FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES ■ FEATURES ● ● ● ● Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment. High surge voltage 2,500 V minimum of surge strength (Bellcore standard), and 1,500 VAC minimum of dielectric strength between coil and contact (-15, -16 type). Low power consumption 85 mW of operate power (150 mW of nominal power consumption) by built-in permanent magnet. Shipping tube package ■ ORDERING INFORMATION [Example] FBR46 (a) N (b) D (*) 012 (c) -P (d) -15 (e) -CSA (f ) (a) Series Name FBR46 : FBR46 Series (b) Enclosure N : Plastic sealed (*) Coil Type D G L1 L2 : Standard, -15, -16 (DC coil) : 65% Operate type : Single winding latching type : Double winding latching type (refer to the SPECIFICATIONS) (c) Nominal Voltage (Example) Standard, -15, -16 type (Example) Latching type 005: 5 VDC 05: 5 VDC 012: 12 VDC 12: 12 VDC (refer to the COIL DATA CHART) (d) Contact Material –P : Gold-overlay silver-palladium (e) Dielectric Strength Nil -15 -16 : Between coil and contacts 1,000 VAC, between contacts 750 VAC : Between coil and contacts 1,500 VAC, between contacts 750 VAC : Between coil and contacts 1,500 VAC, between contacts 1,000 VAC (f) Safety Specification Nil : Standard (UL114 recognized) -CSA : UL114 + CSA recognized Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR46ND012-P Stamp: 46ND012-P 1 FBR46 SERIES ■ SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) C22.2 No. 14 (File No. LR40304 or LR64026) Nominal voltage Contact rating 1 A 30 VDC resistive 0.5 A 120 VAC resistive 1.5 to 24 VDC * Excluding latching type FBR46L ■ SPECIFICATIONS Item Contact D type, G type Arrangement and Style 2 form C (DPDT), bifurcated Material Gold-overlay silver-palladium Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) Ratings (resistive) 0.5 A 120 VAC or 1 A 30 VDC Maximum Carrying Current 1.25 A Maximum Switching Power 60 AV or 30 W Max. Switching Voltage*1 Maximum Switching Current Minimum Switching load*2 Electrostatic Capacity (reference) Coil Insulation -16 type Latching 125 V 1A 0.01 mA 10 mVDC (reference) Approximately 2 pF (between coil and contacts) Approximately 1 pF (between open contacts) Nominal power (at 20°C) 0.15 to 0.2 W 0.25 W 0.2 to 0.25 W 0.2 W Operate power (at 20°C) 0.085 to 0.112 0.106 W maximum 0.112 to 0.14 W maximum 0.128 W maximum Operating Temperature –30°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity Time Value -15 type 45 to 85%RH Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Maximum 2 ms Resistance (initial) Minimum 1000 MΩ (at 500 VDC) Dielectric between coil and contacts Strength between adjacent contacts (for 1 minute) between open contacts between set-reset-coil Surge Strength 1,000 VAC 1,500 VAC 750 VAC 1,000 VAC 1,000 VAC 750 VAC — 250 VAC 2,500 V between coil and contacts between adjacent contacts 1,500 V (at 10 × 700 µs) 2,500 V (at 2 × 10 µs)1,250 V between open contacts 1,500 V(at 10 × 700 µs) 1,500 V (at 10 × 700µs) 2 µs 10 µs 1,500 V 750 V 10 µs 700 µs Continued 2 FBR46 SERIES Item Life Other D type, G type Mechanical 50 × Electrical (refer to the REFERENCE DATA) DC AC *2 -15 type -16 type Latching operations minimum 2× 105 operations minimum (at contact rating) 1× 105 operations minimum (at contact rating) Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm) Shock Resistance Misoperation 500 m/s2 (11 ±1 ms) Endurance 1,000 m/s2 (11 ±1 ms) Weight *1 106 Approximately 2.5 g If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. ■ COIL DATA CHART 1. STANDARD (D type) Coil resistance (±10%) Nominal current (at nominal voltage) approx. MODEL Nominal voltage FBR46ND003-P 3 VDC 60 Ω 50 mA FBR46ND005-P 5 VDC 167 Ω 30 mA FBR46ND006-P 6 VDC 240 Ω 25 mA FBR46ND009-P 9 VDC 540 Ω 17 mA FBR46ND012-P 12 VDC 960 Ω 13 mA FBR46ND024-P 24 VDC 2,880 Ω 8 mA Must operate voltage*1 Must release voltage*1 75% max. of nominal voltage 5% min. of nominal voltage Coil temperature rise Nominal power Operate power Approx. 150 mW (at nominal voltage Approx. 85 mW max. Approx. 25 deg (at nominal voltage) 200 mW 112 mW 30 deg Nominal power Operate power Coil temperature rise Approx. 250 mW (at nominal voltage Approx. 106 mW max. *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C 2. 65% OPERATE TYPE (G type) MODEL Nominal voltage Coil resistance (±10%) Nominal current (at nominal voltage) approx. FBR46NG003-P 3 VDC 36 Ω 83 mA FBR46NG005-P 4.5 VDC 81 Ω 56 mA FBR46NG006-P 6 VDC 144 Ω 41 mA FBR46NG009-P 9 VDC 324 Ω 27 mA FBR46NG012-P 12 VDC 576 Ω 20 mA FBR46NG024-P 24 VDC 2,304 Ω 10 mA Must operate voltage*1 Must release voltage*1 65% max. of nominal voltage 10% min. of nominal voltage Approx. 35 deg (at nominal voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C 3 FBR46 SERIES 3. HIGH DIELECTRIC STRENGTH TYPE (-15, -16 type) MODEL -15 type Nominal voltage -16 type Nominal Coil current Must resistance (at nominal operate 1 voltage) voltage* (±10%) approx. FBR46ND003-P-15 FBR46ND003-P-16 3 VDC 45 Ω 67 mA FBR46ND005-P-15 FBR46ND005-P-16 5 VDC 125 Ω 40 mA FBR46ND006-P-15 FBR46ND006-P-16 6 VDC 180 Ω 33 mA FBR46ND009-P-15 FBR46ND009-P-16 9 VDC 405 Ω 22 mA FBR46ND012-P-15 FBR46ND012-P-16 12 VDC 720 Ω 17 mA 2,304 Ω 10 mA FBR46ND024-P-15 FBR46ND024-P-16 24 VDC Must release 1 voltage* Nominal power Operate power Coil temperature rise 75% max. 5% min. Approx. Approx. Approx. of of 200 mW 112 mW 30 deg nominal nominal (at nominal max. (at nominal voltage voltage voltage) voltage) 250 mW 140 mW 35 deg *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 4. LATCHING TYPE (L1, L2 type) Nominal voltage Coil resistance (±10%) Nominal current (at nominal voltage) approx. MODEL Single winding latching type Double winding latching type FBR46NL103-P FBR46NL203-P 3 VDC 45 Ω 67 mA FBR46NL105-P FBR46NL205-P 5 VDC 125 Ω 40 mA FBR46NL106-P FBR46NL206-P 6 VDC 180 Ω 33 mA FBR46NL109-P FBR46NL209-P 9 VDC 405 Ω 22 mA FBR46NL112-P FBR46NL212-P 12 VDC 720 Ω 17 mA Must operate voltage*1 Must release voltage*1 Nominal power Operate power 80% max. 80% max. Approx. Approx. of nominal of nominal 200 mW 128 mW voltage voltage (at nominal max. voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 4 FBR46 SERIES ■ CHARACTERISTIC DATA per to Mus 130 120 Operating voltage range 110 100 90 80 pera to Mus 70 70 Must ltage te vo opera –10 0 10 20 30 40 50 60 70 80 –10 0 10 20 30 40 50 60 70 80 –10 0 10 20 30 40 50 60 70 80 Operating temperature (˚C) Operating temperature (˚C) Operating temperature (˚C) Maximum switching capacity ➀AC resistive load ( AC contact rating) ➁DC resistive load ( DC contact rating) 1.0 ➀ ➁ 0.5 0.3 Life curve (×104) 500 Service life (operations) Contact load current (A) olta te v Nominal voltage multiplying factor (%) Nominal voltage multiplying factor (%) 70 ge 80 140 ge volta coil able olta ate v 90 150 allow ge 80 100 (Data) assumes that the maximum allowable temperature of E type insulation coil is 115˚C 160 imum 90 Operating voltage range 110 Range of operation temperature and voltage [–15,–16 type] Max 100 120 ge Operating voltage range 110 130 volta 120 140 coil 130 150 able e oltag oil v ble c owa 140 allow all imum Max 150 (Data) assumes that the maximum allowable temperature of E type insulation coil is 115˚C 160 imum Max (Data) assumes that the maximum allowable temperature of E type insulation coil is 115˚C 160 Range of operation temperature and voltage [G type] Nominal voltage multiplying factor (%) Range of operation temperature and voltage [D type] 30 V DC resistive load 100 50 120 V AC resistive load 10 5 0.1 1 10 20 30 120 50 0.5 200 1.0 1.5 2.0 Contact load current (A) Contact load voltage (V) ■ REFERENCE DATA Distribution of operate and release voltage Distribution of operate and release time 80 Distribution of contact resistance 80 100 Operate Release Operate Release 40 Distribution (%) Distribution (%) Distribution (%) 80 60 60 40 20 60 40 20 20 0 0 0 10 20 30 40 50 60 70 80 Rated coil voltage multiplying factor (%) 0 0 1 2 3 4 5 Time (ms) 6 7 8 0 10 20 30 40 50 60 70 80 Contact resistance (mΩ) 5 FBR46 SERIES ■ DIMENSIONS ●Dimensions 9.8+0.1 1 3 5 6 12 10 8 7 ●PC board mounting hole layout (BOTTOM VIEW) 3.5 7.62 7.9+0.1 15.9+0.1 ●Schematics (BOTTOM VIEW) 8–ø0.8 Polarity (1.0) 5.08 5.08 (1.09) 5.08 5.08 2.54 7.62 .54 ●Tube carrier 501 maximum 15.8 maximum 12.8 max. 9.8+0.1 +0.1 15.9+0.1 ( ) 7.9 3.5 12 11 ✽ 10 5 6 8 7 5.08 5.08 2.54 5.08 (1.09) 7.62 2.54 10–ø0.8 ( ) polarity Note: ·No 2, 11 terminals are for double winding latching type only. ·( )( ) are reset polarity for single winding latching type. ·The terminal number is not shown on the relay. ●Tube carrier 12.8 max. ●PC board mounting hole layout (BOTTOM VIEW) 2.54 1 2 3 2.54 5.08 (1.0) 15.8 maximum ●Schematics (BOTTOM VIEW) 7.62 ●Dimensions (Latching type) 501 maximum Unit: mm 6 FBR46 SERIES Fujitsu Takamisawa International Headquarter Offices www.fujitsu.takamisawa.com Japan Fujitsu Takamisawa Component Limited Global Marketing and Sales Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 North and South America Fujitsu Takamisawa America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Europe Fujitsu Takamisawa Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Asia Pacific Fujitsu Takamisawa Asia Pacific Pte. Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 7