Order this document by MRS1504T3/D SEMICONDUCTOR TECHNICAL DATA SMB Power Surface Mount Package STANDARD RECOVERY RECTIFIER 1.5 AMPERES 400 VOLTS Features mesa epitaxial construction with glass passivation. Ideally suited for high frequency switching power supplies; free wheeling diodes and polarity protection diodes. • Compact Package with J–Bend Leads Ideal for Automated Handling • Stable, High Temperature, Glass Passivated Junction Mechanical Characteristics: • Case: Molded Epoxy • Epoxy Meets UL94, VO at 1/8″ • Weight: 95 mg (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Maximum Temperature of 260°C / 10 Seconds for Soldering • Available in 12 mm Tape, 2500 Units per 13 inch Reel, Add “T3” Suffix to Part Number • Polarity: Notch in Plastic Body Indicates Cathode Lead • Marking: RGG CASE 403A–03 SMB MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 400 V Average Rectified Forward Current (At Rated VR, TI = 118°C) IO 1.5 A Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz, TI = 118°C) IFRM 3.0 A Non–Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) IFSM 50 A Tstg, TC –55 to 150 °C TJ –55 to 150 °C Rtjl Rtja 18 79 °C/W Storage / Operating Case Temperature Operating Junction Temperature THERMAL CHARACTERISTICS Thermal Resistance – Junction–to–Lead (2) Thermal Resistance – Junction–to–Ambient (on 1″ sq. Cu. PCB pattern) ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (1), see Figure 2 VF (IF = 1.5 A) (IF = 2.25 A) Maximum Instantaneous Reverse Current, see Figure 4 (VR = 400 V) (VR = 200 V) IR TJ = 25°C TJ = 100°C 1.04 1.10 0.96 1.02 TJ = 25°C TJ = 100°C 1.0 0.5 340 180 V mA (1) Pulse Test: Pulse Width ≤ 250 µs, Duty Cycle ≤ 2.0%. (2) Minimum pad size This document contains information on a new product. Specifications and information herein are subject to change without notice. REV 1 Device Rectifier Motorola, Inc. 1997 Data 1 100 100 10 TJ = 100°C TJ = 150°C 1.0 TJ = 25°C TJ = –40°C 0.1 0.6 0.8 1.0 1.4 1.2 1.6 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) MRS1504T3 TJ = 150°C TJ = 25°C 0.1 0.6 0.8 1.0 1.4 1.2 1.6 Figure 2. Maximum Forward Voltage 10E–3 10E–6 I R, MAXIMUM REVERSE CURRENT (AMPS) I R, REVERSE CURRENT (AMPS) 1.0 Figure 1. Typical Forward Voltage TJ = 150°C TJ = 100°C 100E–9 TJ = 25°C 10E–9 100 200 1.0E–6 TJ = 25°C 100E–9 10E–9 0 100 200 300 400 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Reverse Current Figure 4. Maximum Reverse Current PFO , AVERAGE POWER DISSIPATION (WATTS) 2.5 FREQ = 20 kHz dc 2.0 SQUARE WAVE 1.5 Ipk/Io = p 1.0 Ipk/Io = 5 0.5 Ipk/Io = 10 Ipk/Io = 20 0 20 TJ = 100°C 10E–6 400 300 TJ = 150°C 1.0E–3 100E–6 1.0E–6 0 I O , AVERAGE FORWARD CURRENT (AMPS) TJ = 100°C VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 1.0E–9 2 10 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 100E–6 0 100 40 60 80 100 120 140 160 2.5 dc 2.0 SQUARE WAVE Ipk/Io = p Ipk/Io = 5 1.5 Ipk/Io = 10 1.0 Ipk/Io = 20 0.5 0 0 0.5 1.0 1.5 2.0 TL, LEAD TEMPERATURE (°C) IO, AVERAGE FORWARD CURRENT (AMPS) Figure 5. Current Derating Figure 6. Forward Power Dissipation 2.5 Rectifier Device Data MRS1504T3 100 C, CAPACITANCE (pF) TJ = 25°C 10 1.0 0 10 20 30 40 50 60 70 80 VR, REVERSE VOLTAGE (VOLTS) R (T) , TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 7. Capacitance 1.0 50% 20% 10% 0.1 5.0% 2.0% 0.01 1.0% Rtjl(t) = Rtjl*r(t) 0.001 0.00001 0.0001 0.001 0.1 0.01 1.0 10 100 T, TIME (s) R (T) , TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 8. Thermal Response Junction to Lead 1.0 50% 20% 0.1 10% 5.0% 2.0% 0.01 1.0% Rtjl(t) = Rtjl*r(t) 0.001 0.00001 0.0001 0.001 0.01 0.1 1.0 10 100 1,000 T, TIME (s) Figure 9. Thermal Response Junction to Ambient Rectifier Device Data 3 MRS1504T3 0.089 2.261 0.108 2.743 0.085 2.159 inches mm SMB PACKAGE DIMENSIONS S A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. D B C K J P INCHES DIM MIN MAX A 0.160 0.180 B 0.130 0.150 C 0.075 0.095 D 0.077 0.083 H 0.0020 0.0060 J 0.006 0.012 K 0.030 0.050 P 0.020 REF S 0.205 0.220 MILLIMETERS MIN MAX 4.06 4.57 3.30 3.81 1.90 2.41 1.96 2.11 0.051 0.152 0.15 0.30 0.76 1.27 0.51 REF 5.21 5.59 H CASE 403A–03 ISSUE B Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 Customer Focus Center: 1–800–521–6274 Mfax: [email protected] – TOUCHTONE 1–602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ 4 ◊ Rectifier MRS1504T3/D Device Data