ONSEMI NTHS5404

Low Profile, Small Footprint Packaging
ON Semiconductor offers the latest in low-profile, small-outline packaging.
We enable the design and production of ultra-thin end-user products for the
consumer market, by manufacturing some of the lowest profile packaging
available in the world, in vast volumes. Whether you are designing mobile
phones, MP3 players, digital still cameras, PDAs, game players, or other portable
appliances, our packaging technology allows the ON Semiconductor product
portfolio to be used in designs with the most demanding space constraints.
All of our packages are available with Pb-free leads to ensure compliance with
RoHS standards.
SOT−553, 5 LEAD
SOD–723
1.00 mm
1.40 mm
1.60 mm
0.52 mm
0.60 mm
0.28 mm
2X
0.08 (0.0032)
5
X Y
4
1.20 mm
0.20 mm
0.12 mm
0.55 mm
0.20 mm
1
2
0.20 mm
0.50 mm
BSC
0.13 mm
5 PL
0.08 (0.003)
X Y
SOT−953
SOD–923
0.80 mm
1.60 mm
3
1.00 mm
0.45 mm
0.10 mm
1.00 mm
0.40 mm
0.60 mm
0.20 mm
5
1.00 mm
0.80 mm
2X
0.08 (0.0032)
X Y
0.12 mm
0.10 mm
NOT TO SCALE
Page 4
1 2
0.35 mm
BSC
3
0.15 mm
5X
0.08 X Y
0.10 mm
Portable Solutions
A Multitude of Solutions for Today’s Portable Electronics
ON Semiconductor
Page 1 SHD
2 SYN
L
15 MH
COUT
10 MF
3 VO
4 LX
NCP1500
High Efficiency DC-DC Converters
CB0
8
CB1
7
GND
6
VIN
5
VIN
CIN
10 MF
MBRM120
VIN
1 VIN
CIN
2 GND
OFF ON
3 EN
NCP1521
Typical Buck Converter
LX 5
L
VOUT
COUT
100
R1
Cff
FB 4
90
R2
Eff (%)
Typical Step-Down Converter
Key Features
•PWM buck converter operates either as an LDO or in PFM mode when output current
decreases (NCP1500/01/19/21/22/23/29), maximizing efficiency at both light and
full loads
•High switching frequencies allow use of smaller output filters, capacitors, and inductors,
while maintaining high efficiency
80
70
Vout = 3.3 V
Vin = 4.2 V
TA = 25oC
60
50
0
100
200
300
Iout (mA)
400
500
600
NCP1521 - Efficiency vs Output Current
Buck Converters
Package(s)
Topology
Frequency
Input
Voltage
Output Voltage
Max
Current
Typical
Efficiency
Features
NCP1500
Micro8™
PWM/Linear
External Sync
270-630 kHz
2.7 - 5.4 V
1.0 - 1.8 V Selectable
300 mA
91%
Turns into LDO Mode when Sync is Absent
NCP1501
Micro8
PWM/Linear
External Sync
450-1000 kHz
2.5 - 5.2 V
1.0 - 1.8 V Selectable
300 mA
92%
Sync Rec, Turns into LDO Mode when Sync is
Absent
NCP1510A
MicroBump-9
PWM/Pulse
1 MHz or External Sync
450-1000 kHz
2.7 - 5.2 V
1.0 - 1.8 V Selectable
300 mA
95%
Sync Rec, Turns into Pulse Mode to Save Power
when Sync Pin is Low
NCP1519*
Thin SOT-23-5
PWM/PFM
1.7 Mhz
2.7 - 5.5 V
Adj 0.9 - 3.3 V by External
Resistors, 1.2, 1.5, 1.8 V
400 mA
96%
Sync Rec, Ultra-Low 60 mA Iq at Light Loads
NCP1521
Thin SOT-23-5,
Thin DFN-6
PWM/PFM
1.5 Mhz
2.7 - 5.5 V
Adjustable 0.9 - 3.3 V
by External Resistors
600 mA
96%
Sync Rec, Ultra-Low 30 mA Iq at Light Loads
NCP1522
Thin SOT-23-5
PWM/PFM
3 MHz
2.7 - 5.5 V
Adjustable 0.9 - 3.3 V
by External Resistors
600 mA
93%
Sync Rec, Ultra-Low 60 mA Iq at Light Loads
NCP1523*
MicroBump-8
PWM/PFM
3 MHz
2.7 - 5.5 V
Adjustable 0.9 - 3.3 V
by External Resistors
600 mA
93%
Sync Rec, Ultra-Low 60 mA Iq at Light Loads
NCP1526
Thin DFN-10
Dual Output
PWM + LDO
3 MHz
2.7 - 5.5 V
PWM 1.2 V; LDO 2.8 V
Other Options Available
PWM 400 mA
LDO 150 mA
95%
Sync Rec, Ultra-Thin DFN: 0.55 mm Thickness
NCP1529*
Thin SOT-23-5
PWM/PFM
1.7 Mhz
2.7 - 5.5 V
Adj 0.9 - 3.3 V by External
Resistors, 1.2, 1.5, 1.8 V
1A
96%
Sync Rec, Ultra-Low 60 mA Iq at Light Loads
NCP1530
Micro8
PWM/PFM
600 kHz or External Sync
Up to 1200 kHz
2.7 - 5.5 V
2.5 - 5.0 V
600 mA
92%
Programmable Soft-Start
NCP1550
SOT-23-5
PWM/PFM
600 kHz
2.5 - 6.0 V
1.8 - 3.3 V
2000 mA
(Ext Switch)
90%
Enable Pin
Device
* Planned 2H06
Page Portable Solutions
High Efficiency DC-DC Converters
L1
CE
1
OUT
2
NC
3
Key Features
•High switching frequency allows use of
small inductors and capacitors
22 MH
NCP1400A
Vin
C1
10 MF
D1
Vout
C2
68 MF
LX
5
Feature
NCP1410
Competitor
Output Voltage Range
1.5 ~ 5.5 V
2.0 ~ 5.5 V
Operation Startup Voltage
1.0 ~ 5.5 V
1.1 ~ 5.5 V
Max Switching Frequency
600 kHz
500 kHz
Inductor
Output Ripple Voltage
15 to 22 mH
22 mH
34 mA Typ
Not Specified
92% Typ
91% Typ
Efficiency
GND
4
Operating Current @ IOUT = 0
Shutdown Current
Typical Boost Converter
Reference Voltage Accuracy
9 mA Typ
16 mA Typ
0.05 mA Typ
0.1 mA Typ
1.19 V ± 0.6%
1.3 V ± 2.0%
Boost Converters
Device
Package(s)
Topology
Frequency
Input Voltage
Output Voltage
Max Current
Typ Efficiency
Features
NCP1400A
SOT-23-5
PWM
180 kHz
0.8 - 5.5 V
NCP1402
SOT-23-5
PFM
180 kHz
0.8 - 5.5 V
1.8 - 5.0 V
100 mA
88%
Enable Pin
1.8 - 5.0 V
200 mA
85%
Enable Pin
NCP1403
SOT-23-6
PFM
300 kHz
NCP1406
SOT-23-5
PFM
1000 kHz
1.2 - 5.5 V
Up to 15 V
50 mA
82%
Enable Pin
1.2 - 5.5 V
Up to 25 V
50 mA
85%
Enable Pin
NCP1410
Micro8™
PFM
NCP1421
Micro8
PFM
600 kHz
1.0 - 5.5 V
1.5 - 5.5 V
250 mA
92%
Sync Rec, Low Battery Detection
1200 kHz
1.0 - 5.0 V
1.5 - 5.0 V
600 mA
94%
True Cutoff, Ring-Killer, Low Battery Detection
NCP1422
DFN-10
PFM
1.2 MHz
1.0 - 5.0 V
1.0 - 5.0 V
800 mA
94%
Sync Rec, True Cutoff, Low Battery Detection
NCP1423
Micro10
PFM
600 kHz
0.8 - 3.3 V
1.8 - 3.3 V
400 mA
92%
Sync Rec, True Cutoff, Low Battery Detection,
Low Startup Voltage (0.8 V)
NCP1450A
SOT-23-5
PWM
180 kHz
0.8 - 5.5 V
1.8 - 5.0 V
1000 mA
(Ext Switch)
88%
Enable Pin
Optimize Figure-of-Merit with MOSFETs for DC-DC Conversion
Complete mCool™ Portfolio
•N-Channel & P-Channel
•Single, Dual, Complementary and
FETKY®
•8 V, 20 V, 30 V
Key Performance Characteristics
•Low Rds(on) and Gate Charge Deliver
Low Figure-of-Merit Ratio
(<110 for Single N-Channel)
•Package Thermal Resistance of
38°C/W
•Package Footprints as Small as
4 mm2
•Low Profile <0.75 mm
mCool™ MOSFETs
Device
SYNCHRONOUS BOOST
ASYNCHRONOUS BOOST
Polarity
Configuration
RDS(ON)*
Package
NTJD4116N
30 V
N
Dual
<70 m W
WDFN, 2 x 2 mm
NTLJF4156N
30 V
N
FETKY
<70 m W
WDFN, 2 x 2 mm
NTLJF3117P
20 V
P
FETKY
<100 m W
WDFN, 2 x 2 mm
NTLJD3119C
20 V
N/P
Complementary
<70/100 m W
WDFN, 2 x 2 mm
Other New MOSFETs
Device
SYNCHRONOUS BUCK
ASYNCHRONOUS BUCK
ON Semiconductor
BVDSS
BVDSS
Polarity
Configuration
RDS(ON)*
Package
NTHD3102C
20 V
N/P
Complementary
<45/85 m W
ChipFET™, 2 x 3 mm
NTGS3441P
20 V
P
Single
<110 m W
TSOP-6, 3 x 3 mm
NTGD3122C
20 V
N/P
Complementary
<80/145 m W
TSOP-6, 3 x 3 mm
NTGF3123F
20 V
P
FETKY
<80 m W
TSOP-6, 3 x 3 mm
NTJS4160N
30 V
N
Single
<85 m W
SC-88, 2 x 2 mm
* RDS(ON) 4.5 Vgs
Page Smaller, Thinner, Faster, Cooler & Safer Load Switch Elements
Thermal Image of mCool™ NTLJS3113P
(Power FET)
Thermal Resistance Comparison of Different Packages
Minimum Pad, I (load) = 4 A, Steady State
Test Conditions: FR4, 1-in-2, 1 oz Cu, Dual Die
Power MOSFETs
High Load Current >4 A
Low to Medium Load Current <4 A
Device
BVDSS
Polarity
Configuration
RDS(ON) 4.5 Vgs
Package
Dimensions
NTLTS3107P
NTHS5404
20 V
P
20 V
N
Single
< 16 mΩ
Micro-8 LL
3.3 x 3.3 mm
Single
< 30 mΩ
ChipFET
3 x 2 mm
NTLJS4159N
30 V
NTLJD4114N
30 V
N
Single
< 35 mΩ
WDFN
2 x 2 mm
N
Dual
< 70 mΩ
WDFN
3.3 x 3.3 mm
NTZD3151P
NTK3142P
20 V
P
Single
< 150 mΩ
SOT-563
1.6 x 1.6 mm
20 V
P
Single
<4Ω
SOT-723
1.2 x 1.2 mm
Description
Package
Dimensions
NTGD1100L
N-Channel Level Shift, 8 V P-Channel Switch < 80 mΩ
TSOP-6
3 x 3 mm
NTJD1155L
N-Channel Level Shift, 8 V P-Channel Switch < 175 mΩ
SC-88
2 x 2 mm
NTLJD2105L
N-Channel Level Shift, 8 V P-Channel Switch < 50 mΩ
WDFN
2 x2 mm
Device
Description
Package
Dimensions
Device
Integrated Load Switches
Low VCE(sat) BJTs
Low to Medium Load Current <4 A
High Load Current >4 A
Integrated Load Switches
Page NSS35200CF8T1G
35 V, 2 A DC, 7 A Peak
ChipFET
2 x 3 mm
NSS40400CF8T1G
40 V, 4 A DC, 7 A Peak
ChipFET
2 x 3 mm
NSS30201MR6T1G
30 V, NPN, 2 A DC, 3 A Peak
TSOP-6
2 x 3 mm
NSS40600CF8T1G
40 V, PNP, 6 A DC, 7 A Peak
ChipFET
2 x 3 mm
NSS40601CF8T1G
40 V, NPN, 6 A DC, 7 A Peak
ChipFET
2 x 3 mm
NSS12500UW3T2G
12 V, PNP, 5 A DC, 7 A Peak
WDFN-3
2 x 2 mm
Device
Description
Package
Dimensions
EMF5XV6T5
12 V, PNP with NPN BRT Driver
SOT-563
1.6 x 1.6 mm
Portable Solutions
Smaller, Thinner, Faster, Cooler & Safer Charging Switch Elements
Charging Switches
Package
Device Type
WDFN 2x2 mm
SOT-23/TSOP-6
ChipFET
NTLJS3113P
NTGS3443P
NTHS4101P, NTHS5441
NSS12500UW3T1G
NSS30100LT1G
NSS35200CF8T1G
FET Single
Low VCE(sat) BJT
Key Features
•Thermal Performance >1.5 W
•Package Footprints as Small as 4 mm2
•Low Profile <0.8 mm
FET + Schottky
NTLJF3117P
NTGF3123P
NTHD3101F, NTHD4P02F
FET Dual
NTLJD3115P
NTGD4161P
NTHD4102P, NTHD4401P
Charging Switch
Single FET
BJT
RSNS
VIN
LED
FET +
Schottky
Dual FET
CFLG
+ MC
Cin
CMP
ISNS
PMU0
VCC
VSNS
ISEL
+
Cout
RISEL
+
GND
Typical Switch Elements
Typical Charging Switch Circuit
Rectifiers Manage Big Power in Small Packages
Device
VRRM
Vf
Current
Package
MBRM110E
10 V
0.46 V
1A
POWERMITE®
MBRM120E
20 V
0.46 V
1A
POWERMITE
MBRM130L
30 V
0.33 V
1A
POWERMITE
MBRM140
40 V
0.52 V
1A
POWERMITE
MBR0520L
20 V
0.33 V
0.5 A
SOD-123
MBR0530
30 V
0.43 V
0.5 A
SOD-123
MBR0540
40 V
0.46 V
0.5 A
SOD-123
MBR130
30 V
0.47 V
1A
SOD-123
iF, INSTANTANEOUS FORWARD
CURRENT (AMPS)
10
Schottky Rectifiers
TJ = 150°C
TJ = 125°C
TJ = 85°C
TJ = 25°C
TJ = -40°C
1.0
0.1
0
0.1
0.2
0.3
0.4
0.6
0.5
vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
MBRM130L Typical Forward Voltage
ON Semiconductor
Page Low Standby Current Battery Management for Extended Battery Life
CFLG
EN
IBDRN, BATTERY DRAIN CURRENT ( A)
Vin
Microprocessor
FAULT
Vin
VCC
4.7 F
Cin
NCP1835
V2P8
VSNS
BAT
ISEL TIMER
15 nF
CT
80 k
RISEL
GND
GND
0.1 F
C2p8
4.7 F
Cout
0.48
VCC = 0
0.44
0.40
0.36
0.32
0.28
0.24
0.2
2.5
2.7
2.9
3. 1
3.3
3.5
3.7
3.9
4.1
VSNS, BATTERY VOLTAGE (V)
Typical Application Circuit
Battery Drain Current versus Battery Voltage
Battery Management Circuits
Device
Description
Package
Key Features
NCP1835
Up to 1 A Single-Cell Lithium-ion/Polymer Integrated CCCV Battery Charger
DFN-10
No External MOSFET
NCP1835B
Up to 300 mA Single-Cell Lithium-ion/Polymer Integrated CCCV Battery Charger
DFN-10
No External MOSFET
NCP1800
Single-Cell Lithium-ion CCCV Battery Charger
Micro8™
Industry Leading Standby Current 0.5 μA, Adjustable Charge Current Limit
Nickel Chemistry Battery Cradle Charger
SOIC-8
Peak Voltage Detection
MC33340/2
Integrated Overvoltage Protection for Battery and Charging Circuits
P−CH
AC/DC Adapter or
Accessory Charger
Schottky
Diode
VCC
IN
Undervoltage
Lock Out
+
−
Logic
+
FET
Driver
C1 LOAD
OUT
Vref
GND
CNTRL
Microprocessor port
Typical OVP Device Diagram
Battery Protection Circuits
Overvoltage Protection
Package
UVLO (V)
OVP (V)
NUS2045
2.8
6.85
Yes
20
71
DFN
3.3 x 3.3
0.85
-40 to +85
NUS3045
2.8
6.85
Yes
30
66
DFN
3.3 x 3.3
0.85
-40 to +85
NUS3046
5.5
Yes
30
66
DFN
3.3 x 3.3
0.85
-40 to +85
NUS1204
4.7
No
12
75
TDFN
2.0 x 2.0
0.85
-40 to +85
6.85
Yes
30
66
TLLGA
2.5 x 3.0
0.55
-40 to +85
4.45
Yes
30
66
TLLGA
2.5 x 3.0
0.55
-40 to +85
6.85
Yes
NA
NA
SOT-23-5
3.0 x 2.75
1.00
-40 to +85
4.4, 5.5
Yes
NA
NA
SOT-23-5
3.0 x 2.75
1.00
-40 to +85
Device
NUS3055
2.8
NUS3035
NCP345
NCP346
Page MOSFET
Logic
Overide
2.6
Vds (V)
Rdson max
(mW) @ 4.5 V
Type
Area (mm)
Height
(mm)
Ambient Operating
Temperature (°C)
Portable Solutions
Optimize Efficiency and Space with Inductive and Charge Pump LED Drivers
16
C4
1
GND
4.7 MF/10 V
FB
Vout
D6
D5
D4
D3
CHARGE PUMP
DC−DC CONVERTER
2
DIGITAL CONTROL
LWT67C
LWT67C
D2
LWT67C
GND
LWY87S
LWY87S
LWY87S
Vbat
8
Q2
R1
GND
3
100 k
ANALOG CONTROL
4
22 7
LWT67C
Vout
Q1
AGND
GND
12
C2
1.0 MF
MBR0530
R1
1 MF/10 V
OVERVOLTAGE
EN
D1
1
C5
10
D4
3
11
GND
L1
22 MH
GND
13
D1
2
GND
14
Vbat
D3
5
15
GND
C1
4.7 MF
LWY87S
Vbat
C1
220 nF
D2
EN
C2
220 nF
LWT67C
CURRENT CONTROL
4
Pulse
NCP5005
C3
220 nF
7
Q3
6
Q4
5
OVERTEMPERATURE
Inductive Solution — NCP5005
9
PGND
Charge Pump Solution — NCP5604A
Application
LED Type
Number of LEDs/
Connection
Topology
Product
Key Feature
2 LEDs/Parallel
Linear
NUD4301: Adjustable (1-30 mA) constant current
driver; DFN-8 (2 x 2 mm)
2 - 5 LEDs/Series
Inductive
NCP5006/5007: Up to 92% efficiency PFM boost,
21 V/ 1 W output; thin SOT-23-5 (3 x 3 mm)
Simple, open LED output clamp
3 - 5 LEDs/Series
Inductive
NCP5005: Enhanced version of NCP5006 - high EMI
immunity
Enhanced EMI immunity, best for RF
sensitive application
2 - 5 LEDs/Series
Inductive
NCP5010: 1 MHz PWM boost, 22 V/0.5 W output, integrated rectifier & true-cutoff; uBump-8 (1.7 x 1.7 mm)
Highly integrated driver
2 LEDs/Parallel
Charge Pump
NCP5602: 90% peak efficiency, 2 outputs (25 mA
each), 2% current matching, I2C; LLGA-12 (2 x 2 mm)
ICON mode; I2C dimming control
2 LEDs/Parallel
Charge Pump
NCP5612: 2 outputs (25 mA each), I2C; LLGA-12
(2 x 2 mm)
ICON mode; S-Wire link dimming control
2 - 6 LEDs/Series
Inductive
NCP1406: Up to 90% efficiency, PFM (up to 1 MHz),
25 V/0.5 W output; thin SOT-23-5 (3 x 3 mm)
Can operate from 1 or 2 alkaline or
Ni-based cells
3 or 4 LEDs/Parallel
Charge Pump
NCP5604A/B: Consistent 90% efficiency, 3 or 4
outputs (25 mA each), 0.5% current matching;
TQFN-16 (3 x 3 x 0.8 mm)
NCP5604A: Drives 4 LEDs
NCP5064B: Drives 3 LEDs
Low current - up to 50 mA for
1 cell/100 mA for 2 cell
Single LED
Inductive
NCP1400ASN50: Fixed frequency PWM micropower
boost converter; thin SOT-23-5 (3 x 3 mm)
Can operate from 1 or 2 alkaline or
Ni-based cells
Medium current/Multi-die
WLED, 100-350 mA
Single
(or multiple in parallel)
Charge Pump
NCP5603: 200 mA cont/350 mA pulsed, voltage regulated output, 4.5 V or 5 V, 75% eff; DFN-10 (3 x 3 mm)
High-current single output charge pump
Medium current up to 50 mA
for 2 cell and 100 mA for 3 cell
2 - 6 LEDs/Series
Inductive
NCP1406: Up to 90% efficiency, PFM (up to 1 MHz),
25 V/0.5 W output; thin SOT-23-5 (3 x 3 mm)
Simple, low cost
High current WLED, up to
600 mA
Single
(or multiple in parallel)
Inductive
NCP1421: PFM boost (up to 1.2 MHz), sync rec, output
up to 5 V, 600 mA cont, 94% eff, true-cutoff, 50 nA
shutdown current; Micro8 (3 x 5 mm)
Synchronous rectification
High current WLED, up to
800 mA
Single
(or multiple in parallel)
Inductive
NCP1422: PFM boost (up to 1.2 MHz), sync rec, output
up to 5 V, 800 mA cont, 94% eff, true-cutoff, 50 nA
shutdown current; DFN-10 (3 x 3 mm)
Synchronous rectification
High current WLED, up to 1 A
2 - 5 LEDs/Series
Inductive
NCP5050: 23 V/4.5 W output, PWM, 1.7 MHz; DFN-10
Integrated switch for 2 adjustable output
current levels
LED (10 - 25 mA),
Flash LED (100 - 400 mA)
4 LEDs + Flash LED
Charge Pump
NCP5608: Consistent 90% efficiency, 8 outputs (4 @
25 mA each + 4 @ 100 mA each), 0.5% current
matching; TQFN-24 (4 x 4 mm)
One chip lighting solution
—
—
Inductive
NCP1406: Up to 90% efficiency, PFM (up to 1 MHz),
25 V/0.5 W output; thin SOT-23-5 (3 x 3 mm)
Can operate from 1 or 2 alkaline or
Ni-based cells
Display
Backlighting
Standard, 10-25 mA
Flash (Torch)
Single Driver
for Backlight &
Flash
OLED Driver
Supply
Linear or PWM dimming
BOLD denotes new or pending device.
ON Semiconductor
Page Baseband
EMI Filtering with ESD Protection for LCD and Camera Interfaces
Camera
Module
CLK
Hsync
PCB Connector
Vsync
Base
Band
Chip
Key Features
•Excellent low-pass filter characteristics from 800 MHz to 5 GHz
•Low profile package for slim portable electronics
•0.4 mm pin pitch provides improved layout options
EMI Filtering Devices
Device
# Lines
Package
Capacitance
(pF) @ 2.5 V/Diode
Attenuation
@ 900 mHz to 5.0 Ghz
NUF4402MN
4
DFN 8
12
> -28 dB
NUF4403MN
4
DFN 8
17
> -35 dB
NUF4210MN
4
DFN 8
8.5
> -19 dB
NUF4001MU
4
uDFN 8*
12
> -30 dB
NUF6401MN
6
DFN 12
17
> -35dB
NUF6406MN
6
DFN 12
13
> -28dB
NUF6402MN
4+4
DFN 12
17
> -35dB
NUF6001MU
6
uDFN 12*
17
> -35dB
NUF8401MN
8
DFN 16
13
> -28 dB
NUF8402MN
8
DFN 16
17
> -35 dB
NUF8410MN
8
DFN 16
8.5
> -19 dB
NUF8001MU
8
uDFN 16*
13
> -28 dB
NZF220D
2
SC-88
6
> -20 dB
NUF2030XV6
2
SOT-563
16
> -20 dB
NUF2042XV6
2
SOT-563
21
> -20 dB
NUF2220XV6
2
SOT-563
7
> -18 dB
NUF2230XV6
2
SOT-563
16
> -23 dB
NZF220T
1
SC-70
7
> -20 dB
Comments
Low parasitic inductance package design
Low parasitic inductance package design
—
—
* Low profile package with 0.4 mm pin pitch
Page 10
Portable Solutions
Transient Voltage Protection Devices for I/O
IEC61000-4-2 Contact Positive Pulse
IEC61000-4-2 Contact Negative Pulse
TVS Protection Devices
Surge Rating
8 x 20 μs
ESD Rating
IEC61000-4-2
Contact
Description
Package
Dimensions
(mm) L x W x H
TVS and ESD Protection Diode
SOD-923
1.0 x 0.6 x 0.4
Up to 140 W
30 kV
µESDxxS Series
TVS and ESD Protection Diode
SOD-723
1.4 x 0.6 x 0.5
Up to 128 W
30 kV
µESDxxD Series
Dual TVS and ESD Protection Diode
SOT-723
1.2 x 1.2 x 0.5
—
22 kV
Device
ESD9X Series
ESD5B Series
Bi-directional TVS and ESD Protection Diode
SOD-523
1.6 x 0.8 x 0.6
—
30 kV
ESD5Z Series
TVS and ESD Protection Diode
SOD-523
1.6 x 0.8 x 0.6
Up to 240 W
30 kV
NZL Series
Dual TVS and ESD Protection Diode
SC-89
1.6 x 1.6 x 0.7
—
22 kV
SM05 Series
Dual ESD Protection Diode
SOT-23
2.9 x 2.4 x 1.0
Up to 300 W
15 kV
NZQA Series
Quad TVS Array
SOT-553
1.6 x 1.6 x 0.55
Up to 100 W
9 kV
NUP45V6 Series
Quad TVS Array
SOT-953
1.0 x 1.0 x 0.45
—
8 kV
NUP5120 Series
NUP2202/4202 Series
NUP8010 Series
ON Semiconductor
Penta TVS Array
SOT-563
1.6 x 1.6 x 0.55
Up to 90 W
8 kV
Single and Dual Port USB 2.0
SC-88
2.0 x 2.1 x 1.0
Up to 500 W
20 kV
Eight Line TVS Array
DFN-8
1.6 x 1.6 x 1.0
Up to 20 W
8 kV
Page 11
Audio Filters – LC Network EMI Filters with ESD Protection
0
C1 L C2
-10
Gain (dB)
-20
Discrete
Implementation
-30
C1 L C2
Integrated Filter
Response
-40
L
Figure 1
Cd Cd
-50
L
-60
Cd Cd
-70
1.E+05
1.E+06
1.E+07
1.E+08
Frequency (Hz)
1.E+09
Key Features
•ESD protection exceeds 15 kV (IEC61000-4-2)
•Integrated Inductors ranges 2.7 - 5.0 nH
•Low Series Resistance of 0.28 - 4.0 Ohms
•Excellent S21 curves characteristics
•Steady state current of greater than 500 mA/line
•Peak Current 1.2 A
Figure 2
1.E+10
EMI Audio Filters
Lines
Resistance (W)
Inductance (nH)
Package
Circuit Diagram
NUF2441FCT1G
Device
2
0.27
3
Flip-Chip
Figure 1
NUF2450MUT1G
2
1.5
2.5
uDFN (1.2 x 1.8 mm)
Figure 2
NUF2070MNT1G
2
2.5
4.5
DFN (2.0 x 2.0 mm)
Figure 1
NUF2114MNT1G
2
10
—
DFN (2.0 x 2.0 mm)
—
NUF2116MNT1G
2
68
—
DFN (2.0 x 2.0 mm)
—
NUF4220MNT1G
4
1.2
5
DFN (2.0 x 2.0 mm)
Below
EMI Filter and ESD Protection for Stereo Headset Jacks
Shrinks by 50% for MP3/Cellphone Applications
NUF4220
L
R Audio Input
C1
C2
L
L Audio Input
C1
C2
L
Microphone Line
C1
C2
•Flow through pinout for easy PCB layout
L
Microphone Line
C1
Key Performance Characteristics
•> 35 dB of RF Attenuation from 900-3000 MHz
•Compliant with IEC61000-4-2 (Level 4) – 15 kV Air
and Contact
•Extremely low loss signal path in Audio Band
•2 x 2 mm DFN Package
C2
NUF4220 Stereo Headset Filter Solution
Page 12
Portable Solutions
NCP2820 Filter-Free Class D Audio Amp Improves System Efficiency
and Eliminates PCB Hot Spots in Audio Subsystems
100
100
90
90
EFFICIENCY (%)
DIE TEMPERATURE (oC)
NCP2820
80
70
60
50
40
Class AB
30
Vp = 5 V
RL = 8
20
10
0
0
0.5
Pout (W)
80
Class AB
70
Vp = 5 V
RL = 8
60
50
40
30
20
1.0
NCP2820
0
0.2
Extend Battery Life over with 2X Efficiency
Improvement at 0.5 W Output Power
0.4
0.6
0.8
Pout (W)
1.0
1.2
1.4
Keep Cool Across All Power Ranges
Key Performance Characteristics
•Wide Supply Range of 2.2 – 5.5 V
n Superior >65 dB PSRR allows direct connection to the Battery
n 1 W to 8 W (BTL) Bridge Tied Load or 2.65 W to 4 W BTL @ 5 V
•Thermal overload protection circuitry
•“Pop and click” noise protection circuit
Low Voltage Audio Amplifier Selector Guide
Audio Output/
Application
Mono Speaker —
Basic Telephone Operation &
Ployphonic Ringtones
Stereo Headphones —
MP3 Players, Bluetooth
Headsets
Mono Speaker/Earpiece —
Low Cost Integrated Solution
Class
Topology/
Features
Output
Power
PSSR
@ 217 Hz
Efficiency
THD+N
Turn-On
Time (Typ)
Iq
(Typ)
Shut-Down
Current (Typ)
Package(s)
Device
AB
BTL
1 W+
-73 dB
63%
0.02%
285 ms
1.5 mA
10 nA
Micro8™
Microbump-9
NCP2890
AB
BTL
1 W+
-73 dB
63%
0.02%
100 ms
1.5 mA
10 nA
Microbump-9
NCP2892A
NCP4894
AB
Differential
1 W+
-80 dB
64%
0.006%
140 ms
1.9 mA
20 nA
Microbump-9
DFN-10
AB
Virtual Ground
No Output Cap
135 mW/Ch
-82 dB
63%
0.003%
285 ms
1.54 mA
10 nA
Micro10
NCP2809
AB
Differential
150 mW/Ch
-80 dB
64%
0.006%
140 ms
1.9 mA
20 nA
Microbump-9
DFN-10
NCP4894
AB
Single End/
Differential
1 W to
Speaker;
250 mW to
Earpiece
-70 dB
64%
SE 0.003%,
BTL 0.01%
140 ms
1.7 mA
20 nA
Microbump-9
NCP4896
D
Filterless,
Gain Select by
Resistors
2.65 W
-65 dB
90%
0.05%
9 ms
2.2 mA
300 nA
Microbump-9
DFN-8
NCP2820
D
Filterless,
Integrated Ext
Selectable Gain
6 or 12dB
2.65 W
-65 dB
90%
0.05%
9 ms
2.5 mA
500 nA
Microbump-9
NCP2821
D
Filterless, Gain
Selection by
Resistor
2 W+
per Channel
-65 dB
90%
0.05%
9 ms
4.4 mA
600 nA
Microbump-9
2x NCP2820
or NCP2821
Mono Speaker —
Handsfree Speaker Phone
Stereo Speakers —
Offer Stereo Sound Quality
to Play Video/Music-onDemand, MP3
ON Semiconductor
Page 13
Complete Audio Amplifier Solution for Driving Speakerphone
and Earpiece in a 2.1 mm 2 Chipscale Package
ON
OFF
NCP4896 Class AB Audio Amplifier
Key Performance Characteristics
•Wide Supply Range of 2.2 – 5.5 V
•Superior >70 dB PSRR allows direct connection to the battery
•THD+N:
n 0.003%-0.01% (40 mW Pout)
n 0.02% (400 mW)
•1 W to 8 W (BTL) Bridge Tied Load @ 5 V
•90 mW to 32 W single ended load @ 5 V
•Thermal overload protection circuitry
•“Pop and click” noise protection circuit
NCP4896
Demo Board
Available
Low Voltage, Low Power Comparators
VCC
Headphones + Mic
> 1 k7
Hook Switch Detection
L
R
VCC
L R
NCS2220A
Detect
Hook
Switch
Mirophone and
Headphone Detection
Handsfree Head Set
Hook Switch
Vref
Vref
Mic
Key Performance Characteristics
•Higher Detection Accuracy/Reliability
•Additional ESD Protection
•OK with DC and Audio Signals
•Internal Hysteresis
•Ultra Small Packaging
ON/OFF
CELL PHONE
Comparators
Device
VRRM
Package(s)
NCS2200
Series
Single Low
Voltage Comparator
SC-70, SOT-23, QFN 2 x 2.2,
uDFN 1.2 x 1.0
NCS2200A
Dual Low
Voltage Comparator
uDFN 1.6 x 1.6
Typical Detection Circuit
Page 14
Portable Solutions
Biased Audio for the Highest Output Power from a
Single-Cell Lithium-Ion Battery
2.5
47
87
2.0
NCP5603
1.0 MF
POUT (W)
CF1+
VIN
1.5
10 MF
CF1+
EN
470 nF
CF1+
ON
FSEL
OFF
1.0
Vout = 4.5 or 5.0 V
CF2+
200 mA
470 nF
VSEL CF2GND
NCP2820
0.5
0.0
2.5
3.0
3.5
VCC (V)
4.0
4.5
5.0
DC-DC Converters
NCP2820 Output Power
versus Supply for THD+N <1%
To maximize the power output of a linear audio amplifier in
portable applications, it is necessary to bias the amp at a
fixed voltage instead of operating directly from the battery.
Device
Architecture
Current Capability
(Vout = 5 V, Vin = 3.6 V)
Efficiency @ Current Load
(Vout = 5 V, Vin = 3.6 V)
Package
NCP5603
Charge Pump
160 mA
75%
DFN-10, 3 x 3 mm
NCP1421
Inductive
500 mA
87%
Micro10, 3 x 5 mm
NCP1422
Inductive
700 mA
88%
DFN-10, 3 x 3 mm
Stereo Switching with SPDT Audio Switches
NLAS5123B
Two DFN-6 Packages
Requiring 2.4 mm2 of Board Space
Lin1
Voice/MP3
Decoder
NLAS5223B
Single WQFN-10 Packages
Requiring 2.52 mm2 of Board Space
Voice/MP3
Decoder
Lout
Lin2
Lin1
Lout
Lin2
Rin1
Rout
Rin2
Rin1
FM
Tuner
FM
Tuner
Rout
Rin2
Selection
Control
0.75 mm
Selection
Control
1.40 mm
0.75 mm
3
1.20 mm
1
3
6
4
1.20 mm
1
3
6
4
1.00 mm
ON Semiconductor
One WQFN-10
Package
0.75 mm
Two DFN-6
Packages
1.00 mm
Key Performance Characteristics
•Excellent Audio Fidelity - Very Low THD,
0.011% Typical
•Wide 1.65 to 5.5 V Power Supply Range
•Extended Temperature Capable
•Low RDS(on) , Tight Channel Matching
5
6
1
1.80 mm
10
Page 15
Low Capacitance Analog Switches for Data Switching
NLAS4717 Dual SPDT
Microbump-10 Using
Only 3 mm2
USB
Transceiver
Selection
Control
ESD/EMI
Filter
Connector
Selection
Control
UART
3 mm
1.96 mm
NLAS4717EP Dual SPDT
•USB 2.0 Full Speed Compliant
•<30 pF On Capacitance
•NLAS7222MTR2G Dual SPDT
•USB 2.0 High Speed Compliant
•<7 pF On Capacitance
1.46 mm
PIN ONE
CORNER
4.95 mm
PIN 1 ID
Key Performance Characteristics
•Wide 1.8 - 5.5 V Power Supply Range
•Low RDSon, 4.5 W @ 3.0 V
•Matching Between the Switches ±0.5 W
0.65 mm
Microbump-10
1 mm
Micro10
Ensure Low Drain Current with Voltage Supervisory Devices
Voltage
Detection
Supervisory Devices
Reset
MP
Generator Supervisor
NCP300/301
NCP302/303
NCP304/305
Under
Voltage
Sensing
MAX809/810
NCP803
Under
Voltage
Sensing
Reset
Time-Out
Counter
Under
Voltage
Sensing
Reset
Time-Out
Counter
MAX708
Power
Fail
Comparator
Manual
Reset
Key Performance Characteristics
•Lowest quiescent current for extended battery life
•Complete range of products
•Large number of voltage thresholds
•Wide operating voltage range up tp 10 V
Page 16
Device
Function
Pertinent Features
Package
NCP300
Volt Detector
Complementary Output, No External Delay
SOT-23-5
NCP301
Volt Detector
Open Drain Output, No External Delay
SOT-23-5
NCP302
Volt Detector
Complementary Output, Programmable External Delay
SOT-23-5
NCP303
Volt Detector
Open Drain Output, Programmable External Delay
SOT-23-5
NCP304
Volt Detector
Complementary Output, No External Delay
SC-82AB
NCP305
Volt Detector
Open Drain Output, No External Delay
SC-82AB
MAX809
Reset Generator
140 mS, Minimum Output Reset-Low Delay
SOT-23
SOT-23
MAX810
Reset Generator
140 mS, Minimum Output Reset-High Delay
MAX803
Reset Generator
140 mS, Minimum Output Drain Output Reset-Low Delay
SOT-23
MAX708
mP Reset Mo
200 mS Push-Pull Output Reset Delay, Std Threshold
SO-8, Micro8™
Portable Solutions
Achieve Lower EMI with Spread-Spectrum Clock Synthesizers
EMI Clock Synthesizers
Device
fin
(MHz)
Accepts
Crystal
Input
Accepts
Spread
Modulation
Reference Power
Spectrum
Rate
Input
Down Enable/Disable Equation
Output
Frequency
Deviation
Reference
Output
NB2669A
6 - 13
N
Y
Y
N
fin ÷ 256
±1%
N
NB2760A
6 - 13
Y
Y
Y
N
fin ÷ 256
±0.75%
N
NB2762A
6 - 13
Y
Y
Y
N
fin ÷ 256
-1.25%
N
NB2769A
6 - 13
Y
Y
Y
N
fin ÷ 256
±1%
N
NB2869A
6 - 13
NB2969A
6 - 13
Y
Y
N
N
fin ÷ 256
±1%
Y
Y
Y
N
N
fin ÷ 256
±1%
Y, ÷ 2
NB2579A
13 - 30
Y
Y
N
Y
fin ÷ 640
±1%
N
NB2779A
13 - 30
Y
Y
Y
N
fin ÷ 640
±1%
N
NB2870A
13 - 30
Y
Y
N
N
fin ÷ 640
±0.75%
Y
NB2872A
15 - 30
Y
Y
N
N
fin ÷ 640
-1.25%
Y
NB2879A
15 - 30
Y
Y
N
N
fin ÷ 640
±1%
Y
NB2780A
30 - 50
Y
Y
Y
N
fin ÷ 1280
±0.75%
N
Key Performance Characteristics
•Replace ferrite beads and chokes
•Reduce peak EMI by 6 – 26 dBm
•Power Down mode reduces current draw to 4 μA
ON Semiconductor
Page 17
LDO Voltage Regulators
Single Output Low-Dropout Linear Regulators (LDOs)
Iout
Dropout* (typ)
Iq** (typ)
PSRR****
Absolute
Max Input
Voltage
NCP512
80 mA
160 mV
40 μA
60 dB
6V
SC-70-5
1.5, 1.8, 2.5, 2.7, 2.8, 3, 3.1,
3.3, 5 V
NCP553
80 mA
650 mV
2.8 μA
25 dB
12 V
SC82AB-4
1.5, 1.8, 2.5, 2.7, 2.8, 3,
3.3, 5 V
LM2931A/C/AC
100 mA
160 mV
400 μA
(@10mA)
90 dB
40 V
SO-8, TO-92-3, TO-220-3/5,
DPAK-3, D2PAK-3/5
Adj, 5 V
LP2950C/AC
100 mA
350 mV
75 μA
—
30 V
DPAK-3, TO-92-3
3, 3.3, 5 V
LP2951C/AC
100 mA
350 mV
75 μA
—
30 V
SO-8, Micro8, DIP-8
Adj, 3, 3.3, 5 V
Device
Package(s)-pins
Vout
Features
Enable
Ultra Low Iq, No Cap
High PSRR
Tight Line & Load Reg.
Enable, Error Output
NCP612
100 mA
200 mV
40 μA
60 dB
6V
SC-70-5
1.5, 1.8, 2.5, 2.7, 2.8, 3, 3.1,
3.3, 5 V
NCP662
100 mA
230 mV
2.5 μA
25 dB
6V
SC82AB-4
1.5, 1.8, 2.5, 2.7, 2.8, 3,
3.3, 5 V
Enable, Ultra Low Iq
NCP663
100 mA
230 mV
2.5 μA
25 dB
6V
SC82AB-4
1.5, 1.8, 2.5, 2.7, 2.8, 3,
3.3, 5 V
Ultra Low Iq
NCP580
120 mA
180 mV
90 μA
80 dB
6.5 V
SC82AB-4
1.5, 1.8, 2.5, 2.8, 3, 3.3 V
Enable, Ultra Low Noise
MC78PC
150 mA
200 mV (@100 mA)
35 μA
70 dB
9V
SOT-23-5
1.8, 2.5, 2.8, 3, 3.3, 5 V
Enable, Ultra Low Noise
Enable, Fast Transient
Enable
NCP500
150 mA
150 mV
175 μA
62 dB
6V
SOT-23-5, (2x2.2) DFN-6
1.8, 1.85, 2.5, 2.6, 2.7, 2.8,
3, 3.3, 5 V
NCP511
150 mA
90 mV (@100 mA)
40 μA
60 dB
6V
SOT-23-5
1.5, 1.8, 2.5, 2.7, 2.8, 3,
3.3, 5 V
Enable
NCP551
150 mA
720 mV
4.0 μA
25 dB
12 V
SOT-23-5
1.5, 1.8, 2.5, 2.7, 2.8, 3,
3.3, 5 V
Enable, Ultra Low Iq
NCP623
150 mA
180 mV
170 μA
90 dB
12 V
Micro8, (3x3) DFN-6
3.3, 4, 5 V
Enable, Ultra Low Noise
NCP582
150 mA
220 mV
75 μA
70 dB
6.5 V
SOT-563-6, SC82AB-4
1.5, 1.8, 2.5, 2.8, 2.9, 3, 3.3 V
Enable, Ultra Low Noise
NCP583
150 mA
250 mV
1.0 μA
45 dB
6.5 V
SOT-563-6, SC82AB-4
1.5, 1.8, 2.5, 2.8, 2.9, 3, 3.3 V
Enable, Ultra Low Iq
NCP600***
150 mA
100 mV
175 μA
62 dB
6V
SOT-23-5
Adj
Enable, Fast Turn-ON
NCP584
200 mA
200 mV
3.5 μA
75 dB
6.5 V
SOT-23-5
0.9, 1.2, 1.5, 1.8, 2.6, 3.1 V
2.5, 3, 3.3, 5 V
Tight Line & Load Reg.
Enable, Tri-Mode
Enable, Tri-Mode
260 mV
125 μA
75 dB
13 V
SO-8, DPAK-3, SOT-223-3,
(4x4) DFN-8
300 mA
310 mV
3.5 μA
75 dB
6.5 V
SOT-23-5, HSON-6
0.9, 1.2, 1.8 V
500 mA
340 mV (max)
190 uA
—
16 V
SO-8
Adj
Enable, High Accuracy
500 mA
340 mV (max)
190 μA
75 dB
16 V
Micro8, (3x3) DFN-10
Adj, 2.5, 2.85, 3.3, 5 V
Enable, High Accuracy
300 mA
NCP585
NCP3334***
NCP3335A
*
Voltage dropout was measured at full load for Vout = 3.3 V where applicable unless noted.
** Iq was measured at 0 or 0.1 mA load unless noted
*** Release to Market in Q2-2006
**** PSRR was measured at f = 120 Hz for Vout = 3.3 when applicable.
Bold Denotes NEW Products, Packages, and/or Voltage Options
Contact an ON Sales Representative for other voltage options or for automotive grade regulators.
+4.0%
+1.5%
Key Performance Characteristics
•Maintains accuracy over full temperature and load
current operating conditions
0%
-1.5%
Enhanced
Tolerance
Typical Tolerance of
Competing Devices
MC33275
NCP3335A
-4.0%
Page 18
Portable Solutions
MiniGate™ Logic
Logic MiniGates
Designator
NL17SV**XV5T2
SOT-553 Package
NL17SZ**DFT2G
SOT-353 Package
NL17SZ**XV5T2
SOT-553 Package
00
4
4
4
2-Input NOR Gate
02
4
4
4
Input Inverter
04
4
4
4
Unbuffered Input Inverter
U04
4
4
Inverter, Open Drain
06
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Function
2-Input NAND Gate
Non-Inverting Buffer, Open Drain
07
2-Input AND Gate
08
Schmitt Inverter
14
Non-Inverting Buffer
16
4
4
Schmitt Buffer
17
2-Input OR Gate
32
2-Input XOR Gate
86
4
3-State, Non-Inverting Buffer, Active Low
125
4
4
3-State, Non-Inverting Buffer, Active High
126
4
4
4
MiniGate™ Operating Voltage vs Tpd with Drive Current
6.0
5.5
HC
5.0
Volts
SZ
2 mA
24 mA
4.0
3.6
VHC
8 mA
3.0
SV
24 mA
2.0
1.65
1.0
0.9
2.0
2.7
3.0
Tpd (ns)
5.0
7.0
Most devices also offered in Duals (NL27WZxx Series) or Triples (NL37WZxx Series)
MiniGate™ Package Size Comparison - 5 Leads
2.0
SC−88A/SOT−353
1.7
2.1
1.0
SOT−553
1.7
0.55
3.0
1.0
TSOP−5/SC-74A
2.75
SIM/SAM Card Interface ICs
Key Features of NCN4555/7
•Single & Dual SIM interface (Subscriber Identity Module)
•Sequencer on NCN4557
•1.8 V - 5.5 V Digital Input Voltage
•Fully compatible with ISO7816-3, GSM11.11/11.12/11.18,
IMT-2000 / 3G TS 31.101
•Supports 1.8 V / 3 V Cards
•Linear DC-DC Converter (LDO) able to supply current in excess
of 50 mA at 1.8 V & 3 V (Vbat ranging from 2.7 V to 5.5 V)
•Very low stand-by and operating power consumption
•>5 MHz clock frequency
•>7 kV HBM ESD protection
on SIM pins
•Low profile 3 mm x 3 mm
QFN-16 package
SIM Interface Device Comparison
Product Features
NCN4555
NCN4557
Analog Interfaces
1 card
2 cards
Card Types (V)
1.8/3
1.8/3
>5
>5
Built-In LDO-Type DC-DC
Built-In LDO-Type DC-DC
2.7 - 5.5
2.7 - 5.5
Max Clock Frequency (MHz)
Power Supply (Type)
Power Supply (V)
Activation/Deactivation
Packaging
Tempetarure Range (°C)
Wireless Protocol
ESD Protection (kV)
No
Yes
Low Profile QFN-16
Low Profile QFN-16
-25 to +85
-25 to +85
GSM 11.1x/3G TS 31.101
GSM 11.1x/3G TS 31.101
8
8
NCN4555
Demo Board
ON Semiconductor
Page 19
Sales and Design Assistance from ON Semiconductor
NORTH AMERICA SALES OFFICES & REP FIRMS
Alabama
Arizona
California
CANADA
Colorado
Connecticut
Florida
w w w. o n s e m i . c om
Iowa
Kansas
Maryland
Massachusetts
ON Semiconductor Distribution Partners
All American
www.allamerican.com
(800) 573-2727
Arrow Electronics
www.arrow.com
(800) 777-2776
Avnet
www.em.avnet.com
(800) 332-8638
Chip Supply
www.chipsupply.com
(407) 298-7100
Digi-Key
www.digikey.com
(800) 338-1003
EBV Elektronik
www.ebv.com/en/locations.html
(49) 8121 774-0
Farnell InOne
www.farnellinone.com
+44 8701 200 200
Future Electronics Europe
www.futureelectronics.com/contact
[email protected]
Future & FAI Electronics
www.futureelectronics.com/contact
1-800-FUTURE1 (388-8731)
Minco
www.mincotech.com
(512) 834-2022
Newark Electronics
www.newark.com
(800) 4-NEWARK
Rochester Electronics
www.rocelec.com
(978) 462-9332
Semi Dice Inc
www.semidice.com
1 (800) 345-6633
Silica (An Avnet Company)
www.silica.com
+33 1 6447 2929
Spoerle
www.spoerle.de/de/about/offices
+49 6103 3040
INTERNATIONAL
BRAZIL
CHINA
FRANCE
GERMANY
San Paulo
Beijing
Chengdu
Shenzhen
Shanghai
Paris
Munich
Michigan
Minnesota
Missouri
New Jersey
New York
Ohio
Oregon
Pennsylvania
Texas
Washington
Wisconsin
INTERNATIONAL
(55-11) 3842-8911
86-10-8518-2323
86-28-8678-4078
86-755-8209-1128
86-21-5131-7168
33 (0)1 39-26-41-00
49 (0) 89-93-0808-0
HONG KONG
INDIA
ISRAEL
ITALY
JAPAN
KOREA
MALAYSIA
Georgia
Illinois
Indiana
Hong Kong
Bangalore
Herzelia
Milan
Tokyo
Seoul
Penang
Huntsville
Huntsville
Phoenix
Santa Clara
Irvine
San Diego
All Regions
Englewood
e-Components
ON Sales Office
Compass Southwest
T3 Technical Sales
Compass Southwest
Compass Southwest
Astec
ON Sales Office
Monroe
Boca Raton
Lake Mary
Plantation
Palm Harbor
Melbourne
Duluth
Hoffman Estates
Fishers
Kokomo
Cedar Rapids
Overland Park
Columbia
Burlington
Lowell
Livonia
Eden Prairie
St. Charles
Denville
Long Island
New York City
Rochester
Binghamton
Brecksville
Portland
Hatboro
Austin
Richardson
Bellevue
Statewide
Impact Technical Sales
e-Components
e-Components
ON Sales Office
e-Components
e-Components
e-Components
Stan Clothier
Bear VAI
ON Sales Office
Stan Clothier
Stan Clothier
Third Wave Solutions
Impact Technical Sales
ON Sales Office
ON Sales Office
Stan Clothier
Stan Clothier
CJR Associates
CJR Associates
CJR Associates
TriTech
TriTech
Bear VAI
SiFore Technical Sales
Delta Technical Sales
West Associates
West Associates
SiFore Technical Sales
Stan Clothier
852-2689-0088
91-80-2532-5084
972 (0) 9-9609-111
39 02-530-0951
81-3-5773-3850
82-2-2190-3500
60-4-226-9368
INTERNATIONAL
MEXICO
SINGAPORE
SLOVAKIA
TAIWAN
UNITED KINGDOM
Guadalajara
Singapore
Piestany
Taipei
Slough
(256) 533-2444
(256) 774-1004
(480) 763-0968
(408) 350-3900
(949) 580-0270
(858) 635-5959
(905) 607-1444
Karl Hill: (720) 895-1367
Mike Barone: (303) 670-8000
(203) 268-7229
(561) 289-1379
(407) 804-0042
(954) 325-1223
(727) 937-3016
(321) 676-5659
(678) 380-5080
(847) 781-4010
(317) 570-0707
(765) 865-2091
(319) 393-1576
(913) 894-1675
(410) 290-5990
(781) 238-8888
(978) 452-6075
(734) 953-6848
(952) 944-3456
(636) 916-3777
(973) 625-2796
(973) 625-2796
(973) 625-2796
(716) 385-6500
(607) 722-3580
(937) 748-1341
(503) 977-6267
(215) 957-0600
(512) 343-1199
(972) 680-2800
(425) 990-4701
(847) 781-4010
(5233) 3123-9199
65-6391-1260
(421) 33 790 2320
886-2-2377-9911
44 (0) 1296-610400
mCool and MiniGate are trademarks of SCILLC. Micro8 is a trademark of International Rectifier. FETKY is a registered trademark of International Rectifier. ChipFET is a trademark of Vishay Siliconix. POWERMITE is a registered trademark of Microsemi Corporation.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee
regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for
each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant
into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such
unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
BRD8026-2 PRINTED IN USA 06/06 IRONWOOD XXXX 5K
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada.
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
BRD8026/D