GP10A thru GP10Y Vishay General Semiconductor Glass Passivated Junction Rectifier FEATURES • Superectifier application SUPERECTIFIER® structure for high reliability • Cavity-free glass-passivated junction • Low forward voltage drop • Low leakage current • High forward surge capability • Meets environmental standard MIL-S-19500 DO-204AL (DO-41) • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for both consumer and automotive applications. PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V to 1600 V IFSM 30 A, 25 A IR 5.0 μA VF 1.1 V, 1.2 V, 1.3 V TJ max. 175 °C MECHANICAL DATA Case: DO-204AL, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL A B D G J K M N Q T V W Y UNIT Maximum repetitive peak reverse voltage VRRM 50 to 1600 (fig. 5) V Maximum average forward rectified current 0.375" (9.5 mm) lead length (fig. 1) IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM Maximum full load reverse current, full cycle average, 0.375" (9.5 mm) lead length at TA = 75 °C IR(AV) Operating junction and storage temperature range TJ, TSTG Document Number: 88637 Revision: 15-Mar-11 30 25 30 - 65 to + 175 A μA - 65 to + 150 °C For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GP10A thru GP10Y Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 1.0 A SYMBOL A B VF Maximum DC reverse current at rated DC blocking voltage D G J K M 1.1 N Q T V 1.2 TA = 25 °C W Y 1.3 UNIT V 5.0 IR μA TA = 125 °C 50 Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr Typical junction capacitance 4.0 V, 1 MHz CJ 3.0 8.0 μs 7.0 5.0 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance RJA A B D G J K M (1) N Q T V W Y 55 UNIT °C/W Note (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.335 54 5500 13" diameter paper tape and reel GP10J-E3/54 GP10J-E3/73 0.335 73 3000 Ammo pack packaging GP10JHE3/54 (1) 0.335 54 5500 13" diameter paper tape and reel GP10JHE3/73 (1) 0.335 73 3000 Ammo pack packaging Note AEC-Q101 qualified (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 GP10A thru GP10M Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.8 0.6 GP10N thru GP10Y 0.4 60 Hz Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 0.2 0 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 25 20 GP10A thru GP10M 15 GP10N thru GP10Y 10 5 20 40 60 80 100 120 140 160 180 1 10 100 Ambient Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 88637 [email protected], [email protected], [email protected] Revision: 15-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GP10A thru GP10Y Vishay General Semiconductor Instantaneous Forward Current (A) 100 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle GP10A................. 50 V GP10B............... 100 V 10 GP10D.............. 200 V GP10G.............. 400 V GP10J............... 600 V GP10K............... 800 V 1 GP10M.............1000 V GP10N............. 1100 V GP10Q............. 1200 V 0.1 GP10T..............1300 V GP10A thru GP10J GP10K thru GP10Q GP10T thru GP10Y 0.01 0.6 0.8 1.0 1.2 1.4 GP10V............. 1400 V GP10W............ 1500 V GP10Y............. 1600 V 1.6 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Maximum Repetitive Peak Reverse Voltage, VRRM 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = 125 °C Junction Capacitance (pF) Instantaneous Reverse Current (μA) 10 1 TJ = 75 °C 0.1 TJ = 25 °C 0.01 10 1 0.1 0.001 0 20 40 60 80 GP10A thru GP10J GP10K thru GP10Q GP10T thru GP10Y 100 1 10 Percent of Rated Peak Reverse Voltage (%) Reverse Voltage (V) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Junction Capacitance 100 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Note 0.026 (0.66) • Lead diameter is for suffix “E” part numbers 0.023 (0.58) Document Number: 88637 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1