TS53 Vishay Sfernice Surface Mount Miniature Trimmers Single-Turn Cermet Sealed FEATURES • 0.25 W at 70 °C • For PCB version see T53Y series • Wide ohmic range (10 Ω to 1 MΩ) • Small size for optimum packing density • Suitable for both manual or automatic operation • RoHS compliant since data code 0445 The TS53 trimming potentiometer has been designed for surface mount applications and offers volumetric efficiency (5 x 5 x 2.7 mm) with high performance and stability. The TS53 design is suitable for both manual or automatic operation, and can withstand wave, and reflow soldering techniques. DIMENSIONS in millimeters (± 0.25 mm) RECOMMENDED SOLDERING AREAS TS53YL TS53YJ TS53YL TS53YJ 5 5 0.20 2.7 2.7 0.20 2 6.4 5.5 0.65 1.1 2 b 1.3 b 2 1.3 5.5 4 1.3 2 1.3 c 0.9 × 0.20 1 × 0.20 a b A6 b 5 a 2.3 2.30 c c Cruciform screwdriver slot Ø 2.5, width 0.5 Deep: 0.55 Max. deep (center): 0.7 www.vishay.com 18 c a 2.3 a 5 103 2.30 0.9 x 0.20 1 x 0.20 Tolerances unless otherwise specified ± 0.25 mm For technical questions, contact: [email protected] Document Number: 51008 Revision: 22-Dec-08 TS53 Surface Mount Miniature Trimmers Single-Turn Cermet Sealed Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive Element Cermet Electrical Travel 220° ± 15° 10 Ω to 1 MΩ Resistance Range Standard Series 1-2-5 Tolerance Standard ± 20 % CIRCUIT DIAGRAM Variation Law c a linear (3) (1) cw b (2) 0.25 W at 70 °C 0.25 POWER IN W 0.20 Power Rating 0.15 0.10 0.05 0 0 20 40 60 70 100 120 140 155 AMBIENT TEMPERATURE IN °C Temperature Coefficient See Standard Resistance Element Data Limiting Element Voltage (Linear Law) 200 V 1 % or 3 Ω Contact Resistance Variation End Resistance (Typical) 0.1 % or 3 Ω Dielectric Strength (RMS) 1000 V Insulation Resistance 1 GΩ MECHANICAL SPECIFICATIONS Mechanical Travel 270° ± 10° Operating Torque (max. Ncm) 1.5 End Stop Torque (max. Ncm) 3.5 Net Weight (max. g) 0.15 Terminals Pure Sn (e3) ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 °C to + 125 °C 55/125/56 Sealed container IP67 MSL Level Document Number: 51008 Revision: 22-Dec-08 4 For technical questions, contact: [email protected] www.vishay.com 19 TS53 Surface Mount Miniature Trimmers Single-Turn Cermet Sealed Vishay Sfernice PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS ΔRT (%) RT CONDITIONS ΔR1-2 (%) R1-2 1000 hours at rated power 90'/30' - ambient temperature + 70 °C ±2% ±2% ±3% Climatic Sequence Phase A dry heat 125 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles Temperature 40 °C - RH 93 % 56 days ±2% ±3% Long Term Damp Heat Load Life Thermal Shock 55 °C to + 125 °C - 5 cycles Rotational Life (Electrical and Mechanical) Shock 100 cycles - rated power 10 - 55 Hz 0.75 mm or 10 g - 6 hours ±1% ΔV1-2 ≤±1% V1-3 MAX. CUR. MAX. MAX. POWER WORKING THROUGH AT 70 °C VOLTAGE ELEMENT W V mA 0.25 1.58 2.24 3.54 5.00 7.07 11.2 15.8 22.4 35.4 50.0 70.7 112 158 200 200 200 158 112 71 50 35 22 16 11 7 5 3.5 2.2 1.6 1.0 0.4 0.2 0.25 0.20 0.08 0.04 ± (3 % + 5 Ω) ΔV1-2 ≤±1% V1-3 LINEAR LAW Ω ΔV1-2 ≤±2% V1-3 ±1% ±1% STANDARD RESISTANCE ELEMENT DATA 10 20 50 100 200 500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1M Dielectric strength: 1000 V RMS Insulation resistance: > 104 MΩ 50 g - 11 ms 3 successive shocks in 3 directions Vibration STANDARD RESISTANCE VALUES ±3% Contact resistance variation: ΔR < 1 % Rn TYPICAL TCR - 55 °C + 125 °C ppm/°C MARKING VISHAY trademark, ohmic value, manufacturing date. The ohmic value is indicated by a 3 figure code, the first two are significant figures, the third one is the multiplier. Example: 100 = 10 Ω 101 = 100 Ω 102 = 1000 Ω 503 = 50 000 Ω SOLDERING RECOMMENDATIONS See Application notes CAUTION ± 100 Reflow soldering must be done within 72 h while stored under a max. temperature of 30 °C, 60 % RH after opening the dry pack envelope. RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the hermetic bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 72 h under these conditions, moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers (not suitable for reel) or 24 h at 125 °C + 5 °C (not suitable for reel) www.vishay.com 20 For technical questions, contact: [email protected] Document Number: 51008 Revision: 22-Dec-08 TS53 Surface Mount Miniature Trimmers Single-Turn Cermet Sealed Vishay Sfernice PACKAGING On tape and reel of 500 pieces, code R10 (TR500) and 2000 pieces, code R20 (TR2000) 2 3 solts - width 2 to 120° - ø ext. 23 Ø 12.7 Ø 70 Ø 178 ±2 13 8 5.2 0.3 7.6 12 2 5.5 3.2 4 1.75 Ø 1.5 Cover tape panel strength specifications EIA 481 A and CEI 60286-3. DRYPACK Devices are packed in moisture barrier bags to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. SAP ORDERING INFORMATION (Part Number 15 digits) T S 5 MODEL 3 Y L 5 0 4 M R 1 0 STYLE OHMIC VALUE TOLERANCE PACKAGING YL YJ From 10 Ω to 1 MΩ 504 = 500 kΩ ± 20 % R10 = Reel 500 pieces R20 = Reel 2000 pieces SPECIAL NUMBER (if applicable) Given by VISHAY for custom design PART NUMBER DESCRIPTION (for information only) TS53 YL 500K 20 % MODEL STYLE VALUE TOLERANCE Document Number: 51008 Revision: 22-Dec-08 SPECIAL For technical questions, contact: [email protected] TR500 e3 PACKAGING LEAD (Pb)-FREE www.vishay.com 21 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000