Ordering number:ENN5311A NPN Epitaxial Planar Silicon Transistor 2SD2261 Driver Applications Applications Package Dimensions · Motor drivers, printer hammer drivers, relay drivers. unit:mm 2038A Features [2SD2261] · Darlington connection. · High DC current gain. · DC current gain is less affected by temperature. · Small-sized package. 4.5 1.6 0.4 1.0 2.5 4.25max 1.5 0.5 3 1.5 2 1 0.4 3.0 1 : Base 2 : Collector 3 : Emitter SANYO : PCP (Bottom view) 0.75 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 80 V Collector-to-Emitter Voltage VCEO VEBO 60 V 6 V IC 2.5 A Emitter-to-Base Voltage Collector Current Collector Current (Pulse) ICP Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg 5 A 1.5 W 150 ˚C –55 to +150 ˚C Mounted on a ceramic board (250mm2× 0.8mm) Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Ratings min typ Unit max Collector Cutoff Current ICBO VCB=60V, IE=0 10 µA Emitter Cutoff Current IEBO VEB=5V, IC=0 VCE=2V, IC=1A 2.5 mA DC Current Gain Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage hFE VCE(sat) VBE(sat) 2000 30000 IC=1A, IB=2mA 1.5 V IC=1A, IB=2mA 2 V V(BR)CBO IC=100µA, IE=0 V(BR)CEO IC=10mA, RBE=∞ 80 V 60 V Marking : DR Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O1899TS (KOTO) X-7044 No.5311–1/3 2SD2261 Electrical Connection C B 7kΩ 500Ω E IC -- VCE 30 1.6 180µA 160µA 140µA 1.4 1.2 1.0 120µA 0.8 0.6 0.4 2.0 1.5 1.0 --25°C Collector Current, IC – A VCE=2V A µA 0µ 250 µA 200 40 Ta= 75°C 25°C A 0µ 1.8 IC -- VBE 2.5 Collector Current, IC – A 2.0 0.5 0.2 IB=0 0 0 1 2 3 4 5 6 7 8 9 Collector-to-Emitter Voltage, VCE – V 0 10 0.2 0.4 0.6 1.0 0.8 1.2 1.4 °C 75 3 = Ta 5 --2 2 25°C °C 1000 7 5 2.0 IT00004 IC / IB=500 Collector-to-Emitter Saturation Voltage, VCE(sat) – V 5 1.8 VCE (sat) -- IC 3 VCE=2V 7 1.6 Base-to-Emitter Voltage, VBE – V hFE -- IC 10000 DC Current Gain, hFE 0 IT00003 2 1.0 Ta=--25°C 75°C 7 25°C 5 3 3 2 2 5 3 7 2 0.1 3 5 7 2 1.0 3 5 5 VBE (sat) -- IC 3 75°C 1.0 25°C 7 5 3 5 7 1.0 Collector Current, IC – A 2 3 5 IT00007 2 1.0 1m 10 3 5 IT00006 s ms 2 1.0 7 5 DC op era tio 3 2 n 0.1 7 5 Ta=25°C Single pulse Mounted on a ceramic board (250mm2×0.8mm) 0.01 2 7 5 IC 3 2 3 2 3 ICP 3 Ta=--25°C 0.1 2 Collector Current, IC – A ASO 7 5 2 7 0.1 10 IC / IB=500 5 7 IT00005 Collector Current, IC – A Base-to-Emitter Saturation Voltage, VBE(sat) – V Collector Current, IC – A 3 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Emitter Voltage, VCE – V 7 100 IT00008 No.5311–2/3 2SD2261 PC -- Ta 1.6 Collecter Dissipation, PC – W 1.4 M ou nt 1.2 ed 1.0 on ac er am ic 0.8 bo ar d (2 50 0.6 m m2 ×0 0.4 .8 m m ) 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta – °C 140 160 IT00009 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 1999. Specifications and information herein are subject to change without notice. PS No.5311–3/3