MITSUBISHI FU-445SDF

TZ7-01-123B (1/6)
June 20, 2001
Approved
Approved
Charged
H.Koyanagi
Specification of uncooled DFB-LD module
Module type: FU-445SDF-x1Mxx
( Mitsubishi standard product )
A
B
x
Date
20.Jun.’01
C
D
Approved
Y.Hozumi
MITSUBISHI ELECTRIC CORPORATION
* Mitsubishi Electric Corp. reserves the right to change product design and specification without notice.
TZ7-01-123B (2/6)
MITSUBISHI (OPTICAL DEVICES)
FU-445SDF-x1Mxx
1.3 µ m UNCOOLED DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
(BIAS CIRCUIT INTEGRATED, DIGITAL APPLICATION)
DESCRIPTION
Module type FU-445SDF-x1Mxx is a 1.3µm Uncooled
DFB-LD module with single-mode optical fiber.
This module is suitable to a light source for use in
2.5Gb/s digital optical communication systems.
FEATURES
l λ/4 shifted Multi quantum wells (MQW) DFB
Laser Diode module
l Input impedance is 25Ω
l Emission wavelength is in 1.3 µm band
l High-speed response
l Built-in optical isolator
l Built-in thermistor and bias T
l 8-pin Mini-DIL package with Gull wing leads
l With photodiode for optical output monitor
APPLICATION
High speed transmission systems (~2.5Gb/s)
ABSOLUTE MAXIMUM RATINGS (Tc=25°C)
Parameter
Symbol
Laser diode
Optical output
Pf
power
Forward current
If
Reverse voltage
Vrl
Photodiode
Reverse voltage
Vrd
Forward current
Ifd
Operating case temperature
Tc
Storage temperature
Tstg
Conditions
CW
Rating
6
Unit
mW
CW
-
100
2
20
2
-20 ~ +85
-40 ~ +85
mA
V
V
mA
°C
°C
TZ7-01-123B (3/6)
MITSUBISHI (OPTICAL DEVICES)
FU-445SDF-x1Mxx
1.3 µ m UNCOOLED DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
(BIAS CIRCUIT INTEGRATED, DIGITAL APPLICATION)
ELECTRICAL/OPTICAL CHARACTERISTICS (Tc=-20~85°C, unless otherwise noted)
Parameter
Symbol
Test Conditions
Limits
Unit
Min.
Typ.
Max.
Threshold current
Ith
CW, Tc=25°C
10
25
mA
CW
2
40
µW
Optical output power
Pth
CW, Ibias=Ith
50
at threshold current
Operating current
Iop
CW, Pf=2mW, Tc=25°C
40
70
mA
CW, Pf=2mW, Tc=85°C
60
90
Operating voltage
Vop
CW, Pf=2mW, Tc=25°C
1.2
1.5
V
CW, Pf=2mW, Tc=85°C
1.6
1.8
Ω
Input impedance
Zin
25
Optical output power from
Pf
CW, nominal
2
mW
fiber end
λc
Light-emission central
CW, Pf=1mW
1290
1310
1330
nm
wavelength
λct
Wavelength temperature
0.09
0.1
nm/°C
coefficient
∆λ
Spectral width
(Note1), -20dB
0.8
nm
Side mode suppression ratio
Sr
(Note1)
30
45
dB
Cutoff frequency
fc
Pf=1mW
3.5
GHz
(-1.5dB optical)
Rise and fall time (10~90%)
tr, tf
(Note1)
125
150
psec
Dispersion penalty
Pp
(Note1), -300ps/nm disp.
0.5
dB
Relative intensity noise
Nr
CW, Pf=1mW, f=1GHz
-145
-130
dB/Hz
Tracking error (Note 2)
Er
CW, APC(Imon=const.)
0.5
1.25
dB
η
Differential efficiency
CW, Tc=25°C
0.06
0.2
mW/
mA
CW
0.04
0.27
Monitor current
Imon
CW, Pf=1mW, Vrd=5V
0.05
1
mA
Optical isolation
Iso
20
dB
µA
Dark current (PD)
Id
Vrd=5V
0.1
Capacitance (PD)
Ct
Vrd=5V, f=1MHz
10
pF
Thermistor resistance
Rth
Tc=25°C
9.5
10
10.5
kΩ
B constant of Rth
B
3950
K
23
Note 1) 2.48832Gb/s NRZ, 2 -1, Pf_ave=1mW, Ibias=Ith, optical return loss from the line should be greater
than 24dB in order to ensure the specified performance.
Note 2) Er=max|10×log(Pf / Pf@25°C)|
FIBER PIGTAIL SPECIFICATIONS
Parameter
Type
Mode field diameter
Cladding diameter
Secondary coating outer diameter
Connector
Optical return loss of connector
Limits
SM
9.3 ± 1
125± 2
0.9 ± 0.1
See Table 1.
40 (min)
Unit
µm
µm
mm
dB
TZ7-01-123B (4/6)
MITSUBISHI (OPTICAL DEVICES)
FU-445SDF-x1Mxx
1.3 µ m UNCOOLED DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
(BIAS CIRCUIT INTEGRATED, DIGITAL APPLICATION)
DOCUMENTATION
• Threshold current (Ith) at Tc=25, 85°C
• Operating current (Iop) at Tc=25, 85°C
• Operating voltage (Vop) at Tc=25°C
• Light-emission central wavelength (λc) at Tc=25°C
• Monitor current (Imon) at Tc=25°C
• Optical output power from fiber end (Pf)
Table 1.
Type number
Connector type
L (Note 3)
Outline diagram
FU-445SDF-1M1C
None (Note 4)
FU-445SDF-V1M1C
FC/PC
28.4
(1)
FU-445SDF-W1M1C
SC/PC
34.5
FU-445SDF-1M2B
None (Note 4)
FU-445SDF-V1M2B
FC/PC
28.4
(2)
FU-445SDF-W1M2B
SC/PC
34.5
Note 3) ‘L’ is defined in OUTLINE DIAGRAMs.
Note 4) There are some cases where a connector for testing is shipped with the product.
Then the fiber length not including the connector is more than 1000mm.
TZ7-01-123B (5/6)
MITSUBISHI (OPTICAL DEVICES)
FU-445SDF-x1Mxx
1.3 µ m UNCOOLED DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
(BIAS CIRCUIT INTEGRATED, DIGITAL APPLICATION)
OUTLINE DIAGRAM (1)
(Unit : mm)
3
2
1
← Pin No.
Thermistor
4
PD
19Ω
LD
TOP VIEW
5
6
7
8
FU-445SDF-x1M1C
PIN
1
2
3
4
5
6
7
8
FUNCTION
THERMISTOR
THERMISTER
LD BIAS, CATHODE
PD CATHODE
PD ANODE
LD ANODE
LD RF, CATHODE
LD ANODE
TZ7-01-123B (6/6)
MITSUBISHI (OPTICAL DEVICES)
FU-445SDF-x1Mxx
1.3 µ m UNCOOLED DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
(BIAS CIRCUIT INTEGRATED, DIGITAL APPLICATION)
OUTLINE DIAGRAM (2)
(Unit : mm)
3
2
1
← Pin No.
Thermistor
4
PD
19Ω
LD
TOP VIEW
5
6
7
8
FU-445SDF-x1M2B
PIN
1
2
3
4
5
6
7
8
FUNCTION
THERMISTOR
THERMISTER
LD BIAS, CATHODE
PD CATHODE
PD ANODE
LD ANODE
LD RF, CATHODE
LD ANODE