NEW Interface Connectors for Miniature, Portable Terminal Devices ST Series Strong locking mechanism Right Mating direction Left 49N max. Top ■Overview Developed as external input/output connectors for the portable and mobile devices used in consumer markets. As such, the connectors incorporate features required to assure reliable electrical and mechanical performance under extreme and unpredictable conditions. Bottom Prevention against reversed or angle insertion ■Features 1. Strong locking mechanism To assure continuous reliability of the connection in an unpredictable consumer environment, mated connectors will withstand pull force of 49N max. applied in any direction. Polarization keys Contacts are not damaged! 2. Prevention against reversed or angle insertion Multiple polarization keys will not allow incorrect insertion of the mating plug. In addition, contacts will not be damaged when the user attempts to insert only the corner of the mating plug. 3. Small size and low profile Contact pitch of 0.5 mm and utilization of state-of-the-art manufacturing technologies has produced receptacle height of 3 mm above the board and maximum thickness of the plug of only 7 mm. 4. EMI protection Plug variations Identification surface Built-in ground continuity features and EMI shielding assure interference free performance. 5. Wide variety of contact positions and mounting styles Standard, reverse, vertical and cradle mountings, as well as utilization of variety of cables and conductors assure application of this connector in diversified applications. ■Applications Reverse plug Identification surface Standard plug Digital Still Cameras, Personal Digital Assistance, Notebook computers, Cellular phones, Portable readers, Mobile recorders and any mobile or portable device requiring high reliability small size input/output connection. 2004.6 1 ■Specifications Rating Current rating 0.5A (1 A max. can be carried via 4 random contacts) Operating temperature range : -30ç to +80ç Voltage rating 100V AC : -40ç to +85ç (Note) Characteristic Storage temperature range Specification 11. Contact resistance 12. Insulation resistance 13. Dielectric withstanding voltage 14. Mating/un-mating forces 15. Durability (mating/un-mating) Conditions 60m ø max. 100M ø min. No flashover or insulation breakdown. Mating: 29.4N max. 100mA DC 250V DC 350V AC/ one minute With corresponding connector. Contact resistance: 50 m ø max. 10000 cycles Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. Temperature : -55ç ➝ +5ç to +35ç ➝ +85ç ➝ +5ç to +35ç Contact resistance: 100m ø max. 17. Temperature cycle Time (Minutes) : 30 ➝ 5 ➝ 30 ➝ 5 Insulation resistance: 1000M ø min. 5 cycles 5±1% salt water solution at 35±3ç for 48 hours, after No corrosions 18. Salt spray washing without salt, leave for 24 hours at room temperature Fully inserted and locked corresponding connector. No Pull force: 49N max. applied in each of the 3 axis. 19. Lock strength physical damage or electrical failure. No electrical discontinuity of 10 µ sec. max. Contact Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 2 hours, 10. Shock 3 axis. resistance: 100m ø max. Note: Includes temperature rise caused by current flow. No electrical discontinuity of 10 µ sec. max. Contact resistance: 100m ø max. 16. Shock ■Materials ● Receptacles and cradles Component Material Finish Remarks Insulator Thermoplastic compound, glass reinforced Color: Black UL94V-0 Contacts Copper alloy Contact area: Gold plated ------------------- Shield Stainless steel Tin alloy plating ------------------- ● Plugs Component Material Finish Remarks Insulator Thermoplastic compound, glass reinforced Color: Black UL94V-0 Contacts Copper alloy Contact area: Gold plated ------------------- Shield Stainless steel ------------------- ------------------- Cover Thermoplastic compound, glass reinforced ------------------- UL94-HB ■Ordering information 1 Series name 2 Termination type ● Receptacles ST 60 - 18 P /4 1 2 4 5 3 6 4 5 ● Plugs ST 40 X - 18 S - CVR 1 2 3 4 5 ST 80 X - 18 S 2 2 3 6 7 ● Plug - Cradle type 1 7 4 5 : ST 60 : Right angle SMT 40 : Solder type 80 : Cradle, vertical, SMT Shield X : With shield Blank : Without shield Number of positions Contact type P : Male contact (Receptacle) S : Female contact (Plug) Contact arrangement /4 : Combination, with 4 power contacts Plug type CV : Standard type, for top PCB mount CVR : Reverse type, for bottom PCB mount CV1 : For larger diameter cables ■Receptacle BRecommended PCB ● 10 pos. mounting pattern 4.5 0.5 3.1 1.6 (0.58) 10.1 :Copper foil + plating resist :Land No.10 (4) 3 Packaging PCB edge 0.95 ST60 0.3 CL241-0022-5 Reel packaging (1500 pieces/reel) 0.75 ST60-10P CL No. 0.6 (Through hole) 1 0.4 4(Land) 9.2 Part Number 2.8 1.9 R0 R0 .3 .85 4 R0. 6.4 7 3.1 2.7 1.6 0.18 (11.5) No.1 0.3(Land) 2.65 1.9 10.5 4.5 0.5 1.5 (4.4) 10.1 ● 18 pos. BRecommended PCB mounting pattern 8.5 0.5 R0 .3 2.7 R0. 85 0.9 3.1 6.9 7.5 (0.58) 15.5 (4) 3 Packaging 14.1 CL241-0011-9 Reel packaging (1500 pieces/reel) 0.3 1.5 4.4 0.75 ST60-18P CL No. 1.9(Land) 14.1 No.18 ST60 Part Number PCB edge 0.6(Through hole) 1 6.6(Land) 13.2 No.1 0.3(Land) 2 2.8 3.6 1.6 1.9 14.5 8.5 0.5 0.18 ● 18 pos. with 4 power contacts BRecommended PCB mounting pattern Packaging ST60-18P/4 CL241-0005-6 Reel packaging (1000 pieces/reel) ST60 0.3 14.1 0.8 2 2.8 3.6 1 6.6(Land) 14.1 0.9 3.6 3.1 2 2.7 1.6 R R0 0.3 1.9 .85 (0.58) 0.8(Land) PCB edge 0.6(Through hole) 1.9(Land) (4.7) 4.8 4 1.76 CL No. (15.5) 24 21.6 16.6 14.5 13.2 No.1 No.18 10.45 7.95 8.5 0.3 0.5 (Land) 0.4 3 0.75 3.6 Part Number 11.15 8.65 6.2 6.9 7.5 1.5 11.15 10.45 8.65 7.95 8.5 0.5 0.18 1.5 4.4 3 ● 24 pos. BRecommended PCB mounting pattern 16.2 No.1 ST60 Packaging 17.1 CL241-0003-0 Reel packaging (1500 pieces/reel) 2 2.8 3.6 No.24 0.3 1.5 4.4 0.75 ST60-24P CL No. 9.6(Land) 17.1 PCB edge 0.6(Through hole) 1.9(Land) (4) 3 Part Number 1 R0 (0.58) (18.5) 11.5 0.5 0.3(Land) 3.1 R0 2.71.6 . .85 3 1.9 0.18 6.9 7.5 0.5 0.9 17.5 11.5 ● 36 pos. BRecommended PCB 0.18 2.45(Land) 9.25 24.6 (4.06) 3 ST60 1.5 5 0.3 CL241-0033-1 Reel packaging (1500 pieces/reel) 24.6 1.45 0.75 ST60-36P Packaging 0.7(Through hole) 2(Land) No.36 No.1 CL No. PCB edge (0.58) (26) 23.5 Part Number 19 2 0.35(Land) 1.8 2.35 3.65 R0 .35 3.25 R1 1.7 2.1 0.5 7 7.5 0.5 25 19 2 3.05 mounting pattern ● 36 pos. reverse type BRecommended PCB 2.45(Land) 9.25 24.6 (0.58) (26) 23.5 No.36 CL No. Packaging ST60-36PR CL241-0036-0 Reel packaging (1500 pieces/reel) 4 ST60 24.6 0.3 1.5 5 0.75 Part Number (4.06) 3 No.1 3.05 19 2 0.35(Land) 1.8 2.35 1.7 2.1 3.65 R0 .35 3.25 R1 0.18 7 7.5 0.5 25 19 2 0.5 1.45 mounting pattern PCB edge 0.7(Through hole) 2(Land) ■Plug – cradle type(Horizontal) ● 18 pos. 13.78 BRecommended PCB mounting pattern 3.575 3.85(max) 1.75 0.9 P=0.5 .75 R0 Connector positioning PCB edge ho ( .5 11.6 1.45(Land) .72 0.75 2.95 (R0 1.7 3.1 2.5 Ø1 ST60X-18S CL241-0028-1 Reel packaging (900 pieces/reel) 0.15 0.5 8.5 15.55 14.5 ) 25 0.4 R ( 8.5 0.32(Land) 7.95(min) 0.85(Through hole) Packaging 0.05 1.8 1.5(hole) Ø1 .3 1.25 2.25 CL No. 0.9 1.35 Part Number 0.25 3.575 1.475 1.5 3.05 9.05 (13.65) 0.25 11.6 15.55 1.375 15.8 No.1 No.18 5) 1.475 17 le) 14.5 1.5 0.25 4.475 0.5 26 24.95 1.5 0.5 19 2 0.32(Land) Connector positioning 3.1 2.5 PCB edge 22.05 7.75(min) 0.85(Through hole) 1.45(Land) 19 24.95 0.9 4.475 ST60X-36S CL241-0035-7 Reel packaging (900 pieces/reel) 0.15 2.1 le) 0.05 Packaging .7( ho CL No. mounting pattern Ø1 Part Number BRecommended PCB 1.25 3.55(max) Ø1 .3 0.9 1.4 9.05 (13.65) 0.25 22.05 26 1.475 0.75 No.1 1.475 No.36 1.375 24.25 27.5 (2.95) ● 36 pos. 5 ■Plug – cradle type(Vertical) BRecommended PCB 11.3 1.5 Part Number CL No. Packaging No.10 2.62.6 1.15 9.6 2.6 2.6 4 0.25 6 No.2 1 1.75 1 1.75 R0.5 R0.3 2.1 2.5 10.3 11.2 0.6(Through hole) 1(Land) 0.15 No.9 No.10 ST80 7.8 5.5 0.2 Ø1.3 2.25 1 2.4 2 8.8 4.8 16 11.2 4 No.1 No.1 11.3 4 2.25 1 R0.45 0.5 R0.25 (Land) Ø1.6(hole) 0.5(Through hole) 0.9(Land) mounting pattern 2 ● 10 pos. 4 ST80X-10S CL241-0030-3 Reel packaging (400 pieces/reel) 1.5 10.3 ● 18 pos. BRecommended PCB mounting pattern 14.9 1.5 14.9 8 0.9(Land) 0.5(Through hole) 7.8 6 1.6 8.8 2.875 Ø1.3 0.15 2.825 0.25 2.875 R2 .1 1.1 9.6 1.5 2 2.4 1 4.25 8 13.6 14.2 25.7 45 25 Packaging 5.5 R0. R0. 1.1 ST80 CL No. No.1 1 4.25 8 e) ol (h 5 .5 Ø1 3.75 1 le) ho .5( Ø4 (18) 27.6 25.7 8 3.75 1 0.2 No.18 No.18 No.2 No.1 Part Number 2.825 0.5(Land) No.17 2 ST80X-18S CL241-0020-0 Reel packaging (400 pieces/reel) 1.5 13.6 14.2 ● 24 pos. 17.2 1.5 17.2 11 2.4 2 0.75 R0.2 5 R0 .4 5 mounting pattern ) le ho 6( . Ø1 0.5(Land) 5.25 1 No.1 A 11 R1.8 No.23 9.6 1.6 4.15 5.6 1 5.75 A 1.25 6 1.5 16.2 17.2 1.15 1.25 4.15 2.6 0.15 0.6(Through hole) Ø1.3 6 9.6 0.25 Packaging ST80X-24S CL241-0037-2 Reel packaging (400 pieces/reel) 6 7.8 CL No. ST80 Part Number No.24 No.24 2.1 2.5 1 5.75 11 9.6 16.2 17.2 27 le) (ho Ø4 .5 3 R0 R0. (20.7) 29.9 27 11 5.25 1 0.2 No.2 No.1 1(Land) 4.8 8.8 A 0.5(Through hole) 0.75 0.9(Land) BRecommended PCB ■Plug ● 10 pos. (Non-shielded type, for 4mm max. cable diameter) 7 18 19.5 16 screw(2) 6 Catch / release button(2) 16 Part Number CL No. ST40-10S-CV CL241-0021-2 No.1 No.10 ● 10 pos. (Reverse, non-shielded type, for 4mm max. cable diameter) 7 18 19.5 16 6 Catch / release button(2) 16 Part Number CL No. ST40-10S-CVR CL241-0040-7 No.1 No.10 ● 10 pos. (Shielded type, for 4mm max. cable diameter) 7 18 19.5 16 screw(2) 6 Catch / release button(2) 16 Part Number CL No. ST40X-10S-CV CL241-0041-0 No.1 No.10 ● 10 pos. (Reverse, shielded type, for 4mm max. cable diameter) 7 18 Catch / release button(2) 6 19.5 16 16 Part Number CL No. ST40X-10S-CVR CL241-0029-4 No.10 No.1 7 ● 18 pos. (Shielded type, for 4mm max. cable diameter) 18 7 20.5 20 screw(2) 5.5 Catch / release button(2) 18 Part Number CL No. ST40X-18S-CV CL241-0012-1 No.1 No.18 ● 18 pos. (Reverse, shielded type, for 4mm max. cable diameter) 7 20.5 20 18 5.5 Catch / release button(2) 18 Part Number CL No. ST40X-18S-CVR CL241-0016-2 No.1 No.18 ● 4 pos. (For opening size as 18 pos., reverse, non-shielded, for 4mm max. cable diameter) 7 20.5 20 18 5.5 Catch / release button(2) 18 Part Number CL No. ST40-18(4)S-CVR CL241-0032-9 No.13 No.9 No.5 No.1 ● 24 pos. (Shielded type, for 4mm max. cable diameter) 21 7 23.2 5.5 20 screw(2) 21 8 Part Number CL No. ST40X-24S-CV CL241-0004-3 No.24 No.1 Catch / release button(2) ● 24 pos. (Shielded type, for 5.8mm max. cable diameter) 23.2 screw(2) 20.1 (10) 9 (10) 21 5.5 Catch / release button(2) 21 Part Number CL No. ST40X-24S-CV1 CL241-0023-8 No.1 No.24 ● 36 pos. (Shielded type, for 7mm max. cable diameter) 30.6 11.4 34.1 29 screw(2) 6.7 Catch / release button(2) 32.5 Part Number CL No. ST40-36S-CV CL241-0034-4 No.36 7.6 No.1 Note: Plug assemblies will require additional components. Contact Hirose Electric representative for detailed descriptions and installation instructions. 9 BPackaging Specification ● Embossed Carrier Tape Dimensions Unreeling direction D 1.75 A E B C .5 Ø1 4 2 ● Reel Dimensions Pocket (13) (Ø382) Unreeling direction ● Reel Dimensions Part Number 10 A B C D E pcs. / reel ST60-10P 24 ----- 11.5 12 00.5 1500 ST60-18P 24 ----- 11.5 12 00.5 1500 ST60-24P 32 28.4 14.2 12 00.5 1500 ST60-36P 44 40.4 20.2 12 00.5 1500 ST60-18P/4 44 40.4 20.2 12 06.2 1000 ST60-36PR 44 40.4 20.2 12 00.5 1500 ST80X-10S 24 ----- 11.5 16 12.2 0400 ST80X-18S 44 40.4 20.2 16 12.7 0400 ST80X-24S 44 40.4 20.2 16 12.7 0400 ST60X-18S 32 28.4 14.2 20 4.95 0900 ST60X-36S 44 40.4 20.2 20 4.85 0900 BRecommended Temperature Profile (Lead-free soldering compound) (ç) HRS test conditions 240ç 230ç min 250 200 180ç 150 150ç Solder composition: Paste, 96.5%Sn/3.0%Ag/0.5%Cu Test board: Glass epoxy 35mm∞35mm∞0.8mm thick The temperature profiles are based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board 100 60S 50 30S size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. 11