SAMSUNG LN15

Samsung Electronics Fiberoptics products
Loose Tube Cable - SJNA
Single Jacket Non-Armored
Description
SAMSUNG Single Jacket Non-Armored cables are lightweight with
small diameter and designed for duct and aerial installation with
lashing method. The loose tube design with a metallic strength
member for LN30 or an aluminum tape for LN15 provides stable
performance over a wide temperature range and is compatible with
any telecommunication grade optical fiber.
Feature / Benefit
Up to 432 fibers
Proven loose tube design for performance
SZ stranding design allows for easy mid-span access and
isolate fibers from installation and environmental rigors
Drycore design for excellent water blocking performance
and easier handling
Small diameter and lightweight
Polyethylene jacket is easy to strip, rugged and durable
Loose Tube Cable - SJNA
Designed in accordance with applicable industry technical
LN30
specifications, standards and references including IEC and EN
Moisture barrier with aluminum/polymer laminated tape (LN15)
Cable Drawing
Colored optical fiber
Gel-filled buffer tube
Steel central member
Dielectric central member
Water swellable yarn
Water swellable tape
Laminated aluminum tape
Rip cord
Outer PE jacket
LN30: Steel central member
LN15: LAP Sheath
* Drawings are not to scale
OUTDOOR CABLE
www.samsungfiberoptics.com
LN30 | LN15
Mechanical
Performance
Crush resistance : 2,000 N/10 cm
Temperature : - Operation/Storage : -40 ~ +70 C
- Installation : -20 ~ +70 C
LN30
Fiber Count
Characteristics
Unit
2 ~ 36
2 ~ 48
2 ~ 72
96
96
144
288
Tube type (fibers per tube)
-
B(6)
C(8)
D(12)
C(8)
D(12)
D(12)
D(12)
Nominal outer diameter
mm
10.4
10.4
10.4
14.4
11.7
14.6
17.1
Nominal cable weight
kg/km
98
98
99
173
120
182
237
Maximum tensile load
N
2700
2700
2700
3400
2700
3600
4000
- Short term [Loaded] : 15*OD
mm
156
156
156
216
176
219
257
- Long term [Installed]: 10*OD
mm
104
104
104
144
117
146
171
Minimum bending radius
LN15
Fiber Count
Characteristics
Unit
2 ~ 36
2 ~ 48
2 ~ 72
96
96
144
288
Tube type (fibers per tube)
-
B(6)
C(8)
D(12)
C(8)
D(12)
D(12)
D(12)
Nominal outer diameter
mm
10.8
10.8
10.8
15.0
12.3
15.2
17.7
Nominal cable weight
kg/km
99
99
99
185
128
195
253
Maximum tensile load
N
1500
1500
1500
2700
2000
3000
3500
- Short term [Loaded] : 15*OD
mm
162
162
162
225
185
228
266
- Long term [Installed]: 10*OD
mm
108
108
108
150
123
152
177
Minimum bending radius
* Tested in accordance with IEC 60794-1
Note
Fiber colors by IEC60304: Blue/Orange/Green/Brown/Grey/White/Red/Black/Yellow/Violet/Pink/Aqua
Diameter represents a nominal value and may vary by ± 5%.
Sheath marking legend: hot foil stamp(indented)
Ex) Manufacturing year (ex. 2003)
Ordering
LN30 LN15
1
1
-
2
Fiber count
-
SAMSUNG
SJNA
SM 24
B 6 fibers
C 8 fibers
= length marking =
3
002~432
2
Tube type
A 4 fibers
3
Fiber type
S Single mode: Max. 0.38/0.25 dB/km @1310/1550 nm
M 50/125 µm: Max. 3.0/1.0 dB/km, 500/500 Mhz.km @850/1300 nm
D 12 fibers
L 62.5/125 µm: Max. 3.5/1.5 dB/km, 200/500 Mhz.km @850/1300 nm
U NZ-DSF: Max. 0.25 dB/km @1550 nm
Samsung Electronics reserves the right to improve, enhance and modify the features and specifications of Samsung Electronics fiber optic products without prior notification.
Samsung Electronics Fiberoptics Division
7th Floor, Samsung Main Building 250, 2-Ga, Taepyung-Ro, Chung-Gu, Seoul, Korea 100-742
Tel: +82-2-751-3538 Fax: +82-2-751-2687
e-mail: [email protected]