Order this document by MPS6507/D SEMICONDUCTOR TECHNICAL DATA COLLECTOR 3 NPN Silicon 2 BASE 1 EMITTER MAXIMUM RATINGS Rating 1 Symbol Value Unit Collector – Emitter Voltage VCEO 20 Vdc Collector – Base Voltage VCBO 30 Vdc Emitter – Base Voltage VEBO 3.0 Vdc Collector Current — Continuous IC 50 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 Watts mW/°C TJ, Tstg – 55 to +150 °C Characteristic Symbol Max Unit Thermal Resistance, Junction to Ambient RqJA(1) 200 °C/W RqJC 83.3 °C/W Operating and Storage Junction Temperature Range 2 3 CASE 29–04, STYLE 1 TO–92 (TO–226AA) THERMAL CHARACTERISTICS Thermal Resistance, Junction to Case ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Typ Max Unit Collector – Emitter Breakdown Voltage (2) (IC = 1.0 mAdc, IB = 0) V(BR)CEO 20 — — Vdc Collector – Base Breakdown Voltage (IC = 100 mAdc, IE = 0) V(BR)CBO 30 — — Vdc Emitter – Base Breakdown Voltage (IE = 100 mAdc, IC = 0) V(BR)EBO 3.0 — — Vdc — — — — 50 1.0 nAdc mAdc hFE 25 75 — — fT 700 800 — MHz Cobo — 1.25 2.5 pF hfe 20 — — — Characteristic OFF CHARACTERISTICS Collector Cutoff Current (VCB = 15 Vdc, IE = 0) (VCB = 15 Vdc, IE = 0, TA = 60°C) ICBO ON CHARACTERISTICS DC Current Gain(2) (IC = 2.0 mAdc, VCE = 10 Vdc) SMALL–SIGNAL CHARACTERISTICS Current–Gain — Bandwidth Product (IC = 10 mAdc, VCE = 10 Vdc, f = 100 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Small–Signal Current Gain (IC = 2.0 mAdc, VCE = 10 Vdc, f = 20 MHz) 1. RqJA is measured with the device soldered into a typical printed circuit board. 2. Pulse Test: Pulse Width 300 ms; Duty Cycle 2.0%. v v Motorola Small–Signal Transistors, FETs and Diodes Device Data Motorola, Inc. 1996 1 MPS6507 PACKAGE DIMENSIONS A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L F SEATING PLANE K D J X X G H V C 1 SECTION X–X N N CASE 029–04 (TO–226AA) ISSUE AD DIM A B C D F G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.115 ––– 0.135 ––– MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 2.93 ––– 3.43 ––– STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: [email protected] – TOUCHTONE (602) 244–6609 INTERNET: http://Design–NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 2 ◊ Motorola Small–Signal Transistors, FETs and Diodes Device Data MPS6507/D