Ordering number:ENN5817A NPN Triple Diffused Planar Silicon Transistor 2SC5417LS Inverter Lighting Applications Features Package Dimensions · High breakdown voltage. · High reliability (Adoption of HVP process). · Adoption of MBIT process. unit:mm 2079D [2SC5417] 10.0 4.5 2.8 0.6 16.1 16.0 3.5 7.2 3.2 1.2 1.2 14.0 3.6 0.9 0.75 0.7 1:Base 2:Collector 3:Emitter 2.4 1 2 3 Specifications 2.55 2.55 SANYO:TO-220FI (LS) Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 1200 V Collector-to-Emitter Voltage VCEO VEBO 600 V 9 V IC 3 A ICP 6 A 2 W Emitter-to-Base Voltage Collector Current Collector Current (pulse) Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg 25 W 150 ˚C –55 to +150 ˚C Tc=25˚C Electrical Characteristics at Ta=25˚C Parameter Symbol Conditons Ratings min typ max Unit Collector Cutoff Current ICBO VCB=600V, IE=0 10 µA Collector Cutoff Current ICES VCE=1200V, RBE=0 1.0 mA 1.0 mA 1.0 V 1.5 V Collector Sustain Voltage Emitter Cutoff Current Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage DC Current Gain Storage Time Fall Time VCEO(sus) IC=100mA, IB=0 IEBO VEB=9V, IC=0 VCE(sat) IC=1.5A, IB=0.3A 600 VBE(sat) IC=1.5A, IB=0.3A hFE1 hFE2 VCE=5V, IC=0.1A 30 VCE=5V, IC=1.0A IC=1.5A, IB1=0.3A, IB2=–0.6A 10 tstg tf IC=1.5A, IB1=0.3A, IB2=–0.6A V 40 50 2.5 µs 0.15 µs Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O3101TS KT/51598TS (KOTO) TA-1043 No.5817-1/4 2SC5417LS Switching Time Test Circuit RC IB1 IB2 IB1 VOUT VCC IB2 0.9 VOUT VOUT 0.1 VOUT tstg I C – VCE 2 0.1A 0.05A 1 IB = 0 2 3 4 5 6 7 8 9 °C 2 1 0 0 10 0.2 Ta=120°C DC Current Gain, hFE 25°C 3 –40°C 2 10 7 5 3 2 1.0 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 VBE(sat) – I C 3 2 7 Ta=–40°C 5 25°C 120°C 3 2 0.1 7 0.01 2 1.2 3 2 1.0 7 5 3 5 7 0.1 2 3 5 7 1.0 Collector Current,IC – A 2 1.4 25°C 3 2 °C –40 0.1 7 5 3 2 0.01 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 3 5 2 3 5 Collector Current,IC – A SW Time – I C VCC =200V IC / IB1=5 IB2 / IB1 =2 R load 7 5 1.0 1.0 VCE(sat) – I C 10 7 IC / IB =5 5 10 Switching Time, SW Time – µs Base-to-Emitter Saturation Voltage, VBE(sat) – V Collector Current,IC – A 10 I / I =5 7 C B 0.8 20°C VCE =5V 5 0.6 Ta=1 hFE – I C 7 0.4 Base-to-Emitter Voltage, VBE – V Collector-to-Emitter Saturation Voltage, VCE(sat) – V Collector-to-Emitter Voltage, VCE – V 100 –40°C 0.2A 25°C 0.4A 3 120 0.6A 3 1 VCE =5V Ta= 1.2A 1.0A 0.8A 4 0 0 I C – VBE 4 2.0A 6A 1.8A 1.4A 1. Collector Current, IC – A 5 Collector Current, IC – A tf 5 tstg 3 2 1.0 7 5 tf 3 2 0.1 7 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current,IC – A No.5817-2/4 SW Time – I B2 10 7 5 2 2 0.1 3 5 7 1.0 2 3 n 0.1 7 5 7 io 2 at tf 3 3 2 er 7 5 1.0 7 5 op 1.0 3 2 0.1 7 5 3 2 0.01 Tc=25°C 7 1Pulse 5 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 Collector-to-Emitter Voltage, VCE – V Base Current, IB2 – A Reverse Bias A S O 10 PT<50µs I C=3A s 1m ms 10 Collector Current,IC – A tstg 3 Forward Bias A SO I CP=6A s 0µ 30 VCC =200V IC =1.5A IB1 =0.3A R load s 0µ 10 10 7 5 C D Switching Time, SW Time – µs 2SC5417LS P C – Ta 3 7 Collector Dissipation, PC – W Collector Current,IC – A 5 3 2 1.0 7 5 3 L=200µH 2 IB2 =–1A 0.1 Tc=25°C 1 pulse 5 7 2 100 3 5 7 1000 2 3 No he at sin k 1 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta – °C Collector-to-Emitter, VCE – V P C – Tc 30 Collector Dissipation, PC – W 2 25 20 10 0 0 20 40 60 80 100 120 140 160 Case Temperature, Tc – °C No.5817-3/4 2SC5417LS Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2001. Specifications and information herein are subject to change without notice. PS No.5817-4/4