RM50HG-12S Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Super Fast Recovery Single Diode 50 Amperes/600 Volts B Description: Powerex Super Fast Recovery Diodes are designed for use in applications requiring fast switching. F D G - DIA. Features: A M Non-Isolated Package K M Planar Chips L 2 1 H C J 3 M N E E 1 3 RM50HG-12S Super Fast Recovery Single Diode 50 Amperes/600 Volts M trr = 200 ns Max. Applications: M Snubber Circuits M Switching Power Supplies 2 4 M Free Wheeling Outline Drawing Dimension Inches A 1.02±0.02 26.0±0.5 B 0.81 Max. 20.5 Max. C 0.79 Min. 20.0 Min. D 0.24±0.008 6.0±0.2 E 0.214±0.012 5.45±0.3 F 0.20±0.012 5.0±0.3 G Millimeters Type Current Rating Amperes Voltage Volts (x50) RM 50 12 0.214±0.012 Dia. Dia. 3.2±0.2 H 0.12±0.012 3.0±0.3 J 0.10±0.012 2.5±0.3 K Ordering Information: Select the complete eight digit part number you desire from the table below. Example: RM50HG-12S is a 600 Volt, 50 Ampere Super Fast Recovery Single Diode. 0.10 2.5 L 0.08±0.012 2.0±0.3 M 0.04±0.008 1.0±0.2 N 0.02±0.008 0.6±0.2 D-3 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 RM50HG-12S Super Fast Recovery Single Diode 50 Amperes/600 Volts Absolute Maximum Ratings Characteristics Symbol Conditions Peak Forward Blocking Voltage VDRM VRRM — 600 Volts — — 720 Volts 480 Volts Peak Reverse Blocking Voltage (Non-Repetitive) DC Reverse Blocking Voltage VR(DC) IF(DC) DC Current, TC = 80°C (Resistive Load) RM50HG-12S Units — 50 Amperes — 1000 Amperes — — A2sec TSTG Tj — -40 to 125 °C — -40 to 150 Maximum Mounting Torque M3 Mounting Screw — — 10 Weight (Typical) — — 10 Peak Half-Cycle Surge (Non-Repetitive) On-State Current (60Hz) I2t for Fusing, (8.3 milliseconds) Storage Temperature Operating Temperature IFSM I2t °C kg.-cm. Grams Electrical and Thermal Characteristics, Tj = 25°C unless otherwise specified Characteristics Blocking State Maximums Reverse Leakage Current, Peak Conducting State Maximums Forward Voltage Drop Switching Minimums Reverse Recovery Time Reverse Recovery Charge Symbol IRRM Test Conditions RM50HG-12S VRRM applied, Tj = 150°C VRRM applied, Tj = 25°C VFM Tj = 25°C, IFM = 200A trr Qrr Tj = 25°C, IFM = 100A di/dt = -1000A/ms, VR = 300V — Tension Load: 25 kg — Bending Load: 1 kg bent to 90° Ru(J-C) Ru(C-S) Case to Fin, Thermal Grease Applied 1.0 0.1 4.0 0.2 — Units mA mA Volts ms mC Lead Integrity Thermal Maximums Thermal Resistance, Junction-to-Case Contact Thermal Resistance, Case-to-Fin *Maximum ratings unless otherwise specified D-4 Diode 30.0 2.0 s times 0.5 °C/Watt 0.5 °C/Watt