MOTOROLA MAC229-8

MOTOROLA
Order this document
by MAC229/D
SEMICONDUCTOR TECHNICAL DATA
MAC229
Series
MAC229A
Series
Triacs
Silicon Bidirectional Triode Thyristors
. . . designed primarily for industrial and consumer applications for full wave control of
ac loads such as appliance controls, heater controls, motor controls, and other power
switching applications.
TRIACs
8 AMPERES RMS
200 thru 800 VOLTS
• All Diffused and Glass-Passivated Junctions for Parameter Uniformity and
Stability
• Small, Rugged, Thermowatt Construction for Low Thermal resistance and High
Heat Dissipation
• Center Gate Geometry for Uniform Current Spreading
• Gate Triggering Guaranteed in Three Modes (MAC229 Series) or Four Modes
(MAC229A Series)
MT2
MT1
G
CASE 221A-04
(TO-220AB)
STYLE 4
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.)
Rating
Peak Repetitive Off-State Voltage(1)
(TJ = –40 to 110°C
1/2 Sine ave 50 to 60 Hz, Gate Open)
MAC229-4, MAC229A4
MAC229-6, MAC229A6
MAC229-8, MAC229A8
MAC229-10, MAC229A10
On-State RMS Current (TC = 80°C)
Full Cycle Sine Wave 50 to 60 Hz
Peak Non–repetitive Surge Current
(One Full Cycle 60 Hz, TJ = 110°C)
Circuit Fusing
(t = 8.3 ms)
p 2 µs)
Peak Gate Voltage (t p 2 µs)
Peak Gate Power (t p 2 µs)
Peak Gate Current (t
Average Gate Power
(TC = 80°C, t
8.3 ms)
p
Operating Junction Temperature Range
Storage Temperature Range
Mounting Torque
Symbol
Value
VDRM
Volts
200
400
600
800
IT(RMS)
8
Amps
ITSM
80
Amps
I2t
26
A2s
IGM
±2
Amps
VGM
±10
Volts
PGM
20
Watts
PG(AV)
0.5
Watts
TJ
–40 to 110
°C
Tstg
–40 to 150
°C
8
in. lb.
1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source
such that the voltage ratings of the devices are exceeded.
Motorola Thyristor Device Data
 Motorola, Inc. 1995
Unit
(cont.)
1
THERMAL CHARACTERISTICS
Symbol
Max
Unit
Thermal Resistance, Junction to Case
Characteristic
RθJC
2.2
°C/W
Thermal Resistance, Junction to Ambient
RθJA
60
°C/W
ELECTRICAL CHARACTERISTICS (TC = 25°C and either polarity of MT2 to MT1 voltage unless otherwise noted.)
Characteristic
Peak Blocking Current(1)
(VD = Rated VDRM, Gate Open)
Peak On-State Voltage
(ITM = 11 A Peak, Pulse Width
Symbol
Min
Typ
Max
Unit
—
—
—
—
10
2
µA
mA
—
—
1.8
Volts
IDRM
TJ = 25°C
TJ = 110°C
VTM
p 2 ms, Duty Cycle p 2%)
Gate Trigger Current (Continuous dc)
(VD = 12 V, RL = 100 Ω)
MT2(+), G(+); MT2(+), G(–); MT2(–), G(–)
MT2(–), G(+) “A” SUFFIX ONLY
IGT
Gate Trigger Voltage (Continuous dc)
(VD = 12 V, RL = 100 Ω)
MT2(+), G(+); MT2(+), G(–); MT2(–), G(–)
MT2(–), G(+) “A” SUFFIX ONLY
(VD = Rated VDRM, TC = 110°C, RL = 10 k)
MT2(+), G(+); MT2(+), G(–); MT2(–), G(–);
MT2(–), G(+) “A” SUFFIX ONLY
VGT
mA
—
—
—
—
10
15
Volts
All Types
MAC229 series
—
—
—
—
2
2.5
0.2
0.2
—
—
—
—
Holding Current
(VD = 12 Vdc, ITM = 200 mA, Gate Open)
IH
—
—
15
mA
Gate-Controlled Turn-On Time
(VD = Rated VDRM, ITM = 16 A Peak, IG = 30 mA)
tgt
—
1.5
—
µs
dv/dt
—
25
—
V/µs
dv/dt(c)
—
5
—
V/µs
Critical Rate of Rise of Off-State Voltage
(VD = Rated VDRM, Exponential Waveform, TC = 110°C)
Critical Rate of Rise of Commutation Voltage
(VD = Rated VDRM, ITM = 11.3 A,
Commutating di/dt = 4.1 A/ms, Gate Unenergized, TC = 80°C)
1. Ratings apply for open gate conditions. Devices shall not be tested with a constant current source for blocking voltage such that the voltage
applied exceeds the rated blocking voltage.
10
α = 30°
104
60°
90°
120°
180°
120°
98
α
92
α
86
α = CONDUCTION ANGLE
dc
80
dc
α = 180°
α
8.0
120°
α
90°
α = CONDUCTION ANGLE
6.0
TJ ≈ 110°
4.0
60°
30°
2.0
0
0
1.0
2.0
3.0
4.0
5.0
6.0
IT(RMS), RMS ON-STATE CURRENT (AMP)
2
P(AV), AVERAGE POWER (WATTS)
TC, CASE TEMPERATURE ( °C)
110
7.0
8.0
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
IT(RMS), RMS ON-STATE CURRENT (AMP)
Motorola Thyristor Device Data
PACKAGE DIMENSIONS
B
F
–T–
T
4
Q
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
SEATING
PLANE
C
S
A
1 2 3
H
K
STYLE 4:
PIN 1.
2.
3.
4.
U
Z
L
V
R
G
D
J
N
MAIN TERMINAL 1
MAIN TERMINAL 2
GATE
MAIN TERMINAL 2
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
INCHES
MIN
MAX
0.570
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.147
0.095
0.105
0.110
0.155
0.014
0.022
0.500
0.562
0.045
0.055
0.190
0.210
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
0.045
–––
–––
0.080
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.28
4.07
4.82
0.64
0.88
3.61
3.73
2.42
2.66
2.80
3.93
0.36
0.55
12.70
14.27
1.15
1.39
4.83
5.33
2.54
3.04
2.04
2.79
1.15
1.39
5.97
6.47
0.00
1.27
1.15
–––
–––
2.04
CASE 221A-04
(TO–220AB)
Motorola Thyristor Device Data
3
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
Literature Distribution Centers:
USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036.
EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England.
JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan.
ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
4
◊
Motorola Thyristor Device Data
*MAC229/D*
MAC229/D