RGP02-12E THRU RGP02-20E GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER CASE STYLE GP10E P A T E N T E D * Reverse Voltage - 1200 to 2000 Volts 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.026 (0.66) 0.023 (0.58) DIA. Forward Current - 0.5 Ampere FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ For use in high frequency rectifier circuits ♦ Fast switching for high efficiency ♦ Glass passivated cavity-free junctions ♦ 0.5 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.2µA ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 ® Case: Molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RGP02 -12E RGP02 -14E RGP02 -16E RGP02 -18E RGP02 -20E UNITS Maximum repetitive peak reverse voltage VRRM 1200 1400 1600 1800 2000 Volts Maximum RMS voltage VRMS 840 980 1120 1260 1400 Volts Maximum DC blocking voltage VDC 1200 1400 1600 1800 2000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 0.5 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 20.0 Amps Maximum instantaneous forward voltage at 0.1A VF 1.8 Volts TA=25°C TA=125°C IR 5.0 50.0 µA trr 300.0 ns CJ 5.0 pF RΘJA RΘJL TJ, TSTG 65.0 30.0 -65 to +175 Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted 4/98 °C/W °C RATINGS AND CHARACTERISTIC CURVES RGP02-12E THRU RGP02-20E FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 0.5 25 PEAK FORWARD SURGE CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD 0.4 0.3 0.2 0.1 0.375" (9.5mm) LEAD LENGTH 0 25 50 75 100 125 150 175 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 20 15 10 5 0 AMBIENT TEMPERATURE, °C 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 0.1 0.01 0.001 0.8 1.0 1.2 1.4 1.6 1.8 2 2.2 2.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 10 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 1 1 10 REVERSE VOLTAGE, VOLTS 20 10 TJ=125°C 1 TJ=75°C 0.1 TJ=25°C 0.01 0 FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF INSTANTANEOUS FORWARD CURRENT, AMPERES 1 100 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, %