RM35HG-34S B F D A G - DIA. K L H C J Description: Mitsubishi Super Fast Recovery Diodes are designed for use in applications requiring fast switching. Features: 2 1 3 u Non-Isolated Package M N E u Planar Chips u trr = 300ns Max. E Applications: u Snubber Circuits 1 3 Ordering Information: Example: Select the complete part number from the table below -i.e. RM35HG-34S is a 1700V, 35 Ampere Super Fast Recovery Single Diode Module. 2 4 Outline Drawing and Circuit Diagram Dimension Inches Millimeters Dimension Inches Millimeters A 1.102±0.02 26.0±0.5 H 0.12±0.012 3.0±0.3 B 0.81 Max. 20.5 Max. J 0.10±0.012 2.5±0.3 C 0.79 Min. 20.0 Min. K 0.10 2.5 D 0.24±0.008 6.0±0.2 L 0.08±0.012 2.0±0.3 E 0.214±0.012 5.45±0.3 M 0.04±0.008 1.0±0.2 0.20±0.012 5.0±0.3 N 0.02±0.008 0.6±0.2 F G Type Current Rating Amperes Voltage Volts (x 50) RM 35 34 0.214±0.012 Dia. Dia. 3.2±0.2 Sep.1998 RM35HG-34S Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Ratings Symbol RM35HG-34S Units Peak Reverse Blocking Voltage (Non-Repetitive) VRRM 1700 Volts DC Reverse Blocking Voltage VR(DC) 1360 Volts DC Current, TC = 80°C (Resistive Load) IF(DC) 35 Amperes Peak Half-Cycle Surge (Non-Repetitive) On-State Current (60Hz) IFSM 400 Amperes I2t — A2sec Tstg -40 to +125 °C Tj -40 to +150 °C Maximum Mounting Torque M3 Mounting Screw — 0.59 ~ 0.98 N·m Module Weight (Typical) — 10 Grams I2t for Fusing, (8.3 milliseconds) Storage Temperature Operating Temperature Electrical and Thermal Characteristics, T j = 25°C unless otherwise specified Characteristics Symbol Test Conditions Max. Units IRRM VRRM applied, Tj = 150°C 1.0 mA VRRM applied, Tj = 25°C 0.1 mA VFM Tj = 25°C, IFM = 100A 5.0 Volts trr Tj = 25°C, IFM = 100A 0.3 µs Blocking State Maximums Reverse Leakage Current, Peak Conducting State Maximums Forward Voltage Drop Switching Minimums Reverse Recovery Time di/dt = -500A/µs, VR = 600V Lead Integrity — Tension Load: 2.5 kg 30.0 s — Bending Load: 1 kg bent to 90° 2.0 times Junction to Case Thermal Resistance Rth(j-c) Junction to case 0.5 °C/Watt Contact Thermal Resistance Rth(c-f) Case to Fin, Thermal Grease Applied 0.5 °C/Watt Thermal Maximums *Maximum ratings unless otherwise specified Sep.1998