TE and TD Vishay Dale Filter Inductors Toroid FEATURES • Choice of encapsulated (TE) or dipped (TD) styles • TD style combines low cost with excellent performance in commercial applications • High Q and wide selection of Q versus frequency ranges in one small package. Large number of standard inductance values RoHS COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS (Applies to Core Only) MODEL TC CODE TEMPERATURE COEFFICIENT TC AVAILABILITY TEMPERATURE RANGE TE-3 TD-3 TE-4 TD-4 TE-5 TD-5 X X X TA 0 ± 1% X X X TD 0 ± 0.1% X X X TL* + 40 to + 110 ppm/°C + 85 to + 185 ppm/°C - 55 °C to + 25 °C + 25 °C to + 85 °C X X X TM 0 ± 0.25 % - 6 5°C to + 125 °C X X X TR 50 ppm/°C (Typical) - 65 °C to + 125 °C X X X TW 0 ± 0.25 % - 55 °C to + 85 °C Q0 Q3 Q4 - 55 °C to + 125 °C X X 0 °C to + 55 °C X X X X X X X X * Inverse of typical Temperature Coefficient of polystyrene capacitor. ELECTRICAL SPECIFICATIONS INDUCTANCE RANGE Tolerance: TC CODE TE-3 TD-3 TE-4 TD-4 TE-5 TD-5 Q0 50 µH to 15 mH 150 µH to 20 mH 1 mH to 100 mH Q3 500 µH to 1 H 1 mH to 2 H 5 mH to 2 H TE-3, TD-3 = ± 1 % > 2 mH, ± 2 % 154 µH to 2 mH, ± 5 % < 150 µH TE-4, TD-4 = ± 1 % > 2 mH, ± 2 % < 2 mH TE-5, TD-5 = ± 1% > 2mH, ± 2% < 2mH Q4 1 mH to 4 H 2 mH to 5 H 10 mH to 5 H Insulation Resistance: 1000 Megohm minimum Dielectric Strength: 1000 V minimum (TE) 500 V minimum (TD) DIMENSIONS in inches [millimeters] TE TD MECHANICAL SPECIFICATIONS A Dia. Max. D C Min. B F Dia. Max. C Min. A Dia. Max. D Weight: TE-3 = 5.1 grams, TD-3 = 4.9 grams typical TE-4 = 20 grams, TD-4 = 17 grams typical TE-5 = 53 grams, TD-5 = 52 grams typical F Min. Dia. MODEL A B F G TE-3 0.685 [17.40] 0.385 [9.78] 1.0 0.025 0.500 [25.40] [0.635] [12.70] 0.093 [2.36] 0.250 [6.35] TD-3 0.685 [17.40] 0.320 [8.13] 3.0 [76.20] 0.125 [3.18] - TE-4 1.06 0.500 1.0 0.032 0.900 [26.92] [12.70] [25.40] [0.813] [22.86] 0.120 [3.05] 0.450 [11.43] TD-4 1.06 0.437 4.0 [26.92] [11.10] [101.60] 0.220 [5.59] - TE-5 1.33 0.735 1.0 0.032 1.0 [33.78] [18.67] [25.40] [0.813] [25.40] 0.144 [3.66] 0.500 [12.70] TD-5 1.32 0.688 6.0 [33.53] [17.48] [152.40] 0.220 [5.59] - www.vishay.com 56 C - - - Terminal Strength: 2 pounds pull test (TE) Vibration: Per MIL-T-27 (TE) Shock: Per MIL-T-27 (TE) B Max. G E 0.375 ± 0.125 [9.53 ± 3.18] E - - - MATERIAL SPECIFICATIONS Coating: Vinyl (TD), non-flammable, abrasion and moisture resistant. Resists most cleaning agents (Consult factory for chemicals which may be used) Standard Terminals: Tinned copper (TE) Stranded, tinned copper, Teflon insulated (TD) Encapsulant: Epoxy (TE) Gauge: TE-3 = 22 AWG, TD-3 = 26 AWG TE-4 = 20 AWG, TD-4 = 24 AWG TE-5 = 20 AWG, TD-5 = 24 AWG For technical questions contact [email protected] Document Number: 34078 Revision: 02-Jun-06 TE and TD Filter Inductors, Toroid Vishay Dale DESCRIPTION TE-3 Q0 TR 5 mH ±1% EB e2 MODEL Q TYPE TC CODE INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD T E GLOBAL PART NUMBER T E Q 3 MODEL O Q TYPE R 5 B 0 PACKAGE CODE TC CODE 0 F 1 INDUCTANCE VALUE INDUCTANCE TOLERANCE DC RESISTANCE AND SELF-RESONANT FREQUENCIES (Typical Values) MODEL INDUCTANCE TE-3, TD-3 TE-3, TD-3 TE-3, TD-3 TE-3, TD-3 TE-3, TD-3 TE-3, TD-3 TE-3, TD-3 TE-3, TD-3 TE-3, TD-3 TE-3, TD-3 TE-3, TD-3 TE-3, TD-3 TE-4, TD-4 TE-4, TD-4 TE-4, TD-4 TE-4, TD-4 TE-4, TD-4 TE-4, TD-4 TE-4, TD-4 TE-4, TD-4 TE-5, TD-5 TE-5, TD-5 TE-5, TD-5 TE-5, TD-5 TE-5, TD-5 TE-5, TD-5 TE-5, TD-5 TE-5, TD-5 TE-5, TD-5 50.0 µH 100.0 µH 332.0 µH 1.0 mH 3.32 mH 10.0 mH 15.0 mH 33.2 mH 100.0 mH 332.0 mH 1.0 H 4.0 H 150.0 µH 1.0 mH 2.0 mH 10.0 mH 20.0 mH 100.0 mH 1.0 H 2.0 H 1.0 mH 3.32 mH 5.0 mH 10.0 mH 33.2 mH 100.0 mH 332.0 mH 1.0 H 2.0 H Q0 DCR (Ohms) Q3 Q4 SELF-RESONANT FREQUENCY (MHz) Q0 Q3 Q4 0.68 1.0 3.3 6.9 24.0 84.0 106.0 0.54 2.8 5.5 27.0 54.0 1.8 5.2 6.5 13.0 49.0 133.0 - 1.5 4.1 14.0 17.0 40.0 138.0 555.0 1500.0 0.7 1.4 4.9 9.6 56.0 570.0 1200.0 1.8 2.4 8.8 27.0 80.0 222.0 475.0 0.82 2.3 5.9 9.1 18.0 58.0 220.0 670.0 2700.0 0.78 2.5 5.0 23.0 260.0 520.0 1.7 3.9 11.0 44.0 121.0 217.0 7.6 5.1 2.9 1.4 0.79 0.40 0.34 2.6 1.0 0.64 0.24 0.18 0.80 0.44 0.33 0.21 0.12 0.061 - 1.1 0.57 0.29 0.24 0.14 0.08 0.04 0.021 0.75 0.54 0.21 0.15 0.059 0.016 0.013 0.32 0.20 0.11 0.057 0.032 0.016 0.012 1.0 0.55 0.25 0.21 0.12 0.077 0.038 0.019 0.009 0.45 0.18 0.13 0.051 0.014 0.011 0.15 0.086 0.044 0.024 0.012 0.008 STANDARD INDUCTANCE VALUE The following standardization chart is offered for your design and ordering convenience. Each value listed is within one percent of the preceding and succeeding values shown. All decade multiples of these values, within the range shown for each model in the chart, are Vishay Dale standard values. (Example: For a TE-3, 200 µH, 20 mH and 200 mH are all decade multiples of 2.00 and are all standard values.) Document Number: 34078 Revision: 02-Jun-06 1.00 1.02 1.05 1.07 1.10 1.13 1.15 1.18 1.21 1.24 1.27 1.30 1.33 1.37 1.40 1.43 1.47 1.50 1.54 1.58 1.62 1.65 1.69 1.74 1.78 1.82 1.87 1.91 1.96 2.00 2.05 2.10 2.15 2.21 2.26 2.32 2.37 2.43 2.49 2.55 2.61 2.67 2.74 2.80 2.87 2.94 3.00 3.01 3.09 3.16 3.24 3.32 3.40 3.48 3.57 3.65 For technical questions contact [email protected] 3.74 3.83 3.92 4.00 4.02 4.12 4.22 4.32 4.42 4.53 4.64 4.75 4.87 4.99 5.00 5.11 5.23 5.36 5.49 5.62 5.76 5.90 6.00 6.04 6.19 6.34 6.49 6.65 6.81 6.98 7.00 7.15 7.32 7.50 7.68 7.87 8.00 8.06 8.25 8.45 8.66 8.87 9.00 9.09 9.31 9.53 9.76 www.vishay.com 57 TE and TD Filter Inductors, Toroid Vishay Dale PERFORMANCE GRAPHS: INDUCTANCE VS DC BIAS, INDUCTANCE VS AC EXCITATION TE-3, TD-3 % INDUCTANCE CHANGE 0 DC EFFECT -5 Q3 - 10 Q4 AC EFFECT Q0 - 15 DC EFFECT - 20 - 25 Q3 Q4 1 10 100 1000 10,000 INDUCTOR CURRENT IN mA x ⎟ INDUCTANCE IN mH TE-4, TD-4 Q0 DC EFFECT % INDUCTANCE CHANGE 0 -5 - 10 Q4 Q3 - 15 - 20 DC EFFECT - 25 Q4 1 10 100 AC EFFECT Q3 1000 10,000 INDUCTOR CURRENT IN mA x ⎟ INDUCTANCE IN mH TE-5, TD-5 DC EFFECT % IN DUCTANCE CHANGE 0 Q0 -5 Q4 - 10 Q3 AC EFFECT - 15 DC EFFECT - 20 - 25 Q4 1 10 100 Q3 1000 10,000 INDUCTOR CURRENT IN mA x ⎟ INDUCTANCE IN mH www.vishay.com 58 For technical questions contact [email protected] Document Number: 34078 Revision: 02-Jun-06 TE and TD Filter Inductors, Toroid Vishay Dale PERFORMANCE GRAPHS: TYPICAL Q VS FREQUENCY TE-3, TD-3 TE-4, TD-4 Q0 Q0 1000 “Q” “Q” 1000 100 3.3 mH 1 mH 330 µH 150 µH 100 50 µH 15 mH 20 mH 10 10 mH 100 1000 10,000 10 100 FREQUENCY - kHz 1000 10,000 FREQUENCY - kHz Q3 Q3 1000 “Q” 1000 “Q” 1 mH 10 10 100 1 H 100 100 mH 1 H 1 mH 10 mH 100 mH 10 10 mH 1 mH 10 1 10 100 1 1000 10 100 1000 FREQUENCY - kHz FREQUENCY - kHz Q4 Q4 100 1000 “Q” “Q” 3.3 mH 10 1 H 4 H 100 mH 10 mH 2 mH 100 1 mH 7.5 H 100 mH 1 H 10 mH 10 1 1 10 100 1000 0.1 FREQUENCY - kHz Document Number: 34078 Revision: 02-Jun-06 For technical questions contact [email protected] 1 10 100 FREQUENCY - kHz www.vishay.com 59 TE and TD Filter Inductors, Toroid Vishay Dale PERFORMANCE GRAPHS: TYPICAL Q VS FREQUENCY TE-5, TD-5 Q3 Q0 1000 1000 “Q” “Q” 5 mH 100 100 mH 10 mH 100 1 mH 2 H 10 330 mH 100 mH 10 1 10 100 0.1 1000 1 FREQUENCY - kHz 10 100 FREQUENCY - kHz Q4 “Q” 1000 100 20 H 100 mH 1 H 10 mH 10 0.1 1 10 100 FREQUENCY - kHz MARKING - Vishay Dale - Model - Q type - TC code - Inductance value - Inductance tolerance - Date code www.vishay.com 60 For technical questions contact [email protected] Document Number: 34078 Revision: 02-Jun-06 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1