Features Regulated Converters ● ● ● ● ● ● ● ● ● ● ● ● POWERLINE 2:1 Wide Input Voltage Range 3 Watts Regulated Output Power 1.6kVDC Isolation Also Available with Isolated Outputs, Output 1/Output 2 (DS) Isolation Low Profile, 10.2 mm Height Over Current Protection Five-Sided Shield No Derating to 71°C Non-Conductive Black Plastic Standard DIP24 and SMD-Pinning UL 1950 Component Recognized High Efficiency to 80% DC/DC-Converter RP03-S_DE (DE/DS) Series Selection Guide 5V, 12V, 24V and 48V Input Types Part Number DIP24 (SMD) Input Range VDC RP03-053.3SE** 4.5-6 RP03-0505SE** RP03-0512SE** Output Voltage VDC Output Current mA Input (4) Current mA Efficiency(5) % Capacitive(6) Load max. µF 3.3 600 638 66 2200 4.5-6 5 600 910 70 1000 4.5-6 12 250 845 75 170 RP03-0515SE** 4.5-6 15 200 845 75 110 RP03-123.3SE** 9-18 3.3 600 252 70 2200 RP03-1205SE** 9-18 5 600 352 75 1000 RP03-1212SE** 9-18 12 250 334 79 170 RP03-1215SE** 9-18 15 200 334 79 100 RP03-243.3SE** 18-36 3.3 600 126 70 2200 RP03-2405SE** 18-36 5 600 174 76 1000 RP03-2412SE** 18-36 12 250 165 80 170 RP03-2415SE** 18-36 15 200 165 80 100 RP03-483.3SE** 36-75 3.3 600 61 72 2200 RP03-4805SE** 36-75 5 600 88 75 1000 RP03-4812SE** 36-75 12 250 84 79 170 RP03-4815SE** 36-75 15 200 84 79 100 RP03-0505DE** 4.5-6 ±5 ±300 870 73 ±500 RP03-0512DE** 4.5-6 ±12 ±125 845 75 ±96 RP03-0515DE** 4.5-6 ±15 ±100 870 73 ±47 RP03-1205DE** 9-18 ±5 ±300 357 74 ±500 RP03-1212DE** 9-18 ±12 ±125 334 79 ±96 RP03-1215DE** 9-18 ±15 ±100 334 79 ±47 RP03-2405DE** 18-36 ±5 ±300 174 76 ±500 RP03-2412DE** 18-36 ±12 ±125 167 79 ±96 RP03-2415DE** 18-36 ±15 ±100 167 79 ±47 RP03-4805DE** 36-75 ±5 ±300 86 77 ±500 RP03-4812DE** 36-75 ±12 ±125 84 79 ±96 RP03-4815DE** 36-75 ±15 ±100 84 79 ±47 3 Watt DIP24 & SMD, Single & Dual Isolated Output ** add Suffix SMD for SMD package Description The E-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all Telecom and safety applications where approved isolation is required. They also meet UL 1950 and CSA 950 standards. 182 April-2005 www.recom-international.com POWERLINE RP03-S_DE (DE/DS) Series DC/DC-Converter Selection Guide 5V, 12V, 24V and 48V Input Types Part Number Input Range mA % Capacitive(6) Load max. V1 & V2 µF 300 / 300 870 73 500 / 500 125 / 125 845 75 96 / 96 Output Voltage V1 & V2 VDC Output Current V1 & V2 mA Input (4) Current Efficiency(5) for DE/DS(V1 & V2) DIP24 (SMD) VDC RP03-0505DE/DS** 4.5-6 5/5 RP03-0512DE/DS** 4.5-6 12 / 12 RP03-0515DE/DS** 4.5-6 15 / 15 100 / 100 870 73 47 / 47 RP03-1205DE/DS** 9-18 5/5 300 / 300 357 74 500 / 500 RP03-1212DE/DS** 9-18 12 / 12 125 / 125 334 79 96 / 96 RP03-1215DE/DS** 9-18 15 / 15 100 / 100 334 78 47 / 47 RP03-2405DE/DS** 18-36 5/5 300 / 300 174 76 500 / 500 RP03-2412DE/DS** 18-36 12 / 12 125 / 125 167 79 96 / 96 RP03-2415DE/DS** 18-36 15 / 15 100 / 100 167 79 47 / 47 RP03-4805DE/DS** 36-75 5/5 300 / 300 86 77 500 / 500 RP03-4812DE/DS** 36-75 12 / 12 125 / 125 84 79 96 / 96 RP03-4815DE/DS** 36-75 15 / 15 100 / 100 84 79 47 / 47 ** add Suffix SMD for SMD package Derating-Graph (Ambient Temperature) RP03-4805SE 125 100 Output Power (%) 75 50 Natural Convection 25 0 -25 -10 0 50 60 70 Ambient Temperature Range (°C) 71 80 90 100 Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at [email protected] Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 5V nominal input 12V nominal input 24V nominal input 48V nominal input Input Filter Input Surge Voltage (100 ms max.) 4.5-6VDC 9-18VDC 18-36VDC 36-75VDC Pi Type 5V Input 12V Input 24V Input 48V Input 15VDC 36VDC 50VDC 100VDC continued on next page www.recom-international.com April-2005 183 POWERLINE RP03-S_DE (DE/DS) Series DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Input Reflected Ripple (nominal Vin and full load) 120mAp-p Start Up Time (nominal Vin and constant resistor load) 30ms typ. Output Power 3W max. Output Voltage Accuracy (full Load and nominal Vin) ±2% Minimum Load (see Note 1) 10% of FL Line Regulation (LL-HL at full load) Load Regulation (25% to 100% FL) ±0.2% DS ±0.5% Single Dual DS ±0.2% ±2% ±0.5% Cross Regulation (asymmetrical load 25%/100% FL) Ripple and Noise (20MHz bandwith) ±5% 3.3V, 5V others 75mVp-p 1%/p-p of Vout max. Temperature Coefficient ±0.02%/°C, max. Transient Response (25% load step change) 500µS Over Load Protection (% of full load at nominal Vin) 180% typ Short Circuit Protection Continuous, automatic recovery Efficiency Isolation Voltage see „Selection Guide“ table In to out Output to Output /DS type 1.600VDC min. 500VDC min. Isolation Resistance 109 Ω min. Isolation Capacitance 300pF max. Operating Frequency 100kHz min. Approved to Safety Standards UL 1950, EN60950 Operating Temperature Range -25°C to +71°C Storage Temperature Range -55°C to +105°C Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Non-conductive black plastic Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Weight DIP SMD 14g 15g Dimensions DIP SMD 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 10.9mm 3.706 x 106 Hours MTBF (see note 2) 184 Level A Level A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 April-2005 www.recom-international.com RP03-S_DE (DE/DS) Series POWERLINE DC/DC-Converter Notes : 1. The RP03 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Should an O/O isolation be required, please order the converter with the following part number: RP03-XXXXDE/DS. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. See application notes for EMI-filtering. Notes : DIP24 Package Style 3rd angle projection 31.80 20.30 Pin Connections 10.20 Pin # 3.8 2 2.54 1 + V in 2 NC 3 NC 10 - V out 11 + V out 12 – V in 13 – V in 14 + V out 15 - V out 22 NC 23 NC 24 + V in NC = No Connection 15.20 22.90 0.25 x 0.50 Rectangular Pin 10 11 12 1 2 3 Bottom View Dual + V in – V out Com Com + V out – V in – V in + V out Com Com - V out + V in Dual Separate + V in – V1 out + V1 out – V2 out + V2 out – V in – V in + V2 out – V2 out + V1 out – V1 out + V in Pin Pitch Tolerance ±0.35 mm 15 14 13 24 23 22 Single SMD Package Style SMD Package Style 32.00 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 20.30 31.40 Pin Connections 11.20 2.54 10.90 3.81 Pin # 21.30 6.35 25.40 Pin area 0.1 x 0.50 2.54 0.50 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 16 15 14 13 11 x 2.54 www.recom-international.com Top View Single 1 + V in 2 NC 3 NC 10 - V out 11 + V out 12 – V in 13 – V in 14 + V out 15 - V out 22 NC 23 NC 24 + V in Others NC NC = No Connection Dual + V in – V out Com Com + V out – V in – V in + V out Com Com - V out + V in NC Dual Separate + V in – V1 out + V1 out – V2 out + V2 out – V in – V in + V2 out – V2 out + V1 out – V1 out + V in NC Pin Pitch Tolerance ±0.35 mm 1 27.94 April-2005 185