Order this document by TPV695A/D SEMICONDUCTOR TECHNICAL DATA The RF Line Designed for driver and output stages in band IV and V TV transposers and transmitter amplifiers. The TPV695A uses gold metallized die with diffused emitter ballast resistors to enhance reliability, ruggedness and linearity. • Band IV and V (470– 860 MHz) • 14 W — Pref @ – 47 dB IMD • 25 V — VCC 14 W, 470 – 860 MHz UHF LINEAR POWER TRANSISTOR • High Gain — 10 dB Min, Class A, f = 860 MHz • Gold Metallization for Reliability • Push–Pull Package MAXIMUM RATINGS Symbol Value Unit Collector–Emitter Voltage Rating VCEO 28 Vdc Collector–Base Voltage VCES 50 Vdc Emitter–Base Voltage VEBO 4.0 Vdc Collector Current — Continuous IC 5.0 Adc Total Device Dissipation @ TC = 25°C Derate above 25°C PD 50 0.4 Watts W/°C Operating Junction Temperature TJ 200 °C Storage Temperature Range Tstg – 50 to + 200 °C Operating Case Temperature Range TC –15 to + 70 °C CASE 395B–01, STYLE 1 BMA2 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Symbol Max Unit RθJC 2.5 °C/W ELECTRICAL CHARACTERISTICS Characteristic Symbol Min Typ Max Unit Collector–Emitter Breakdown Voltage (IC = 20 mA, IB = 0) V(BR)CEO 28 — — Vdc Collector–Emitter Breakdown Voltage (IC = 20 mA, VBE = 0) V(BR)CES 50 — — Vdc Emitter–Base Breakdown Voltage (IE = 5.0 mA, IC = 0) V(BR)EBO 4.0 — — Vdc ICBO — — 15 mAdc hFE 20 — 80 — Cob — 18 20 pF GPE 10 — — dB Pinover 12.5 — — W IMD1 — – 47 – 46 dB OFF CHARACTERISTICS Collector Cutoff Current (VCB = 19 V, IE = 0) ON CHARACTERISTICS DC Current Gain (IC = 1.0 A, VCE = 10 V) DYNAMIC CHARACTERISTICS Output Capacitance (VCB = 28 V, IE = 0, f = 1.0 MHz) FUNCTIONAL TESTS Common–Emitter Amplifier Power Gain (VCE = 25 V, Pout = 14 W, f = 860 MHz, IC = 2.0 x 900 mA) Overdrive (no degradation) (f = 470 MHz, VCE = 25 V, IC = 2.0 x 900 mA) Intermodulation Distortion, 3 Tone (f = 860 MHz, VCE = 25 V, IE = 2.0 x 900 mA, Pref = 14 W, Vision Carrier = – 7.0 dB, Sound Carrier = –8.0 dB, Sideband Signal = –16 dB, Specification TV05001) REV 7 RF DEVICE DATA MOTOROLA Motorola, Inc. 1995 TPV695A 1 Dimension: width/length mm Board Material — 1/50″, Teflon Glass, εr = 2.55 2.7 Ω 0.8/11 0.5/29 0.5/21 0.3/21 180 pF 0.1 µF 12 pF 2/4 1.8/7 4/5 0.8/7 22 pF 12 pF 5.6 pF 5.6 pF 22 pF 12 pF 0.1 µF 2.7 Ω IN (50 Ω) 180 pF BALUN* BALUN* OUT (50 Ω) — Balun is 50 Ω unbalanced to 2 x 25 Ω balanced Figure 1. 470 – 860 MHz Test Circuit TPV695A 2 MOTOROLA RF DEVICE DATA 0.3 Ω + 25 V 10 µF 15 Ω BL557A BL557A + 25 V 20 Ω 3.3 kΩ 2 kΩ TPV695A BD135 10 µF 56 Ω 3.8 kΩ Figure 2. Bias Network Intermodulation Distortion, 3 Tone Test Conditions: @ – 8 dB Ref. Vision Carrier, – 7 dB Ref. Sound Carrier, –16 dB Ref. Sideband Signal Pref = 14 Watts VCB = 25 Volts & ICS = 2 x 900 mA ā ā Frequency MHz IMD dB 860 760 660 560 470 – 47 – 47 – 47 – 47 – 48 ā ā ā ā ā Figure 3. IMD versus Frequency S11 S21 S12 f (MHz) |S11| ∠φ |S21| ∠φ 400 450 500 550 600 650 700 750 800 850 900 0.918 0.908 0.877 0.889 0.891 0.863 0.839 0.805 0.800 0.771 0.762 176.6 175.6 176.1 174.5 174.0 173.6 173.1 172.8 172.6 172.3 172.2 0.605 1.44 1.28 1.21 1.16 1.15 1.15 1.15 1.15 1.20 1.11 58.3 53.1 48.3 42.3 36.3 29.9 21.9 13.8 4.7 – 8.2 – 21.1 ā ā |S12| 2.75⋅10–4 3.01⋅10–4 3.10⋅10–4 3.72⋅10–4 4.31⋅10–4 6.11⋅10–4 6.03⋅10–4 6.55⋅10–4 7.29⋅10–4 8.39⋅10–4 8.55⋅10–4 S22 ∠φ |S22| ∠φ – 8.2 – 11.8 – 12.8 – 16.3 – 18.5 – 25 – 34.3 – 39.9 – 46.6 – 57.4 – 67.6 0.449 0.452 0.438 0.452 0.466 0.469 0.500 0.541 0.583 0.673 0.759 – 173.1 – 172.4 – 171.7 – 170.1 – 168.9 – 167.2 – 165.5 – 164.2 – 163.5 – 163.1 – 164.3 Table 1. S–Parameters MOTOROLA RF DEVICE DATA TPV695A 3 PACKAGE DIMENSIONS –A– Q 2 PL U 1 0.51 (0.020) M T A M B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. M 2 –B– 3 4 5 K G D J E N C H –T– SEATING PLANE STYLE 1: PIN 1. 2. 3. 4. 5. BASE BASE COLLECTOR COLLECTOR EMITTER DIM A B C D E G H J K N Q U INCHES MIN MAX 0.739 0.750 0.240 0.260 0.165 0.198 0.055 0.065 0.055 0.070 0.110 0.130 0.079 0.091 0.003 0.005 0.180 0.220 0.315 0.330 0.125 0.135 0.560 BSC MILLIMETERS MIN MAX 18.77 19.05 6.10 6.60 4.19 5.03 1.40 1.65 1.40 1.78 2.79 3.30 2.01 2.31 0.08 0.13 4.57 5.59 8.00 8.38 3.18 3.42 14.22 BSC CASE 395B–01 ISSUE A Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: [email protected] – TOUCHTONE (602) 244–6609 INTERNET: http://Design–NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 TPV695A 4 ◊ *TPV695A/D* TPV695A/D MOTOROLA RF DEVICE DATA