HCF4040B RIPPLE-CARRY BINARY COUNTER/DIVIDERS 12 STAGE ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ MEDIUM SPEED OPERATION : tPD = 80ns (TYP.) at VDD = 10V FULLY STATIC OPERATION COMMON RESET BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT II = 100nA (MAX) AT VDD = 18V TA = 25°C 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC JESD13B " STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES" DESCRIPTION The HCF4040B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. DIP SOP ORDER CODES PACKAGE TUBE T&R DIP SOP HCF4040BEY HCF4040BM1 HCF4040M013TR The HCF4040B is a ripple carry binary counter. All counter stages are master-slave flip-flops. The state of a counter advances one count on the negative transition of each input pulse; a high level on the RESET line resets the counter to its all zeros stage. Schmitt trigger action on the input pulse line permits unlimited clock rise and fall times. All inputs and outputs are buffered PIN CONNECTION September 2001 1/10 HCF4040B IINPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No 9, 7, 5, 4, 6, 13, 12, 14, 15, 1, 2, 3 11 10 SYMBOL Q1 to Q12 8 RESET Φ VSS 16 VDD NAME AND FUNCTION 12 Buffered Outputs Reset Input Input Pulses Negative Supply Voltage Positive Supply Voltage FUNCTIONAL DIAGRAM TRUTH TABLE X : Don’t Care 2/10 Φ RESET OUTPUT STATE X H ALL OUTPUTS = "L" L NO CHANGE L ADVANCE TO NEXT STATE HCF4040B LOGIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol VDD Parameter Supply Voltage Value Unit -0.5 to +22 V VI DC Input Voltage -0.5 to VDD + 0.5 V II DC Input Current ± 10 mA 200 100 mW mW Top Power Dissipation per Package Power Dissipation per Output Transistor Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C PD Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol VDD Parameter Supply Voltage VI Input Voltage Top Operating Temperature Value Unit 3 to 20 V 0 to VDD V -55 to 125 °C 3/10 HCF4040B DC SPECIFICATIONS Test Condition Symbol IL VOH VOL VIH VIL IOH IOL II CI Parameter Quiescent Current High Level Output Voltage Low Level Output Voltage VI (V) 0/5 0/10 0/15 0/20 0/5 0/10 0/15 5/0 10/0 15/0 High Level Input Voltage Low Level Input Voltage Output Drive Current Output Sink Current Input Leakage Current Input Capacitance VO (V) 0/5 0/5 0/10 0/15 0/5 0/10 0/15 0/18 0.5/4.5 1/9 1.5/13.5 4.5/0.5 9/1 13.5/1.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 Value |IO| VDD (µA) (V) <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 Any Input Any Input 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 10 15 18 TA = 25°C Min. Typ. Max. 0.04 0.04 0.04 0.08 5 10 20 100 4.95 9.95 14.95 -40 to 85°C -55 to 125°C Min. Min. 150 300 600 3000 4.95 9.95 14.95 0.05 0.05 0.05 4.95 9.95 14.95 3.5 7 11 1.5 3 4 -3.2 -1 -2.6 -6.8 1 2.6 6.8 ±0.1 5 7.5 0.05 0.05 0.05 1.5 3 4 -1.1 -0.36 -0.9 -2.4 0.36 0.9 2.4 The Noise Margin for both "1" and "0" level is: 1V min. with VDD =5V, 2V min. with VDD=10V, 2.5V min. with VDD=15V 4/10 V V 1.5 3 4 ±1 µA V 3.5 7 11 -1.1 -0.36 -0.9 -2.4 0.36 0.9 2.4 ±10-5 Max. 150 300 600 3000 0.05 0.05 0.05 3.5 7 11 -1.36 -0.44 -1.1 -3.0 0.44 1.1 3.0 Max. Unit V mA mA ±1 µA pF HCF4040B DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200KΩ, tr = tf = 20 ns) Test Condition Symbol Parameter tPLH tPHL Propagation Delay Time (∅ to Q1 Out) tPLH tPHL Propagation Delay Time (Qn to Qn+1) tTHL tTLH Transition Time tW tr , tf fmax tPHL tW tREM Minimum Input Pulse Width Input Pulse Rise and Fall Time Maximum Clock Input Frequency Propagation Delay Time Minimum Reset Pulse Width Reset Removal Time VDD (V) INPUT-PULSE OPERATION 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 RESET OPERATION 5 10 15 5 10 15 5 10 15 Value (*) Min. 3.5 8 12 Unit Typ. Max. 180 80 65 100 40 30 100 50 40 70 30 20 360 160 130 200 80 60 200 100 80 140 60 40 ns ns ns ns unlimited µs 7 16 24 MHz 140 60 50 100 40 30 175 75 50 280 120 100 200 80 60 350 150 100 ns ns ns (*) Typical temperature coefficient for all VDD value is 0.3 %/°C. 5/10 HCF4040B TEST CIRCUIT CL = 50pF or equivalent (includes jig and probe capacitance) RL = 200KΩ RT = ZOUT of pulse generator (typically 50Ω) WAVEFORM 1 : MINIMUM PULSE WIDTH (RESET) AND REMOVAL TIME ( RESET TO Φ) (f=1MHz; 50% duty cycle) 6/10 HCF4040B WAVEFORM 2 : PROPAGATION DELAY TIME (f=1MHz; 50% duty cycle) WAVEFORM 3 : PROPAGATION DELAY TIME, MINIMUM PULSE WIDTH (Φ) (f=1MHz; 50% duty cycle) 7/10 HCF4040B Plastic DIP-16 (0.25) MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 0.77 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 8/10 HCF4040B SO-16 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 9.8 10 0.385 0.393 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8° (max.) PO13H 9/10 HCF4040B Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom © http://www.st.com 10/10