MCC GP02-35 THRU GP02-60 omponents 21201 Itasca Street Chatsworth !"# $ % !"# Features • • • • AVALANCHE OPERATION UL 94V0 FLAME RETARDANT EPOXY MOLDING COMPOND BEVELED ROUND CHIP LOW COST 0.2 Amp High Voltage Silicon Rectifier 3500 - 6000 Volts Maximum Ratings • • • DO-15 Operating J unct ion Temperature -55 °C to +125 °C Storage Temperature: - 55°C to +150°C Maximum Thermal Resistance : 50°C/W Junction To Ambinet (NOTE1) Microsemi Catalog Number GP02-35 GP02-40 GP02-50 GP02-60 Device Marking GP02-35 GP02-40 GP02-50 GP02-60 Maximum Recurrent Peak Reverse Voltage 3500V 4000V 5000V 6000V Maximum RMS Voltage Maximum DC Blocking Voltage 2450V 2800V 3500V 4200V 3500V 4000V 5000V 6000V D A Cathode Mark B D Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current GP02-35~40 GP02-50~60 Maximum Instantaneous Forward Voltage GP02-35~40 GP02-50~60 Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance GP02-35~40 GP02-50~60 IF(AV) 0.2A TA = 55 °C C 25 A 20 A 8.3ms, half sine 5.0 V 7.0 V IFM = 0.2A; TJ = 25°C IR 5.0 µA 50 µA TA = 25°C TA = 100°C CJ 7 pF 5 pF Measured at 1.0MHz, VR=4.0V IFSM DIMENSIONS VF DIM A B C D INCHES MIN .230 .104 .026 1.000 NOTE: 1. BOTH LEADS ATTATCHED TO HEATSINK 20* 20* 1t(mm) COPPER PLATE AT LEAD LENTH 5mm www.mccsemi.com MAX .300 .140 .034 --- MM MIN 5.80 2.60 .70 25.40 MAX 7.60 3.60 .90 --- NOTE MCC GP02-35 THRU GP02-60 RATINGS AND CHARACTERISTICS CURVES IO-PERCENT OF AVERAGE RECTIFIED CURRENT (%) FIG. 1 MAXIMUM CURRENT RATING EFFECT OF COPPER AREA. RESISTIVE/INDUCTIVE LOAD A=20□mm 100 □ A=10 mm 80 □ A=5.5 mm 60 10mm 10mm 40 20 COPPER AREA 5.5!mm 0 0 20 40 PC BOARD 60 80 100 120 140 IO-PERCENT OF AVERAGE RECTIFIED CURRENT (%) FIG. 2 MAXIMUM CURRENT RATING CAPACITIVE LOAD, 10mm LEAD LENGTHS PK AV RESISTIVE/INDUCTIVE LOADS 100 5 80 CAPACTIVE LOADS 10 20 60 10mm 40 10mm 20 COPPER AREA 5.5!mm 0 0 20 PC BOARD 40 60 80 100 120 140 160 INSTANTANEOUS REVERSE CURRENT MICROAMPERES TA-AMBIENT TENMPERATURE (℃ ℃) FIG. 4TYPICAL REVERSE CHARCTERISTICS ℃ AT TJ=25℃ 10 1.0 0.1 .01 0 20 L=5mm L=10mm 80 L=20mm 60 10mm 10mm 40 20 COPPER AREA 5.5!mm 0 0 20 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE FIG. 3 MAXIMUM CURRENT RATING EFFECT OF COPPER AREA. RESISTIVE/INDUCTIVE LOAD 100 40 PC BOARD 40 60 80 100 120 140 160 TA-AMBIENT TENMPERATURE (℃ ℃) www.mccsemi.com MCC FORWARD SURGE CURRENT, AMPERES PK (HALF SINE-WAVE) GP02-35 THRU GP02-60 RATINGS AND CHARACTERISTICS CURVES FIG. 5 MAXIMUM FORWARD SURGE VS NUMBER OF CYCLES 30 24 GP02-35~40 18 12 6 GP02-50~60 0 1 10 100 NO. OF CYCLES AT 60HZ CJ-JUNCTION CAPACITANCE (PF) FIG. 6 TYPICAL JUNCTION CAPACITANCE 10 0 GP02-35~40 1 0 GP02-50~60 1 10 100 1000 VR-REVERSE VOLAGE (V) IF-FORWARD CURRENT (A) FIG. 7 TYPICAL FORWARD CHARACTERISTICS 1 0.1 GP02-35~40 0.01 GP02-45~60 0.001 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 VF-FORWARD VOLAGE (V) www.mccsemi.com