Ordering number : ENN2246B 2SB1274/2SD1913 PNP/NPN Epitaxial Planar Silicon Transistors 2SB1274/2SD1913 60V/3A Low-Frequency Power Amplifier Applications Applications • Package Dimensions General power amplifier. unit : mm 2041A [2SB1274/2SD1913] • 16.0 5.6 • 2.4 1.6 1.2 14.0 • 3.2 Wide ASO (Adoption of MBIT process). Low saturation voltage. High reliability. High breakdown voltage. Micaless package facilitating mounting. 18.1 • 3.5 7.2 Features • 4.5 2.8 10.0 0.7 0.75 1 2 2.55 2.4 Specifications ( ):2SB1274 Absolute Maximum Ratings at Ta=25°C Parameter 3 2.55 2.55 Symbol 1 : Base 2 : Collector 3 : Emitter SANYO : TO-220ML 2.55 Conditions Ratings Unit Collector-to-Base Voltage VCBO (−)60 V Collector-to-Emitter Voltage VCEO (−)60 V Emitter-to-Base Voltage VEBO (−)6 V IC (−)3 A ICP (−)8 A 2 W Collector Current Collector Current (Pulse) Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Tc=25°C 20 W 150 °C −55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current Symbol ICBO IEBO Conditions Ratings min typ max VCB=(--)40V, IE=0 VEB=(--)4V, IC=0 Unit (--)100 µA (--)100 µA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2000 TS IM 8-2055 No.2246-1/4 2SB1274/2SD1913 Continued from preceding page. Parameter Symbol hFE1 hFE2 VCE=(--)5V, IC=(--)0.5A fT Cob VCE=(--)5V, IC=(--)0.5A VCB=(--)10V, f=1MHz VCE(sat) IC=(--)2A, IB=(--)0.2A VCE=(--)5V, IC=(--)0.5A DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Voltage Ratings Conditions min Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Unit max 70* VCE=(--)5V, IC=(--)3A VBE typ 280* 20 100 MHz (60)40 pF (--)0.4 (--)1 (--)0.8 (--)1 V V (--)60 V V(BR)CEO IC=(--)1mA, IE=0 IC=5mA, RBE=∞ (--)60 V V(BR)EBO IE=(--)1mA, IC=0 (--)6 V * : The 2SBB1274 / 2SD1913 are classified by 0.5A hFE as follows : Rank Q R S hFE 70 to 140 100 to 200 140 to 280 IC -- VCE mA--45m --2.0 2.5 --20mA --50 --15mA --1.5 --10mA --1.0 --5mA --0.5 IB=0 2.0 10mA 1.5 5mA 1.0 --2 --3 --4 IB=0 0 --5 --6 0 IT02816 IC -- VBE 1 2 5 6 Collector-to-Emitter Voltage, VCE -- V IT02817 4 IC -- VBE 3.6 2SB1274 VCE= --5V 3 2SD1913 VCE=5V 3.2 --2.4 --2.0 0° C 25° C --40 °C --1.6 Ta = 12 --1.2 --0.8 2.8 2.4 2.0 1.6 1.2 25°C --40° C Collector Current, IC -- A --2.8 C --1 Collector-to-Emitter Voltage, VCE -- V Collector Current, IC -- A 2SD1913 15mA 20° 0 --3.2 20mA 0.5 0 --3.6 mA A 30 25m mA mA 40 35 Ta= 1 Collector Current, IC -- A --2.5 50mA 45mA A --4 0m --35 IC -- VCE 3.0 --30mA --25mA mA A 2SB1274 Collector Current, IC -- A --3.0 0.8 0.4 --0.4 0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V --1.2 --1.4 IT02818 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE -- V 1.2 1.4 IT02819 No.2246-2/4 2SB1274/2SD1913 hFE -- IC 1000 7 Ta=120°C 2 25°C DC Current Gain, hFE 3 --40°C 100 7 100 7 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 2 7 0.01 5 2 3 5 7 0.1 2 100 7 5 3 2 10 3 5 7 1.0 2 7 3 5 IT02821 f T -- IC 3 2SB1274 VCE= --5V 2 Collector Current, IC -- A IT02820 f T -- IC 3 Gain-Bandwidth Product, f T -- MHz --40°C 3 3 25°C 2 5 2 Ta=120°C 3 5 Gain-Bandwidth Product, f T -- MHz DC Current Gain, hFE 5 2 7 --0.01 2SD1913 VCE=5V 2 100 7 5 3 2 10 7 5 5 7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 5 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 3 °C 25 0°C 12 a= 7 T 5 2 0.1 3 5 1.0 C 0° --4 3 2 2 --0.01 7 3 5 IT02823 VCE(sat) -- IC 2SD1913 IC / IB=10 1.0 5 --0.1 5 2 7 2 3 Collector Current, IC -- A 2SB1274 IC / IB=10 --1.0 2 0.01 IT02822 VCE(sat) -- IC 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 2SD1913 VCE=5V 7 5 7 5 3 2 °C 25 0.1 7 0°C 2 =1 Ta 5 3 C 0° --4 2 0.01 7 7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 5 7 0.01 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 7 5 3 2 25°C 7 --40°C 5 5 2 3 5 7 1.0 2 3 5 IT02825 2SD1913 IC / IB=10 10 7 5 3 2 Ta= --40°C 1.0 25°C 7 120°C 5 3 7 0.1 VBE(sat) -- IC 2 --10 Ta=120°C 3 Collector Current, IC -- A 2SB1274 IC / IB=10 --1.0 2 IT02824 VBE(sat) -- IC 2 Base-to-Emitter Saturation Voltage, VBE(sat) -- V hFE -- IC 1000 2SB1274 VCE= --5V 3 7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 IT02826 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 5 IT02827 No.2246-3/4 2SB1274/2SD1913 ASO ASO 2 ICP= --8A 50 10 5 0m op s s era tio --1.0 n 7 5 3 2 10 5 0m s IC=3A 3 50 DC 0µ op era 2 s tio n 1.0 7 5 3 0.1 2 3 5 7 2 --10 3 5 Collector-to-Emitter Voltage, VCE -- V 7 2 --100 IT02828 3 5 7 2 10 Collector Dissipation, PC -- W he at sin k 1.0 0.5 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 7 100 IT02829 2SB1274 / 2SD1913 2.0 No 5 PC -- Tc 25 2SB1274 / 2SD1913 1.5 3 Collector-to-Emitter Voltage, VCE -- V PC -- Ta 2.5 Collector Dissipation, PC -- W 7 2 --0.1 0 0 100µs s 1m s m 10 2 s m DC 0µ 1m s IC= --3A ICP=8A 10 Collector Current, IC -- A 7 3 2SD1913 100µs 10 Collector Current, IC -- A --10 2 2SB1274 160 IT02831 20 15 10 5 0 0 20 40 60 80 100 120 140 Case Temperature, Tc -- °C 160 IT02830 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2000. Specifications and information herein are subject to change without notice. PS No.2246-4/4