TE www.vishay.com Vishay Sprague Aluminum Capacitors Little-Lytic Electrolytics FEATURES DESCRIPTION VALUE Operating temperature Tolerance on CR Ripple current Life validation test 2000 h at + 85 °C - 40 °C to + 105 °C G = + 75 %, - 10 % and F = + 50 %, - 10 % 10 to 600 max. at 120 Hz, depending upon capacitance After test, capacitance value shall not have changed by more than ± 20 %, the equivalent series resistance in ohms shall not have exceeded 150 % of initial requirement and the leakage current shall not have exceeded the initial requirement. DC leakage current Maximum DC leakage current at + 25 °C for all capacitors is 15 μA, except units in case code DD, which is 15.8 μA. Shelf test 250 h at + 85 °C, with no voltage applied The capacitance and equivalent series resistance shall meet the initial requirements and the DC leakage current shall not exceed 300 % of the initial requirement. CAPACITANCE VS. TEMPERATURE Capacitance Ratio at 120 Hz QUICK REFERENCE DATA • Proven dependable performance in the industrial and electronic equipment with either transistor or modified electron-tube circuits • All terminal connections welded, eliminating possibility of open or intermittent contacts occasionally found in pressure joints of conventional capacitors • Superior in size, performance characteristics, shelf life, construction and reliability • Metal-encased with clear plastic outer insulating sleeve • Excellent circuit performance when used as coupling capacitors • Minimum drain and long battery life when used in battery bypass applications • Better performance under life test than most miniature aluminum electrolytic capacitors • Axial lead • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 1.2 800 µF - 3 V 300 µF - 16 V 200 µF - 25 V 100 µF - 50 V 25 µF - 100 V 1.1 1.0 Typical 0.9 - 40 - 20 0 + 20 + 40 + 60 Temperature in °C + 80 + 100 + 120 DIMENSIONS in inches [millimeters] CASE CODE D L CASE CODE D L 0.848 [21.539] BA 0.260 [6.604] 0.536 [13.614] DC 0.385 [9.779] BB 0.260 [6.604] 0.723 [18.364] DD 0.385 [9.779] 0.973 [24.714] CB 0.322 [8.179] 0.723 [18.364] DF 0.385 [9.779] 1.286 [32.664] DH 0.385 [9.779] 1.536 [39.014] CC 0.322 [8.179] 0.848 [21.539] DB 0.385 [9.779] 0.723 [18.364] DIMENSIONS AND AVAILABLE FORMS 1.500 [38.10] min. L 1.500 [38.10] min. D 0.032 [0.811] dia. No. 20 AWG tinned copper leads Revision: 28-Aug-12 Document Number: 42042 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TE www.vishay.com Vishay Sprague ORDERING EXAMPLE Order by distribution part no. Example: TE1055 Note • For lead (Pb)-free/RoHS compliant products add the suffix “-E3” to the shortened Distribution part. no. Example: TE1055-E3 Note • For lead (Pb)-free/RoHS compliant products add the suffix “E3” to the standard OEM part no. Example: 30D256G003BA2E3 ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) CASE CODE 1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0 15.0 20.0 25.0 50.0 75.0 100.0 200.0 300.0 500.0 BA CB CC DC DF 1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0 15.0 20.0 25.0 35.0 50.0 75.0 100.0 200.0 250.0 300.0 400.0 500.0 600.0 BA BB BB CB DC DD DD DF DH DH DISTRIBUTOR PART NUMBER DESCRIPTOR PART NUMBER See 50 WVDC listing See 50 WVDC listing See 50 WVDC listing See 50 WVDC listing See 25 WVDC listing See 25 WVDC listing See 25 WVDC listing See 16 WVDC listing See 12 WVDC listing See 6 WVDC listing TE1055 See 6 WVDC listing See 6 WVDC listing TE1059.5 TE1064 TE1066 TE1068 30D256G003BA2 30D107G003CB2 30D207G003CC2 30D307G003DC2 30D507G003DF2 See 50 WVDC listing See 50 WVDC listing See 50 WVDC listing See 50 WVDC listing See 25 WVDC listing See 25 WVDC listing See 25 WVDC listing See 16 WVDC listing See 12 WVDC listing TE1090 See 16 WVDC listing TE1093 TE1100 TE1101.5 See 12 WVDC listing TE1104 TE1105 TE1106 TE1107 TE1107.5 TE1108.5 30D206G006BA2 30D356G006BB2 30D506G006BB2 30D756G006CB2 30D207G006DC2 30D257G006DD2 30D307G006DD2 30D407G006DF2 30D507G006DH2 30D607G006DH2 3 WVDC 6 WVDC Revision: 28-Aug-12 Document Number: 42042 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TE www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) CASE CODE DISTRIBUTOR PART NUMBER DESCRIPTOR PART NUMBER 12 WVDC 1.0 - See 50 WVDC listing - 2.0 - See 50 WVDC listing - 3.0 - See 50 WVDC listing - 4.0 - See 50 WVDC listing - 5.0 - See 25 WVDC listing - 6.0 - See 25 WVDC listing - 8.0 - See 25 WVDC listing - 10.0 - See 16 WVDC listing - 15.0 BA TE1129 30D156G012BA2 20.0 - See 16 WVDC listing - 25.0 - See 16 WVDC listing - 50.0 - See 16 WVDC listing - 60.0 CB TE1133.5 30D606G012CB2 75.0 - See 16 WVDC listing - 100.0 CC TE1135 30D107G012CC2 150.0 - See 16 WVDC listing — 200.0 - See 16 WVDC listing — 250.0 - See 16 WVDC listing — 290.0 DF TE1139 30D297G012DF2 16 WVDC 1.0 - See 50 WVDC listing - 2.0 - See 50 WVDC listing - 3.0 - See 50 WVDC listing - 4.0 - See 50 WVDC listing - 5.0 - See 25 WVDC listing - 6.0 - See 25 WVDC listing - 8.0 - See 25 WVDC listing - 10.0 BA TE1155 30D106G016BA2 15.0 - See 25 WVDC listing - 20.0 BB TE1157 30D206G016BB2 25.0 BB TE1157.1 30D256G016BB2 30.0 - See 25 WVDC listing - 35.0 - See 25 WVDC listing - 50.0 CB TE1160 30D506G016CB2 75.0 CC TE1161 30D756G016CC2 100.0 DC TE1162 30D107G016DC2 150.0 DD TE1163 30D157G016DD2 200.0 DF TE1164 30D207G016DF2 250.0 DF TE1164.5 30D257G016DF2 300.0 DH TE1165.5 30D307G016DH2 350.0 DH TE1166 30D357G016DH2 Revision: 28-Aug-12 Document Number: 42042 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TE www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) CASE CODE 1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0 15.0 20.0 25.0 30.0 35.0 50.0 75.0 100.0 150.0 200.0 BA BA BA BB BB CB CB CB CB CC DC DD DF DH 1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0 15.0 20.0 25.0 35.0 50.0 75.0 100.0 BA BA BA BA BB BB BB CB CB CC CC DC DD DF DH 1.0 2.0 3.0 4.0 5.0 10.0 15.0 20.0 25.0 30.0 BA BB CB CB CC DC DD DF DH DH 1.0 2.0 3.0 4.0 5.0 8.0 10.0 15.0 20.0 BA BB CB CC CC DC DD DF DH DISTRIBUTOR PART NUMBER DESCRIPTOR PART NUMBER See 50 WVDC listing See 50 WVDC listing See 50 WVDC listing See 50 WVDC listing TE1202 TE1203 TE1203.5 TE1204 TE1205 TE1206 TE1207 TE1207.5 TE1208 TE1209 TE1210 TE1211 TE1212 TE1213 30D505G025BA2 30D605G025BA2 30D805G025BA2 30D106G025BB2 30D156G025BB2 30D206G025CB2 30D256G025CB2 30D306G025CB2 30D356G025CB2 30D506G025CC2 30D756G025DC2 30D107G025DD2 30D157G025DF2 30D207G025DH2 TE1300 TE1301 TE1302 TE1302.1 TE1303 TE1303.1 TE1303.3 TE1304 TE1304.2 TE1305 TE1305.5 TE1306 TE1307 TE1308 TE1309 30D105G050BA2 30D205G050BA2 30D305G050BA2 30D405G050BA2 30D505G050BB2 30D605G050BB2 30D805G050BB2 30D106G050CB2 30D156G050CB2 30D206G050CC2 30D256G050CC2 30D356G050DC2 30D506G050DD2 30D756G050DF2 30D107G050DH2 TE1400 TE1401 TE1402 TE1403 TE1404 TE1407 TE1408 TE1409 TE1410 TE1411 30D105F100BA2 30D205F100BB2 30D305F100CB2 30D405F100CB2 30D505F100CC2 30D106F100DC2 30D156F100DD2 30D206F100DF2 30D256F100DH2 30D306F100DH2 TE1500 TE1501 TE1502 TE1503 TE1504 TE1506 TE1507 TE1508.1 TE1509 30D105F150BA2 30D205F150BB2 30D305F150CB2 30D405F150CC2 30D505F150CC2 30D805F150DC2 30D106F150DD2 30D156F150DF2 30D206F150DH2 25 WVDC 50 WVDC 100 WVDC 150 WVDC Revision: 28-Aug-12 Document Number: 42042 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000