Ordering number : ENN7397 TIG004SS N-Channel IGBT TIG004SS Light-Controlling Strobe Applications Features • • • • Package Dimensions Low-saturation voltage. 4V drive. Enhansment type. Built-in Gate-to-Emitter protection diode. unit : mm 2203 [TIG004SS] 5 4 0.2 1.8max 1 6.0 4.4 0.3 8 0.595 Specifications 1.27 0.43 0.1 1.5 5.0 1 : Emitter 2 : Emitter 3 : Emitter 4 : Gate 5 : Collector 6 : Collector 7 : Collector 8 : Collector SANYO : SOP8 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Emitter Voltage VCES 400 V Gate-to-Emitter Voltage (DC) VGES ±6 V Gate-to-Emitter Voltage (Pulse) VGES ±8 V 150 A Collector Current (Pulse) Channel Temperature ICP Tch Storage Temperature Tstg PW≤500µs, duty cycle≤0.5% 150 °C --40 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Cutoff Current Gate-to-Emitter Leakage Current Gate-to-Emitter Threshold Voltage Collector-to-Emitter Saturation Voltage V(BR)CES Conditions Ratings min typ IC=5mA, VGE=0 VCE=320V, VGE=0 VGE=±6V, VCE=0 400 ICES IGES VGE(off) VCE(sat)1 VCE=10V, IC=1mA IC=150A, VGE=4V 0.5 VCE(sat)2 IC=60A, VGE=2.5V VCE=10V, f=1MHz Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres VCE=10V, f=1MHz VCE=10V, f=1MHz max Unit V 10 µA ±10 µA 1.2 V 4.2 5.5 V 2.4 3.4 V 3300 pF 75 pF 40 pF Note : TIG004SS has protection diode between gate and emitter but handling it requires sufficient care to be taken. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 22004 TS IM TA-3794 No.7397-1/3 TIG004SS Electrical Connection C 8 C 7 C 6 C 5 1 E 2 E 3 E 4 G IC -- VCE 200 Collector Current, IC -- A Collector Current, IC -- A 160 4V 160 140 3V 120 100 80 VGE=2V 60 40 140 120 100 80 60 40 20 20 0 0 0 1 2 3 4 0.5 1.0 4.5 IC=150A 3.5 120A 3.0 90A 2.5 60A 2.5 3.0 3.5 4.0 IT04214 Cies 3 Cies, Coes, Cres -- pF 4.0 2.0 Cies, Coes, Cres -- VCE 10000 7 5 Tc=25°C 1.5 Gate-to-Emitter Voltage, VGE -- V IT04213 VCE -- VGE 5.0 0 5 Collector-to-Emitter Voltage, VCE -- V Collector-to-Emitter Voltage, VCE -- V Tc=25°C VCE=5V 5V 180 2.0 1.5 1.0 0.5 2 1000 7 5 3 2 100 7 5 Coes 3 Cres 2 0 0 1 2 3 4 5 Gate-to-Emitter Voltage, VGE -- V 0 1.0 0.8 0.6 0.4 0.2 0 25 50 75 10 15 100 Case Temperature, Tc -- °C 125 150 IT04217 20 25 30 35 40 45 IT04216 VCE(sat) -- Tc 7 VCE=10V IC=1mA --25 5 Collector-to-Emitter Voltage, VCE -- V IT04215 VGE(off) -- Tc 1.2 0 --50 10 6 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Gate-to-Emitter Cutoff Voltage, VGE(off) -- V IC -- VGE 180 Tc=25°C 6 A =150 V, I C 5 =4.0 VGE 4 3 VGE=2.5V, IC=60A 2 1 0 --50 --25 0 25 50 75 100 Case Temperature, Tc -- °C 125 150 IT04218 No.7397-2/3 TIG004SS ICP -- VGE 160 CM -- ICP 400 140 Tc=25°C Tc=70°C 120 100 80 60 40 20 0 0 VCM=350V Tc≤70°C VGE=4V RG≥30Ω 350 Maximum Capacitor, CM -- µF Collector Current(Pulse), ICP -- A CM=240µF 300 250 200 150 100 50 1 2 3 4 5 6 Gate-to-Emitter Voltage, VGE -- V 7 8 IT04219 0 0 20 40 60 80 100 120 140 Collector Current(Pulse), ICP -- A 160 IT04220 Note 1 : The gate series resistance RG must be 30Ω or more to protect the device when it is turned off. Note 2 : The collector current gradient di/dt must be smaller than 150A/µs and the collector voltage gradient dv/dt must be smaller than 400V/µs to protect the device when it is turned off. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2004. Specifications and information herein are subject to change without notice. PS No.7397-3/3