulse
Generator
(Note 2)
50V DC
Approx
(-)
Oscilloscope
(Note 1)
-0.25A
(+)
-1.0A
Set time base for 50/100 ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
DS14001 Rev. 11 - 2
2 of 3
www.diodes.com
ES1A - ES1G
IMPORTANT NOTICE
Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein;
neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such
use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the
component may directly threaten life or cause injury without the express written approval of Diodes Incorporated.
DS14001 Rev. 11 - 2
3 of 3
www.diodes.com
ES1A - ES1G