V is h ay I ntertec h n o l o g y, I nc . I INNOVAT AND TEC O L OGY MCS 0402, MCT 0603, MCU 0805, MCA 1206 Series N HN THIN FILM FUSE RESISTORS O 19 62-2012 Resistors - Precision and Superior Stability Precision Thin Film Flat Chip Resistors Key Benefits • • • • • • Thin film technology Low TCR: ± 10 to ± 25 ppm/K Precision tolerance of value: ± 0.1 and ± 0.25 % Superior overall stability: class 0.1 and 0.25 Green product, supports lead-free soldering Approved according to EN 140 401-801 APPLICATIONS • • • • • Telecommunications Industrial equipment Automotive electronics Test and measuring equipment Medical equipment Resources • Datasheet: MCS 0402, MCT 0603, MCU 0805, MCA 1206 Series - http://www.vishay.com/doc?28700 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9106-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V is h ay I ntertec h n o l o g y, I nc . MCS MCS 0402,0402, MCT 0603, 1206 - Precision MCT MCU 0603,0805, MCUMCA 0805, MCA 1206 Series O L OGY INNOVAT I THIN FILM FUSE RESISTORS AND TEC N HN O 19 Vishay Beyschlag 62-2012 FEATURES • • • • • • Approved according to EN 140401-801 Low TCR: ± 10 ppm/K to ± 25 ppm/K Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall stability: Class 0.1 and 0.25 Lead (Pb)-free solder contacts Compliant to RoHS directive 2002/95/EC APPLICATIONS • • • • Thin Film Flat Chip Resistors combine the proven reliability of the professional products with an advanced level of precision and stability. Therefore they are perfectly suited for applications in the fields of test and measuring equipment together with industrial and medical electronics. Automotive Test and measuring equipment Medical equipment Industrial equipment METRIC SIZE INCH: METRIC: 0402 0603 0805 1206 RR 1005M RR 1608M RR 2012M RR 3216M TECHNICAL SPECIFICATIONS DESCRIPTION MCS 0402 MCT 0603 MCU 0805 MCA 1206 Metric size RR 1005M RR 1608M RR 2012M RR 3216M 100 Ω to 221 kΩ 39 Ω to 511 kΩ 39 Ω to 1.5 MΩ 39 Ω to 2 MΩ Resistance range Resistance tolerance ± 0.25 %; ± 0.1 % Temperature coefficient ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K Operation mode Climatic category (LCT/UCT/days) Rated dissipation, P70 (1) Precision Standard Precision Standard Precision Standard Precision Standard 10/85/56 55/125/56 10/85/56 55/125/56 10/85/56 55/125/56 10/85/56 55/125/56 0.016 W 0.063 W 0.032 W 0.1 W 0.050 W 0.125 W 0.1 W 0.25 W Operating voltage, Umax. AC/DC 12.5 V 50 V 25 V 75 V 35 V 150 V 50 V 200 V Film temperature 85 °C 125 °C 85 °C 125 °C 85 °C 125 °C 85 °C 125 °C Max. resistance change at P70 for resistance range, |ΔR/R| max., after: 100 Ω to 221 kΩ 39 Ω to 511 kΩ 39 Ω to 1.5 MΩ 39 Ω to 2 MΩ 1000 h ≤ 0.1 % ≤ 0.2 % ≤ 0.1 % ≤ 0.2 % ≤ 0.1 % ≤ 0.2 % ≤ 0.05 % ≤ 0.1 % 8000 h ≤ 0.2 % ≤ 0.4 % ≤ 0.2 % ≤ 0.4 % ≤ 0.2 % ≤ 0.4 % ≤ 0.1 % ≤ 0.25 % 225 000 h ≤ 0.5 % ≤ 1.0 % ≤ 0.5 % ≤ 1.0 % ≤ 0.5 % ≤ 1.0 % ≤ 0.25 % ≤ 0.5 % Specified lifetime Revision 18-Dec-09 Resistors - Precision and Superior Stability Precision Thin Film Flat Chip Resistors Precision Thin Film Chip Resistors 225 000 h 225 000 h 225 000 h 225 000 h 1 min; Uins 75 V 100 V 200 V 300 V Continuous 75 V 75 V 75 V 75 V Insulation voltage: Failure rate: FITobserved ≤ 0.1 x ≤ 0.1 x 10-9/h 10-9/h ≤ 0.1 x 10-9/h ≤ 0.1 x 10-9/h Note (1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. www.vishay.com 208 PRODUCT SHEET For technical questions, contact: [email protected] 2/2 Document Number: 28700 Revision: 18-Dec-09 VMN-PT9106-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000