ONSEMI NCS2211DR2G

NCS2211
Low Distortion Audio Power
Amplifier with Differential
Output and Shutdown Mode
Product Description
http://onsemi.com
The NCS2211 is a high performance, low distortion Class A/B
audio amplifier. It is capable of delivering 1W of output power into an
8W speaker bridge-tied load (BTL). The NCS2211 will operate over a
wide temperature range, and it is specified for single-supply voltage
operation for portable applications.
It features low distortion performance, 0.2% typical THD + N @
1W and incorporates a shutdown/enable feature to extend battery life.
The shutdown/enable feature will reduce the quiescent current to 1mA
maximum.
The NCS2211 is designed to operate over the -40°C to +85°C
temperature range, and is available in an 8-lead SOIC package and a
3X3 mm DFN8 package. The SOIC package is pin compatible with
equivalent function and comparable performance to competitive
devices as is the DFN8 package. The DFN8 has a low thermal
resistance of only 70°C/W plus has an exposed metal pad to facilitate
heat conduction to copper PCB material.
Low distortion, high power, low quiescent current, and small
packaging makes the NCS2211 suitable for applications including
notebook and desktop computers, PDA's, and speaker phones.
MARKING
DIAGRAMS
8
8
1
1
DFN8
MN SUFFIX
CASE 506BJ
1
N2211
A
L
Y
W
G
8
N2211
ALYWG
G
= Specific Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb-Free Package
(Note: Microdot may be in either location)
•Differential Output
•1.0 W into an 8 W Speaker
•1.5 W into a 4 W Speaker
•Single Supply Operation: 2.7 V to 5.5 V
•THD+N: 0.2% @ 1 W Output
•Low Quiescent Current: 20 mA Max
•Shutdown Current < 1.0 mA
•Excellent Power Supply Rejection
•Two Package Options: SOIC-8 Package and DFN8
•Pin Compatible with Competitive Devices
•These are Pb-Free Devices
PIN ASSIGNMENT
Applications
•Desktop Computers
•Notebook Computers
•PDA's
•Speaker Phones
•Games
February, 2008 - Rev. 0
N2211
ALYWG
G
1
Features
© Semiconductor Components Industries, LLC, 2008
SOIC-8
D SUFFIX
CASE 751
PIN
NAME
DESCRIPTION
1
Enable
Enable (LOW)/Shutdown (HIGH)
2
Bias
3
IN+
Non-Inverting Input
4
IN-
Inverting Input
5
OUT+
6
VCC
Positive Supply (Bypass with
10mF in parallel with 0.1mF)
7
VEE
Negative Supply (Connect to GND
for Single-Supply Operation)
8
OUT-
Bias Output at (VCC-VEE)/2;
Bypass with Capacitor to
Reduce Noise
Output+
Output-
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
1
Publication Order Number:
NCS2211/D
NCS2211
PIN CONNECTIONS for SOIC-8 and DFN8
Enable
1
8 OUT-
Bias
2
7 VEE
IN+
3
6 VCC
IN-
4
5 OUT+
(Top View)
VCC 6
R2
R
C1
R1
4
+
(-) Input
5
3
R
Bias
Filtering
R
Output (+)
(+) Input
RL
+
8
Output (-)
2
R
C2
1 Enable
7
VEE
Figure 1. Block Diagram
Enable (Note 1)
High
Low
Shutdown
Enabled
1. Enable (pin 1) must be actively driven for proper operation and cannot be left floating. See
ENABLE/SHUTDOWN CONTROL in the specification table for proper logic threshold levels.
MAXIMUM RATINGS
Parameter
Symbol
Rating
Unit
VCC
5.5
Vdc
Output Current
IO
500
mA
Maximum Junction Temperature (Note 2)
TJ
150
°C
Operating Ambient Temperature
TA
-40 to +85
°C
Storage Temperature Range
Tstg
-60 to +150
°C
Power Dissipation
PD
(See Graph)
mW
Thermal Resistance, Junction-to-Air - SOIC-8
Thermal Resistance, Junction-to-Air - DFN8 (Note 4)
qJA
117
70
°C/W
Power Supply Voltages
Moisture Sensitivity (Note 3)
Level 1
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded.
3. For additional information, see Application Note AND8003/D
4. As mounted on an 80x80x1.5 mm FR4 PCB with 650 mm2 and 2 oz (0.034 mm) thick copper heat spreader. Following JEDEC JESD/EIA
51.1, 51.2, 51.3 test guidelines.
http://onsemi.com
2
NCS2211
DC ELECTRICAL CHARACTERISTICS (VCC = +5 V, AVD = 2, RL = 8 W, C2 = 0.1 mF, TA = 25°C, unless otherwise specified)
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
POWER SUPPLY
VCC
Operating Voltage
Range
2.7
IS, ON
Power Supply Current
- Enabled
VCC = 2.7 V to 5.5 V
TA = -40°C to +85°C (Note 5)
20
IS, OFF
Power Supply Current
- Shutdown
VCC = 2.7 V to 5.5 V
TA = -40°C to +85°C (Note 5)
1.0
PSRR
Power Supply
Rejection Ratio
VCC = 2.7 V to 5.5 V
TA = -40°C to +85°C
V
5.5
mA
mA
dB
75
ENABLE/SHUTDOWN CONTROL
VIH
Enable Input High
Device Shutdown
VCC = 2.7 V to 5.5 V
90% X VCC
VCC
VIL
Enable Input Low
Device Enabled
VCC = 2.7 V to 5.5 V
GND
10% x VCC
V
V
OUTPUT CHARACTERISTICS
VOH
Output High Voltage
From Either Output to GND
RL = 8 W
VCC - 0.400
VOL
Output Low Voltage
From Either Output to GND
RL = 8 W
0.400
Vout -off
IO
Differential Output
Offset Voltage
V
V
VCC = 2.7 V to 5.5 V (Note 5)
TA = -40°C to +85°C
Output Current
Output to Output
$50
350
mV
mA
AC ELECTRICAL CHARACTERISTICS (VCC = +5 V, AVD = 2, RL = 8 W, C2 = 0.1 mF, TA = 25°C, unless otherwise specified)
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
FREQUENCY DOMAIN PERFORMANCE
GBW
Gain Bandwidth Product
12
MHz
AVD = +2, RL = 8 W, VCC = 5 V
80
°
VCC = 5 V, f = 1 kHz, P = 1.0 W into 8 W
VCC = 5 V, f = 1 kHz, P = 0.5 W into 8 W
VCC = 3.3 V, f = 1 kHz, P = 0.35 W into 8 W
VCC = 2.7 V, f = 1 kHz, P = 0.25 W into 8 W
0.2
0.15
0.1
0.1
%
Phase Margin
THD+N
Total Harmonic Distortion
TIME DOMAIN RESPONSE
tON
Turn on delay
VCC = 5 V
1
ms
tOFF
Turn off delay
VCC = 5 V
4
ms
5. Guaranteed by design and/or characterization.
http://onsemi.com
3
NCS2211
TYPICAL PERFORMANCE CHARACTERISTICS
1
TA = 25°C
VCC = 5.0 V
AVD = 2 (BTL)
RL = 8 W
TA = 25°C
VCC = 5.0 V
AVD = 2 (BTL)
RL = 8 W
THD + N (%)
THD + N (%)
1
C2 = 0.1 mF
0.1
C2 = 1.0 mF
0.01
C2 = 0.1 mF
0.1
C2 = 1.0 mF
0.01
20
100
1k
10 k
20
FREQUENCY (Hz)
Figure 2. THD + N vs. Frequency
(PL = 500 mW)
Figure 3. THD + N vs. Frequency
(PL = 1 W)
10 k
10
TA = 25°C
VCC = 5.0 V
AVD = 10 (BTL)
RL = 8 W
THD + N (%)
TA = 25°C
VCC = 5.0 V
AVD = 10 (BTL)
RL = 8 W
THD + N (%)
1k
FREQUENCY (Hz)
10
1
100
C2 = 0.1 mF
C2 = 0.1 mF
1
C2 = 1.0 mF
0.1
C2 = 1.0 mF
0.1
20
100
1k
10 k
20
1k
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 4. THD + N vs. Frequency
(PL = 500 mW)
Figure 5. THD + N vs. Frequency
(PL = 1 W)
10
10 k
10
TA = 25°C
VCC = 5.0 V
AVD = 20 (BTL)
RL = 8 W
C2 = 0.1 mF
THD + N (%)
THD + N (%)
100
C2 = 0.1 mF
1
TA = 25°C
VCC = 5.0 V
AVD = 20 (BTL)
RL = 8 W
1
C2 = 1.0 mF
C2 = 1.0 mF
0.1
0.1
20
100
1k
10 k
20
100
1k
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 6. THD + N vs. Frequency
(PL = 500 mW)
Figure 7. THD + N vs. Frequency
(PL = 1 W)
http://onsemi.com
4
10 k
NCS2211
TYPICAL PERFORMANCE CHARACTERISTICS
1
TA = 25°C
VCC = 3.3 V
AVD = 2 (BTL)
RL = 8 W
TA = 25°C
VCC = 2.7 V
AVD = 2 (BTL)
RL = 8 W
THD + N (%)
THD + N (%)
1
C2 = 0.1 mF
0.1
C2 = 0.1 mF
0.1
C2 = 1.0 mF
C2 = 1.0 mF
0.01
0.01
20
100
1k
10 k
20
FREQUENCY (Hz)
Figure 8. THD + N vs. Frequency
(PL = 350 mW)
Figure 9. THD + N vs. Frequency
(PL = 250 mW)
THD + N (%)
THD + N (%)
C2 = 0.1 mF
TA = 25°C
VCC = 2.7 V
AVD = 10 (BTL)
RL = 8 W
1
C2 = 0.1 mF
0.1
C2 = 1.0 mF
C2 = 1.0 mF
0.01
0.01
20
100
1k
10 k
20
100
1k
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 10. THD + N vs. Frequency
(PL = 350 mW)
Figure 11. THD + N vs. Frequency
(PL = 250 mW)
10
10 k
10
C2 = 0.1 mF
TA = 25°C
VCC = 3.3 V
AVD = 20 (BTL)
RL = 8 W
C2 = 0.1 mF
1
THD + N (%)
THD + N (%)
10 k
10
TA = 25°C
VCC = 3.3 V
AVD = 10 (BTL)
RL = 8 W
0.1
0.1
1k
FREQUENCY (Hz)
10
1
100
C2 = 1.0 mF
0.1
1
TA = 25°C
VCC = 2.7 V
AVD = 20 (BTL)
RL = 8 W
0.1 C2 = 1.0 mF
0.01
20
100
1k
10 k
20
100
1k
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 12. THD + N vs. Frequency
(PL = 350 mW)
Figure 13. THD + N vs. Frequency
(PL = 250 mW)
http://onsemi.com
5
10 k
NCS2211
TYPICAL PERFORMANCE CHARACTERISTICS
THD + N (%)
10
1.50
TA = 25°C
C2 = 0.1 mF
AVD = 2 (BTL)
RL = 8 W
STEADY STATE POWER (W)
100
VCC = 2.7 V
VCC = 5.0 V
VCC = 3.3 V
1
0.1
0.01
0.01
0.1
1
8 Lead DFN 150 mm2
1.00
SOIC-8 650 mm2
0.75
0.50
8 Lead
DFN - 50 mm2
0.25 SOIC-8 - 150 mm2
10
25
75
100
125
150
Figure 14. THD + N vs. POUTPUT
(Frequency = 20 Hz)
Figure 15. SOA Curve with PCB Copper
Thickness 2 oz and Various Areas
2.0
TA = 25°C
C2 = 0.1 mF
AVD = 2 (BTL)
RL = 8 W
1.8
VCC = 2.7 V
1.6
VCC = 5.0 V
1.4
Pout (W)
VCC = 5.0 V
VCC = 3.3 V
1.2
1.0
0.8
0.6
0.1
0.4
VCC = 3.3 V
0.2
0.01
VCC = 2.7 V
0
0.0001 0.001
0.01
0.1
1
10
4
8
12
16
20
24
28
32
36
40
POUTPUT (W)
LOAD RESISTANCE (W)
Figure 16. THD + N vs. POUTPUT
(Frequency = 1 kHz)
Figure 17. Pout vs. Load Resistance
TA = 25°C
C2 = 0.1 mF
AVD = 2 (BTL)
RL = 8 W
INTERNAL POWER DISSIPATION (W)
100
THD + N (%)
50
T-AMBIENT (°C)
1
10
SOIC-8 50 mm2
POUTPUT (W)
100
THD + N (%)
1.25
0
0.0001 0.001
10
8 Lead DFN - 650 mm2
VCC = 2.7 V
VCC = 5.0 V
VCC = 3.3 V
1
0.1
0.01
0.0001 0.001
0.01
0.1
1
VCC = 5 V
1.2
RL = 4 W
1.0
0.8
0.6
RL = 8 W
0.4
0.2
0
0.5
1.0
1.5
POUTPUT (W)
OUTPUT POWER (W)
Figure 18. THD + N vs. POUTPUT
(Frequency = 20 kHz)
Figure 19. Power Dissipation vs. Output
Power
http://onsemi.com
6
48
1.4
0
10
44
2.0
NCS2211
TYPICAL PERFORMANCE CHARACTERISTICS
Channel 1: Enable Logic
and OUT+ and OUT-
Channel 2: Differential
Output
Time Base: 1 mSec per
Division
Figure 20. Turn-on Time
Channel 1: SHUTDOWN
Logic and OUT+ and OUT-
Channel 2: Differential
Output
Time Base: 5 mSec per
Division
Figure 21. Turn-off Time
80
135
0.30
60
90
10 k
100 k
1M
10 M
-55
-65
0.10
-70
-45
0.05
-75
-90
100 M
0
0
1k
-50
0.15
0
100
VCC = 5 V
RL = 8 W
C2 = 22 mF
Ripple = 200 mVp-p
f-input = 1 kHz
-60
20
10
0.25
(dB)
-45
0.20
45
40
-20
OUTPUT THD + N (%)
0.35
GAIN (dB)
180
PHASE SHIFT (degrees)
100
0.1
1
10
100
1k
10 k
FREQUENCY (Hz)
FREQUENCY OF POWER-SUPPLY RIPPLE (Hz)
Figure 22. Gain and Phase Shift vs. Frequency
Figure 23. Power-Supply Rejection
http://onsemi.com
7
-80
100 k
NCS2211
APPLICATIONS INFORMATION
The NCS2211 is unity gain stable and therefore does not
require any compensation, but a proper power-supply
bypass is required as shown in Figure 24. Performance will
be enhanced by adding a filter capacitor (C2) to the
mid-supply node (pin 2). See Typical Performance
Characteristics for details.
It is preferable to AC couple the input to avoid a large
DC output offset.
Both outputs can be driven to within 400 mV of either
supply rail with an 8 W load.
Typical Application of the Device:
+5 V
VCC
R1
C1 20k
(-) Input
0.1 mF
6
C3
10 mF⎟⎟ 0.1 mF
R2
20k
4
+
5
Output (+)
3
2 VPP
RL
(+) Input
Bias
Filtering
+
8
Output (-)
2
C2
0.1 mF
7
1
Enable
VEE
Figure 24.
THERMAL CONSIDERATIONS
GAIN
Care must be taken to not exceed the maximum junction
temperature of the device (150°C). Figure 15 shows the
tradeoff between output power and junction temperature for
different areas of exposed PCB copper (2 oz). If the
maximum power is exceeded momentarily, normal circuit
operation will be restored as soon as the die temperature is
reduced. Leaving the device in an “overheated” condition
for an extended period can result in device burnout. To
ensure proper operation, it is important to observe the SOA
curves.
Since the output is differential, the gain from input to the
speaker is: AVD = 2 x R2/R1. For low level input signals,
THD will be optimized by pre-amplifying the signal and
running the NCS2211 at gain AVD = 2 and C2=1 mF.
BIAS FILTERING
Even though the NCS2211 will operate nominally with no
filter capacitor on pin 2, THD performance will be improved
dramatically with a filter capacitor installed (see Typical
Performance Characteristics). In addition a C2 filter
capacitor at pin 2 will suppress start-up popping noise. To
insure optimal suppression the time constant of the bias
filtering needs to be greater than the time constant of the
input capacitive coupling circuit, that is C2 x 25 k > C1 x R1.
ORDERING INFORMATION
Package
Shipping†
NCS2211DG
SOIC-8
(Pb-Free)
98 Units / Rail
NCS2211DR2G
SOIC-8
(Pb-Free)
2500 / Tape & Reel
NCS2211MNTXG
DFN-8
(Pb-Free)
3000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
8
NCS2211
PACKAGE DIMENSIONS
DFN8 3x3, 0.5P
CASE 506BJ-01
ISSUE O
PIN 1
REFERENCE
2X
0.10 C
2X
NOTES:
1. DIMENSIONS AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND 0.30
MM FROM TERMINAL.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
L
L1
ÇÇÇ
ÇÇÇ
ÇÇÇ
0.10 C
EDGE OF PACKAGE
A
B
D
DETAIL A
E
OPTIONAL
CONSTRUCTION
DIM
A
A1
A3
b
D
D2
E
E2
e
K
L
L1
L
TOP VIEW
DETAIL A
OPTIONAL
CONSTRUCTION
DETAIL B
0.05 C
A
8X
0.05 C
(A3)
NOTE 4
SIDE VIEW
A1
D2
8X
L
8X
K
1
DETAIL A
C
SEATING
PLANE
EXPOSED Cu
4
5
e
8X
SOLDERMASK DEFINED
MOUNTING FOOTPRINT
ÉÉ
ÉÉ
1.85
MOLD CMPD
8X
0.35
DETAIL B
E2
8
MILLIMETERS
MIN
MAX
0.80
1.00
0.00
0.05
0.20 REF
0.18
0.30
3.00 BSC
1.64
1.84
3.00 BSC
1.35
1.55
0.50 BSC
0.20
--0.30
0.50
0.00
0.03
OPTIONAL
CONSTRUCTION
3.30
1.55
0.63
0.50
PITCH
b
0.10 C A B
BOTTOM VIEW
0.05 C
NOTE 3
8X
DIMENSION: MILLIMETERS
http://onsemi.com
9
NCS2211
PACKAGE DIMENSIONS
SOIC-8
D SUFFIX
CASE 751-07
ISSUE AH
-X-
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 751-01 THRU 751-06 ARE OBSOLETE. NEW
STANDARD IS 751-07.
A
8
5
S
B
0.25 (0.010)
M
Y
M
1
4
K
-YG
C
N
DIM
A
B
C
D
G
H
J
K
M
N
S
X 45 _
SEATING
PLANE
-Z-
0.10 (0.004)
H
M
D
0.25 (0.010)
M
Z Y
S
X
J
S
MILLIMETERS
MIN
MAX
4.80
5.00
3.80
4.00
1.35
1.75
0.33
0.51
1.27 BSC
0.10
0.25
0.19
0.25
0.40
1.27
0_
8 _
0.25
0.50
5.80
6.20
INCHES
MIN
MAX
0.189
0.197
0.150
0.157
0.053
0.069
0.013
0.020
0.050 BSC
0.004
0.010
0.007
0.010
0.016
0.050
0 _
8 _
0.010
0.020
0.228
0.244
SOLDERING FOOTPRINT*
1.52
0.060
7.0
0.275
4.0
0.155
0.6
0.024
1.270
0.050
SCALE 6:1
mm Ǔ
ǒinches
*For additional information on our Pb-Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operat‐
ing parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor
the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associ‐
ated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/
Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P
.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
http://onsemi.com
10
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCS2211/D