Packaging Vishay Beyschlag SMD Chip and MELF Resistors TAPE AND REEL CARDBOARD TAPE According to IEC 60286-3, Type I P0 P2 D0 T E F W B0 A0 P1 DIMENSIONS in millimeters FLAT CHIP PRODUCT SIZE SYMBOL 0402 0603 0606 0805 1206, 0612 A0 0.7 - 0.05 1.1 - 0.05 2.0 ± 0.05 1.65 - 0.05 2.0 ± 0.05 B0 1.2 - 0.05 1.9 - 0.05 1.75 ± 0.05 2.4 - 0.05 3.5 ± 0.1 P1 2.0 ± 0.05 4.0 ± 0.1 P2 2.0 ± 0.05 P0 4.0 ± 0.1 D0 1.5 + 0.1 E 1.72 ± 0.1 F 3.5 ± 0.05 W 8.0 ± 0.2 T Document Number: 28704 Revision: 18-Mar-09 0.43 ± 0.05 0.6 ± 0.05 For technical questions, contact: [email protected] 0.75 ± 0.05 www.vishay.com 247 Packaging SMD Chip and MELF Resistors Vishay Beyschlag BLISTER TAPE According to IEC 60286-3, Type II P0 D0 P2 E F Cover tape W B0 A0 T2 D1 P1 Direction of unreeling DIMENSIONS in millimeters MELF PRODUCT SIZE SYMBOL 0102 0204 0207 A0 1.3 ± 0.1 1.55 ± 0.1 2.4 ± 0.1 B0 2.47 ± 0.1 3.7 ± 0.1 6.0 ± 0.1 P1 4.0 ± 0.1 P2 2.0 ± 0.05 P0 4.0 ± 0.1 D0 1.5 + 0.1 E 1.75 ± 0.1 F 3.5 ± 0.05 W 5.5 ± 0.05 8.0 + 0.3/- 0.1 ≤ 1.65 T2 12 ± 0.3 ≤ 1.80 ≤ 2.7 LEADER AND TRAILER TAPE Leader end Trailer end Empty compartments with cover tape min. 160 mm Trailer (min. 160 mm) Cover tape only Leader (min. 400 mm) The minimum length of the leader is 400 mm, which includes a minimum 160 mmm of carrier tape with empty compartments and sealed by the cover tape. The minimum length of the trailer is 160 mm carrier tape with empty compartments and sealed by the cover tape. www.vishay.com 248 For technical questions, contact: [email protected] Document Number: 28704 Revision: 18-Mar-09 Packaging SMD Chip and MELF Resistors Vishay Beyschlag PEEL-OFF FORCE Peel-off forces are 0.1 N to 1.0 N for 8 mm tape and 0.1 N to 1.3 N for 12 mm tape at a peel-off speed of 300 mm ± 10 mm/minute. The peel-off angle should be between 165° and 180°. REEL W2 D C N A E W1 DIMENSIONS in millimeters - packaging codes, quantities and reel DESCRIPTION VALUE Packaging code P1 (1) B1 (1) BL P5 E0 B0 PW B2 B7 Units per reel 1000 1000 3000 5000 10 000 10 000 20 000 2000 7000 180 330 A 180 W1 330 8.4 + 1.5/- 0 12.4 + 1.5/- 0 W2max. 14.4 18.4 E 2.5 ± 0.5 D 22.5 ± 2.0 C 13.0 + 0.5/- 0.25 N 62 Note (1) Only for precision products (P1 chip resistors; B1 MELF resistors) ENVIRONMENTAL CONSIDERATIONS • Cover tape, carrier tape and reel do not contain environmentally-harmful PVC materials • Because the carrier tape is made of either paper (paper tape) or polystyrene (blister tape) and the reel is polystyrene, they are ideally suited for recycling Document Number: 28704 Revision: 18-Mar-09 For technical questions, contact: [email protected] www.vishay.com 249 Packaging SMD Chip and MELF Resistors Vishay Beyschlag BULK CASE According to IEC 60286-6 H Slider Shutter Coupling interface W L2 L1 DIMENSIONS in millimeters - packaging codes, quantities and bulk case DESCRIPTION VALUE Packaging code M3 M8 Units per bulk case 3000 8000 L1 36 L2 31.5 W 12 H 110 ENVIRONMENTAL CONSIDERATIONS • Bulk cases are designed for re-use • The construction materials are ideally suited for recycling after the case’s end life www.vishay.com 250 For technical questions, contact: [email protected] Document Number: 28704 Revision: 18-Mar-09