Ordering number:ENN6353 PNP Epitaxial Planar Silicon Transistor CPH3120 Compact Motor Driver Applications Package Dimensions unit:mm 2150A [CPH3120] 2.9 0.15 0.4 0.2 · Small saturation voltage. · Contains a diode between collector and emitter. · Contains bias resistance between base and emitter. · Large current capacity. · Compact package facilitates implementation of highdensity, small-sized hybrid ICs. 0.6 Features 3 2 1 2.8 0.6 1.6 0.05 0.2 1.9 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO –20 V Collector-to-Emitter Voltage VCEO VEBO –15 V –5 V IC –0.8 A Emitter-to-Base Voltage Collector Current Collector Current (Pulse) ICP Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg –2 A 0.9 W 150 ˚C –55 to +150 ˚C Mounted on a ceramic board (600mm2×0.8mm) Electrical Characteristics at Ta = 25˚C Parameter Symbol Collector Cutoff Current ICBO Conditions hFE VCE=–2V, IC=–0.5A Gain-Bandwidth Product fT Cob VCE=–2V, IC=–0.5A VCB=–10V, f=1MHz Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage VCE(sat) VBE(sat) typ VCB=–15V, IE=0 DC Current Gain Output Capacitance Ratings min max –1.0 Unit µA 70 200 MHz 30 IC=–500mA, IB=–10mA IC=–500mA, IB=–10mA pF –110 –200 mV –0.81 –1.3 V Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 13100TS (KOTO) TA-2476 No.6353–1/4 CPH3120 Continued from preceding page. Ratings Parameter Symbol Collector-to-Base Breakdown Voltage Conditions min V(BR)CBO IC=–10µA, IE=0 V(BR)CEO IC=–10mA, RBE=∞ Collector-to-Emitter Breakdown Voltage Diode Forward Voltage VF RBE Base-to-Emitter Resistance typ Unit max –20 V –15 V IE=–0.5A –1.5 V 1.6 kΩ Electrical Connection 3 1 RBE 1 : Base 2 : Emitter 3 : Collector 2 IC -- VCE --2.0 --1.2 --1.0 Collector Current, IC – mA A 6m --1 Collector Current, IC – A A --14m --1.6 --12mA --10mA --8mA --6mA --0.8 --4mA --0.4 IB=0 0 --0.4 --0.8 --1.2 --1.6 Collector-to-Emitter Voltage, VCE – V --3mA --0.6 --0.4 --2mA --1mA IB=0 0 --2 --4 --6 --8 --10 Collector-to-Emitter Voltage, VCE – V IT01557 hFE -- IC 3 VCE=--2V 2 DC Current Gain, hFE --1.6 --1.4 --1.2 --1.0 --0.8 5 °C 25°C --25° C --0.6 --0.4 Ta= 7 Collector Current, IC – A --4mA 0 --2.0 VCE=--2V --1.8 --5mA --0.8 IT01556 IC -- VBE --2.0 A --6m --0.2 --2mA 0 IC -- VCE --1.2 --0.2 100 C 5° 7 25° =7 Ta 5 C C 5° --2 3 2 10 7 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE – V --1.2 IT01558 5 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC – A 7 --1.0 2 3 IT01559 No.6353–2/4 CPH3120 VCE(sat) -- IC 7 IC / IB=20 7 Base-to-Emitter Saturation Voltage, VBE(sat) – V Collector-to-Emitter Saturation Voltage, VCE(sat) –mV 5 3 2 C 5° --2 °C 75 --100 = Ta 7 °C 25 5 3 5 3 2 Ta=--25°C --1.0 7 75°C 5 25°C 3 2 2 5 7 2 --0.1 3 5 7 2 --1.0 Collector Current, IC – A 3 5 Collector Current, IC – A 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC – A 2 3 IT01562 s 3 s 0µ 2 0µ 30 7 --0.01 1ms 7 5 DC op era 3 tio 2 n --0.1 7 5 2 3 3 IT01561 IC --1.0 3 5 2 --1.0 10 7 7 ms 10 0ms 10 100 5 ICP 2 5 2 3 ASO 3 3 2 --0.1 Collector Current, IC – A VCE=--2V 5 7 IT01560 f T -- IC 7 Gain-Bandwidth Product, f T – MHz VBE(sat) -- IC --10 IC / IB=20 Ta=25°C Single pulse Mounted on a ceramic board(600mm2×0.8mm) --0.01 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 IT01563 Collector-to-Emitter Voltage, VCE – V PC -- Ta 1.0 Collector Dissipation, PC – W 0.9 M ou nte d 0.8 on a 0.6 ce ram ic 0.4 bo ard (6 00 mm 2 ×0 .8 m m ) 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta – °C 140 160 IT01564 No.6353–3/4 CPH3120 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2000. Specifications and information herein are subject to change without notice. PS No.6353–4/4