VISHAY GL34B

GL34A THRU GL34J
SURFACE MOUNT GLASS PASSIVATED FAST SWITCHING JUNCTION RECTIFIER
*
Reverse Voltage - 50 to 600 Volts
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ For surface mount applications
♦ High temperature metallurgically
bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
450°C/5 seconds at terminals. Complete device
submersible temperature of 260°C for 10 seconds in
solder bath
E
D
DO-213AA
T
N
E
P
A
T
Forward Current - 0.5 Ampere
SOLDERABLE ENDS
1st BAND
2nd BAND
D1=
0.066
0.060
(1.676)
(1.524)
D2
0.022 (0.559)
0.016 (0.406)
D2 = D1 + 0
- 0.008 (0.20)
0.145 (3.683)
0.131(3.327)
1st band denotes type and polarity
2cnd band denotes voltage type
MECHANICAL DATA
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-end cap assembly by Patent No. 3,930,306
®
Case: JEDEC DO-213AA molded plastic over glass body
Terminals: Plated terminals, solderable per MIL-STD-750,
Method 2026
Polarity: Two bands indicate cathode-end - 1st band
denotes device type and 2nd band denotes repetitive peak
reverse voltage rating
Mounting Position: Any
Weight: 0.0014 ounce, 0.036 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Standard recovery device: first band is white
SYMBOLS
GL34A
GL34B
GL34D
GL34G
GL34J
Polarity color bands (2nd Band)
Maximum repetitive peak reverse voltage
VRRM
Gray
50
Red
100
Orange
200
Yellow
400
Green
600
Volts
Maximum RMS voltage
VRMS
35
70
140
280
420
Volts
Maximum DC blocking voltage
VDC
50
100
200
400
600
Volts
Maximum average forward rectified current
at TT=75°C
I(AV)
0.5
Amp
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
10.0
Amps
VF
1.2
IR
5.0
50.0
µA
30.0
µA
1.5
µs
Maximum instantaneous forward voltage at 0.5A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
Maximum full load reverse current, full cycle
average at TA=55°C
IR(AV)
1.3
Volts
Typical reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
CJ
4.0
pF
Maximum thermal resistance (NOTE 3)
(NOTE 4)
RΘJA
RΘJT
150.0
70.0
°C/W
TJ, TSTG
-65 to +175
°C
Operating junction and storage temperature range
trr
NOTES:
(1) Reverse recovery test conditions IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient, 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal
(4) Thermal resistance from junction to terminal, 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal
4/98
RATINGS AND CHARACTERISTIC CURVES GL34A THRU GL34J
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
0.5
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED CURRENT,
AMPERES
FIG. 1 - FORWARD CURRENT DERATING CURVE
60 HZ
RESISTIVE OR
INDUCTIVE LOAD
0.4
0.3
0.2
0.1
10
8.0
6.0
4.0
2.0
0
0
25
50
75
100
125
150
TJ=TJ max.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
1
10
175
100
NUMBER OF CYCLES AT 60 HZ
TERMINAL TEMPERATURE, °C
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
10
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
10
1
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
0.1
0.1
TJ=25°C
0.01
0
20
40
60
80
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
0.01
0.4
0.6
0.8
1.0
1.2
1.4
1.6
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
30
JUNCTION CAPACITANCE, pF
TJ=100°C
1
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
10
1
1
10
REVERSE VOLTAGE, VOLTS
100
100