QRS4506002 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Single Discrete Diode 60 Amperes/4500 Volts A C N D F G B A (3) H J NC (2) K (BASE) A (1) K R A (3) Description: Powerex Single Non-isolated Discrete is designed specially for customer high voltage applications. K (BASE) Features: L E M A (1) NC (2) Q P Non-Isolated Package Molybdenum Mounting Plate Surface Mount Design Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 2.35 59.7 B 0.98 25.0 C 1.98 50.3 D 0.197 E 0.22 F 0.22 5.6 G 0.465 11.8 H 0.27 6.9 01/10 Rev. 3 Dimensions Inches Millimeters J 0.93 23.6 K 0.14 3.6 L 0.20 5.2 5.0 M 0.40 1.0 5.5 N 0.43 11.0 P 0.20 0.5 Q 0.12 3.0 R 0.208 Dia. 5.3 Dia. Applications: Snubber Circuits Free Wheeling Switching Power Supplies 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com QRS4506002 Single Discrete Diode 60 Amperes/4500 Volts Maximum Ratings, Tj = 25 °C unless otherwise specified Ratings Symbol QRS4506002 Units Peak Reverse Blocking Voltage VRRM 4500 Volts Average Current (DC, TC = 94°C) VF(avg) 60 Amperes IFSM 120 Amperes I2t (for Fusing) (8.3 milliseconds) I2t 1900 A2sec Operating Temperature Tj -55 to 150 °C Peak 3-Cycle Surge (Non-Repetitive) On-State Current (60 Hz) Storage Temperature Tstg -55 to 125 °C Mounting Torque, M5 Mounting Screws — 30 in-lb Weight (Typical) — 21 Grams Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Reverse Leakage Current (Peak) IRRM Vrrm = 4500V — — 1.0 mA Peak On-State Voltage VFM IFM = 60A — 5.6 6.2 Volts Reverse Recovery Time trr IFM = 67A, di/dt = -800A/µS, Vr = ½VRM — 230 — nS Reverse Recovery Charge Qrr IFM = 67A, di/dt = -800A/µS, Vr = ½VRM — 11 — µC Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Thermal Resistance, Junction to Case Rth(j-c) Diode — 0.15 TBD °C/W Thermal Resistance, Case to Sink Rth(c-s) λgrease = 1W/mK — 0.10 — °C/W Thermal Grease Applied REVERSE RECOVERY CHARACTERISTICS (TYPICAL) 30 6 5 4 3 2 1 0 25 50 75 IFM, (AMPERES) 2 100 125 101 VCC = 2250V LS = 180nH Tj = 125°C 25 REVERSE RECOVERY TIME, trr, (µs) Tj = 25°C Tj = 125°C REVERSE RECOVERY ENERGY, Erec, (mJ/P) EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) 7 REVERSE RECOVERY CHARACTERISTICS (TYPICAL) 20 15 10 5 0 0 25 50 IFM, (AMPERES) 75 100 103 VCC = 2250V di/dt = 100A/µs Tj = 125°C INDUCTIVE LOAD 100 trr 102 Irr 10-1 101 102 REVERSE RECOVERY CURRENT, Irr, (AMPERES) FORWARD CHARACTERISTICS (TYPICAL) 101 103 IFM, (AMPERES) 01/10 Rev. 3