NEW PRODUCT NEW PRODUCT NEW PRODUCT UGF10FCT AND UGF10GCT ULTRAFAST SOFT RECOVERY RECTIFIER Reverse Voltage - 300 to 400 Volts Forward Current - 10.0 Amperes FEATURES ITO-220AB 0.188 (4.77) 0.172 (4.36) 0.405 (10.27) 0.383 (9.72) 0.110 (2.80) 0.100 (2.54) 0.131 (3.39) DIA. 0.122 (3.08) 0.140 (3.56) DIA. 0.130 (3.30) 0.600 (15.5) 0.580 (14.5) 0.670 (17.2) 0.646 (16.4) PIN 1 2 3 0.350 (8.89) 0.330 (8.38) 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.110 (2.80) 0.100 (2.54) 0.060 (1.52) 0.037 (0.94) 0.027 (0.69) 0.205 (5.20) 0.195 (4.95) 0.105 (2.67) 0.095 (2.41) 0.022 (0.55) 0.014 (0.36) PIN 1 PIN 2 PIN 3 ♦ Plastic package has Underwriters Laboratories Flammability Classification 94V-0 ♦ Ideally suited for free wheeling diode power factor correction applications ♦ Soft recovery characteristics ♦ Excellent high temperature switching ♦ Optimized to reduce switching losses ♦ High temperature soldering guaranteed: 250°C, 0.25" (6.35mm) from case for 10 seconds ♦ Glass passivated chip junction MECHANICAL DATA Case: ITO-220AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Weight: 0.08 ounce, 2.24 grams Mounting Torque: 5 in. - lbs. max. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS UGF10FCT UGF10GCT UNITS Maximum repetitive peak reverse voltage Working peak reverse voltage VRRM VRWM 300 225 400 300 Volts Volts Maximum RMS voltage VRMS 210 280 Volts Maximum DC blocking voltage VDC 300 400 Volts Maximum average forward rectified current at TC=100°C I(AV) 10 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg IFSM 60A Amps Maximum instantaneous forward voltage per leg IF= 5A Maximum reverse leakage current at working peak reverse voltage TJ=25°C TJ=150°C TJ=25°C TJ=100°C Maximum reverse recovery time per leg at IF=0.5A, IR=1.0A, Irr=0.25A Maximum Reverse recovery time per leg at IF=1.0A, di/dt=100A/µs, VR=30V, Irr=0.1 IRM Maximum reverse recovery current per leg at IF=5A, di/dt=50A/µs,VR=30V Maximum stored charge per leg IF=2A, di/dt=20A/µs, VR=30V, Irr=0.1 IRM Typical thermal resistance from junction to case per leg Operating junction and storage temperature range 4/98 TC=100°C VF IR 1.30 1.05 10 200 Volts µA trr 35 ns trr 50 ns IRM 3.0 Amps Qrr 50 nC RΘJC TJ, TSTG 6.0 -40 to +150 °C/W °C RATINGS AND CHARACTERISTIC CURVES UGF10FCT AND UGF10GCT FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 15 100 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TC=105°C RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES FIG. 1 -FORWARD CURRENT DERATING CURVE 10 5 0 10 1 25 0 50 100 75 125 150 NUMBER OF CYCLES AT 60 HZ CASE TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1,000 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 10 TJ=125°C 1 TJ=100°C 0.1 TJ=25°C TJ=125°C 100 TJ=100°C 10 1 0.1 0.01 0.2 0.4 0.6 1 0.8 1.2 1.4 1.6 TJ=25°C 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - REVERSE SWITCHING CHARACTERISTICS PER LEG FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEG 100 300 TJ=125°C f=1.0 MHz Vsig=50MVp-p @5A, 50A/µs 250 200 @2A, 20A/µs 150 @5A, 50A/µs 100 @2A, 20A/µs CAPACITANCE, pF STORED CHARGE/REVERSE RECOVERY TIME, nC/ns 100 10 1 10 50 trr Qrr @1A, 100A/µs 0 25 50 75 100 JUNCTION TEMPERATURE, °C 125 1 0.1 1 10 100 REVERSE VOLTAGE, VOLTS 1,000