HRS MC-213SD

Coil Components (SMD)
MC-200SC and MC-200SD Series
■Features
1.Excellent High Frequency Characteristics
Insertion loss: 0.6 dB TYP.
Phase balance: ±3deg TYP.
MC-201SC
MC-212SC
MC-217SC
MC-218SC
2.Highly Reliable Design
MC-201SD
MC-211SD
MC-212SD
PPS resin is used for the exterior cladding of the
cover, glass epoxy substrate is used for the board
material, and solder plating is used for the electrodes.
All these factors contribute to excellent mechanical
strength, heat resistance, and soldering qualities
MC-213SD
3.Suited to Automatic Mounting
Embossed tape packaging permits automatic mounting.
(Individual delivery can also be accommodated.)
■Product Specifications
Frequency range (Note)
Characteristic impedance (Note)
Maximum Input Power
Ratings
30 to 370 MHz
50 ohms, 75 ohms
0.5 W
Operating temperature range
-10ç to +65ç
Operating relative humidity
95% Max.
Note: The frequency range and the characteristic impedance will differ depending on the products.
Item
Standard
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 4 hours in each of 3 directions
1.Vibration
2.Shock
No damage, cracks, or parts dislocation
Acceleration of 294 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis
(-60 to 55ç: 30 min. → 20 to 35ç: 15 min.
→ 125 to 128ç: 30 min. → 20 to 35ç: 15 min.)
for 100 cycles
3.Temperature cycle
4.Corrosion resistance
No serious corrosion
Exposed to 5% salt water solution for 48 hours
●The test method conforms to MIL-STD-202.
■Materials
■External Dimensions
Part
Material
Finish
Board
Glass epoxy
Solder plating
Cover
PPS
-----------
■Ordering Information
MC - 2 0 1 S C
1
2 3 4 5
4 Suffix
2 Number of Divisions
5 Board Mounting Method
3 Phase Difference
Indicated by phase difference of output.
0 : 0°
1 : 90°
46
6
1 Series Name: MC
Indicated by number of divisions of output.
input
S : SMT type
6 Characteristic Impedance
C : 75 ohms
D : 50 ohms
●The contact numbers
are common for both the
0° type and the 90° type.
■Specifications
Part Number
Frequency Phase π above 3dB
Range Difference Insertion Loss
(MHZ)
(deg)
(dB Max)
Isolation
(dB Min)
V.S.W.R.
(Max)
Balance
Phase
(deg)
Amplitude
(dB)
Impedance
(ohms)
Weight
(g)
MC-201SC
030~200
0
0.6
20
1.3
±3
±0.1
75
1
MC-212SC
050~095
– 90
0.6
20
1.2
±3
±0.5
75
1
MC-217SC
045~070
– 90
0.6
20
1.2
±3
±0.5
75
1
MC-218SC
070~100
– 90
0.6
20
1.2
±3
±0.5
75
1
MC-201SD
030~230
0
0.6
20
1.3
±3
±0.15
50
1
MC-211SD
170~230
– 90
0.6
20
1.2
±3
±0.5
50
1
MC-212SD
045~104
– 90
0.6
20
1.2
±3
±0.5
50
1
MC-213SD
330~370
– 90
1.3
16
1.4
±4
±0.5
50
1
Note 1: The insertion loss of the 2-way 90° type is the average output of the 0° port and the -90° port minus 3 dB coupling.
Note 2: When ordering items with embossed tape packaging, affix (06) to the end of the product number. One reel contains 500 pieces.
■Function Diagram
■PCB Mounting Pattern
Pins 2, 3, 4, 5, and 6 are ground.
Pins 3, 4, 7, and 8 are ground.
●Please apply resist processing to the area around the
electrode pads.
■Precautions
1.Soldering
(1)Recommended temperature profile
Preheating
40 to 120 s
Soldering
20 to 60 s
Slow cooling
Natural cooling
for 1 minute Min.
Note 1: Up to 2 cycles of reflow soldering are possible under the same conditions,
provided that there is a return to normal temperature between the first and second
cycle.
Note 2: The temperature profile indicates the board surface temperature at the
point of contacts with the connector terminals (for surface mounted receptacle).
(2)Recommended manual soldering
Manual soldering: 260ç for 10 seconds
(3)Recommended screen thickness
0.15 mm
2.Product Storage
1After opening the package reseal promptly or store in a desiccator with a
desiccant.
2Store in a place that is not exposed to harmful gases which include sulfur or
chlorine, etc.
3Use within one year of delivery.
47
■Typical Data
48
MC-201SC
MC-212SC
MC-217SC
MC-218SC
MC-201SD
MC-211SD
MC-212SD
MC-213SD