LCD and Camera EMI Filter Array with ESD Protection CM1442 Features Product Description • The CM1442 is a family of pi-style EMI filter arrays with ESD protection, which integrates six and eight filters (C-R-C) in Chip Scale Package form factor with 0.40mm pitch. The CM1442 has component values of 15pF-100Ω-15pF per channel. The CM1442 has a cut-off frequency of 120MHz and can be used in applications where the data rates are as high as 48Mbps. The parts include avalanche-type ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. • • • • • • • • • Six and eight channels of EMI filtering with integrated ESD protection 0.4mm pitch, 15-bump, 2.360mm x 1.053mm footprint Chip Scale Package (CM1442-06) 0.4mm pitch, 20-bump, 3.160mm x 1.053mm footprint Chip Scale Package (CM1442-08) Pi-style EMI filters in a capacitor-resistorcapacitor (C-R-C) network ±15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) ±30kV ESD protection on each channel (HBM) Greater than 30dB attenuation (typical) at 1 GHz Chip Scale Package features extremely low lead inductance for optimum filter and ESD performance OptiGuard™ coated for improved reliability at assembly Lead-free version available Applications • • • • • • LCD and Camera data lines in mobile handsets I/O port protection for mobile handsets, notebook computers, PDAs etc. EMI filtering for data ports in cell phones, PDAs or notebook computers. Wireless handsets Handheld PCs/PDAs LCD and camera modules This device is particularly well suited for portable electronics (e.g. wireless handsets, PDAs, notebook computers) because of its small package format and easy-to-use pin assignments. In particular, the CM1442 is ideal for EMI filtering and protecting data and control lines for the I/O data ports, LCD display and camera interface in mobile handsets. The CM1442 incorporates OptiGuard™ which results in improved reliability at assembly. The CM1442 is available in a space-saving, low-profile Chip Scale Package with optional lead-free finishing. It is manufactured with a 0.40mm pitch and 0.25mm CSP solder ball to provide up to 28% board space saving versus competing CSP devices with 0.50mm pitch and 0.30mm CSP solder ball. ©2010 SCILLC. All rights reserved. April 2010 Rev. 2 Publication Order Number: CM1442/D CM1442 Electrical Schematic 1 of 6 or 8 EMI/RFI + ESD Channels Rev. 2 | Page 2 of 15 | www.onsemi.com CM1442 PIN DESCRIPTIONS PIN(s) NAME A1 FILTER1 A2 DESCRIPTION PIN(s) NAME DESCRIPTION Filter + ESD Channel 1 C1 FILTER1 Filter + ESD Channel 1 FILTER2 Filter + ESD Channel 2 C2 FILTER2 Filter + ESD Channel 2 A3 FILTER3 Filter + ESD Channel 3 C3 FILTER3 Filter + ESD Channel 3 A4 FILTER4 Filter + ESD Channel 4 C4 FILTER4 Filter + ESD Channel 4 A5 FILTER5 Filter + ESD Channel 5 C5 FILTER5 Filter + ESD Channel 5 A6 FILTER6 Filter + ESD Channel 6 C6 FILTER6 Filter + ESD Channel 6 A7 FILTER7 Filter + ESD Channel 7 C7 FILTER7 Filter + ESD Channel 7 A8 FILTER8 Filter + ESD Channel 8 C8 FILTER8 Filter + ESD Channel 8 B1-B4 GND Device Ground Ordering Information PART NUMBERING INFORMATION Lead-free Finish2 Standard Finish Bumps Package Ordering Part Number1 Part Marking Ordering Part Number1 Part Marking 15 CSP CM1442-06CS N426 CM1442-06CP N426 20 CSP CM1442-08CS N428 CM1442-08CP N428 Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. Note 2: Lead-free devices are specified by using a "+" character for the top side orientation mark. Rev. 2 | Page 3 of 15 | www.onsemi.com CM1442 Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER RATING UNITS -65 to +150 °C DC Power per Resistor 100 mW DC Package Power Rating 500 mW RATING UNITS -40 to +85 °C Storage Temperature Range STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE1) SYMBOL R PARAMETER CONDITIONS Resistance CTOTAL MIN TYP MAX UNITS 80 100 120 Ω Total Channel Capacitance At 2.5VDC Reverse Bias, 1MHz, 30mVAC 24 30 36 pF C Capacitance C1 At 2.5VDC Reverse Bias, 1MHz, 30mVAC 12 15 18 pF VDIODE Standoff Voltage IDIODE=10μA 6.0 ILEAK Diode Leakage Current (reverse bias) VDIODE= 3.3V 0.1 1 μA VSIG Signal Clamp Voltage Positive Clamp Negative Clamp ILOAD = 10mA ILOAD = -10mA 6.8 -0.8 9.0 -0.4 V V VESD RDYN f C In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4 Notes 2 and 3 Dynamic Resistance Positive Negative Cut-off Frequency ZSOURCE=50Ω, ZLOAD=50Ω 5.6 -1.5 V ±30 kV ±15 kV 2.3 0.9 Ω Ω 115 MHz R=100Ω, C=15pF Note 1: TA=25°C unless otherwise specified. Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: Unused pins are left open. Rev. 2 | Page 4 of 15 | www.onsemi.com CM1442 Performance Information Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 1. Insertion Loss vs. Frequency (A1-C1 to GND B1) Figure 2. Insertion Loss vs. Frequency (A2-C2 to GND B1) Rev. 2 | Page 5 of 15 | www.onsemi.com CM1442 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 3. Insertion Loss vs. Frequency (A3-C3 to GND B2) Figure 4. Insertion Loss vs. Frequency (A4-C4 to GND B2) Rev. 2 | Page 6 of 15 | www.onsemi.com CM1442 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 5. Insertion Loss vs. Frequency (A5-C5 to GND B3) Figure 6. Insertion Loss vs. Frequency (A6-C6 to GND B3) ) Rev. 2 | Page 7 of 15 | www.onsemi.com CM1442 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 7. Insertion Loss vs. Frequency (A7-C7 to GND B4, CM1442-08CS/CP Only) Figure 8. Insertion Loss vs. Frequency (A8-C8 to GND B4, CM1442-08CS/CP Only ) Rev. 2 | Page 8 of 15 | www.onsemi.com CM1442 Performance Information (cont’d) Typical Diode Capacitance vs. Input Voltage Figure 7. Filter Capacitance vs. Input Voltage (normalized to capacitance at 2.5VDC and 25°C) Rev. 2 | Page 9 of 15 | www.onsemi.com CM1442 Application Information PARAMETER VALUE Pad Size on PCB 0.240mm Pad Shape Round Pad Definition Non-Solder Mask defined pads Solder Mask Opening 0.290mm Round Solder Stencil Thickness 0.125mm - 0.150mm Solder Stencil Aperture Opening (laser cut, 5% tapered walls) 0.300mm Round Solder Flux Ratio 50/50 by volume Solder Paste Type No Clean Pad Protective Finish OSP (Entek Cu Plus 106A) Tolerance — Edge To Corner Ball +50μm Solder Ball Side Coplanarity +20μm Maximum Dwell Time Above Liquidous 60 seconds Maximum Soldering Temperature for Lead-free Devices using a Lead-free Solder Paste Non-Solder Mask Defined Pad 0.240mm DIA. Solder Stencil Opening 0.300mm DIA. Solder Mask Opening 0.290mm DIA. Figure 5. Recommended Non-Solder Mask Defined Pad Illustration Figure 6. Lead-free (SnAgCu) Solder Ball Reflow Profile Rev. 2 | Page 10 of 15 | www.onsemi.com 260°C CM1442 Mechanical Details CSP Mechanical Specifications CM1442 devices are supplied in custom Chip Scale Packages (CSP). Dimensions are presented below. For complete information on CSP packaging, see the California Micro Devices CSP Package Information document. CM1442-06 Mechanical Specifications The package dimensions for the CM1442-06 are presented below. PACKAGE DIMENSIONS Package Custom CSP Bumps 15 Millimeters Inches Dim Min Nom Max Min A1 2.315 2.360 2.405 0.911 A2 1.008 1.053 1.098 0.0397 0.0415 0.0432 B1 0.395 0.4000 0.405 0.0156 0.0157 0.0159 B2 0.195 0.2000 0.205 0.0076 0.0078 0.0080 B3 0.3415 0.3465 0.3515 0.0134 0.0136 0.0138 B4 0.3415 0.3465 0.3515 0.0134 0.0136 0.0138 C1 0.130 0.1800 0.230 0.0051 0.0071 0.0091 C2 0.130 0.1800 0.230 0.0051 0.0071 0.0091 D1 0.575 0.644 0.714 0.0226 0.0254 0.0281 D2 0.368 0.419 0.470 0.0145 0.0165 0.0185 # per tape and reel Nom Max 0.0929 0.0947 Package Dimensions for CM1442-06 Chip Scale Package 3500 pieces Controlling dimension: millimeters Rev. 2 | Page 11 of 15 | www.onsemi.com CM1442 CSP Tape and Reel Specifications PART NUMBER CHIP SIZE (mm) CM1442-06 2.36 X 1.053 X 0.644 POCKET SIZE (mm) TAPE WIDTH REEL B0 X A0 X K0 W DIAMETER 2.62 X 1.12 X 0.76 8mm 178mm (7") Figure 13. Tape and Reel Mechanical Data Rev. 2 | Page 12 of 15 | www.onsemi.com QTY PER REEL P0 P1 3500 4mm 4mm CM1442 Mechanical Details (cont’d) CM1442-08 Mechanical Specifications The package dimensions for the CM1442-08 are presented below. PACKAGE DIMENSIONS Package Custom CSP Bumps 15 Millimeters Inches Dim Min Nom Max A1 3.115 3.160 3.205 0.1226 0.1244 0.1262 A2 1.008 1.053 1.098 0.0397 0.0415 0.0432 B1 0.395 0.4000 0.405 0.0156 0.0157 0.0159 B2 0.195 0.2000 0.205 0.0076 0.0078 0.0080 B3 0.3415 0.3465 0.3515 0.0134 0.0136 0.0138 B4 0.3415 0.3465 0.3515 0.0134 0.0136 0.0138 C1 0.130 0.1800 0.230 0.0051 0.0071 0.0091 C2 0.130 0.1800 0.230 0.0051 0.0071 0.0091 D1 0.575 0.644 0.714 0.0226 0.0254 0.0281 D2 0.368 0.419 0.470 0.0145 0.0165 0.0185 # per tape and reel Min Nom Max Package Dimensions for CM1442-08 Chip Scale Package 3500 pieces Controlling dimension: millimeters Rev. 2 | Page 13 of 15 | www.onsemi.com CM1442 CSP Tape and Reel Specifications PART NUMBER CHIP SIZE (mm) POCKET SIZE (mm) B0 X A0 X K0 TAPE WIDTH W REEL DIAMETER QTY PER REEL P0 P1 CM1442-08 3.16 X 1.053 X 0.644 3.28 X 1.32 X 0.81 8mm 178mm (7") 3500 4mm 4mm Figure 14. Tape and Reel Mechanical Data Rev. 2 | Page 14 of 15 | www.onsemi.com CM1442 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 Rev. 2 | Page 15 of 15 | www.onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative