Order this document by MMBR5031LT1/D SEMICONDUCTOR TECHNICAL DATA The RF Line ! Designed for thick and thin–film circuits using surface mount components and requiring low–noise, high–gain signal amplification at frequencies to 1.0 GHz. • High Gain — Gpe = 17 dB Typ @ f = 450 MHz • Low Noise — NF = 2.5 dB Typ @ f = 450 MHz RF AMPLIFIER TRANSISTOR NPN SILICON • Available in tape and reel packaging options: T1 suffix = 3,000 units per reel MAXIMUM RATINGS Rating Symbol Value Unit Collector–Emitter Voltage VCEO 10 Vdc Collector–Base Voltage VCBO 15 Vdc Emitter–Base Voltage VEBO 3.0 Vdc Collector Current — Continuous IC 20 mAdc Maximum Junction Temperature TJmax 150 °C PD(max) 0.300 4.00 W mW/°C Symbol Max Unit Tstg – 55 to +150 °C RθJC 250 °C/W Power Dissipation, Tcase = 75°C (1) Derate linearly above Tcase = 75°C @ THERMAL CHARACTERISTICS Characteristic Storage Temperature Thermal Resistance Junction to Case CASE 318–08, STYLE 6 SOT–23 LOW PROFILE (TO–236AA/AB) DEVICE MARKING MMBR5031LT1 = 7G ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Typ Max Unit Collector–Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) V(BR)CEO 10 — — Vdc Collector–Base Breakdown Voltage (IC = 0.01 mAdc, IE = 0) V(BR)CBO 15 — — Vdc Emitter–Base Breakdown Voltage (IE = 0.01 mAdc, IC = 0) V(BR)EBO 3.0 — — Vdc ICBO — — 10 nAdc hFE 25 — 300 — fT — 1,000 — MHz Ccb — — 1.5 pF NFmin — 2.5 — dB Gpe — 17 25 dB Characteristic OFF CHARACTERISTICS Collector Cutoff Current (VCB = 6.0 Vdc, IE = 0) ON CHARACTERISTICS DC Current Gain (IC = 1.0 mAdc, VCE = 6.0 Vdc) SMALL–SIGNAL CHARACTERISTICS Current–Gain — Bandwidth Product (IC = 5.0 mAdc, VCE = 6.0 Vdc, f = 100 MHz) Collector–Base Capacitance (VCE = 6.0 Vdc, IE = 0, f = 0.1 MHz) Minimum Noise Figure (IC = 1.0 mAdc, VCE = 6.0 Vdc, f = 450 MHz) Common–Emitter Amplifier Power Gain (IC = 1.0 mAdc, VCE = 6.0 Vdc, f = 450 MHz) NOTE: 1.Case temperature measured on collector lead immediately adjacent to body of package. REV 7 RF DEVICE DATA MOTOROLA Motorola, Inc. 1995 MMBR5031LT1 1 PACKAGE DIMENSIONS NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. A L 3 B S 1 V 2 G C H D K J DIM A B C D G H J K L S V INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR CASE 318–08 ISSUE AE Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: [email protected] – TOUCHTONE (602) 244–6609 INTERNET: http://Design–NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 MMBR5031LT1 2 ◊ *MMBR5031LT1/D* MMBR5031LT1/D MOTOROLA RF DEVICE DATA